• Tidak ada hasil yang ditemukan

Assessing Strategies of Building Information Modeling (BIM) Implementation in Sarawak Construction Industry

N/A
N/A
Protected

Academic year: 2024

Membagikan "Assessing Strategies of Building Information Modeling (BIM) Implementation in Sarawak Construction Industry"

Copied!
2
0
0

Teks penuh

(1)

IOP Conference Series: Earth and Environmental Science

PAPER • OPEN ACCESS

Assessing Strategies of Building Information Modeling (BIM) Implementation in Sarawak Construction Industry

To cite this article: A Ahmad Zaini et al 2020 IOP Conf. Ser.: Earth Environ. Sci. 498 012086

View the article online for updates and enhancements.

This content was downloaded from IP address 49.50.236.213 on 02/07/2020 at 04:24

(2)

Content from this work may be used under the terms of theCreative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Published under licence by IOP Publishing Ltd

IConCEES 2019

IOP Conf. Series: Earth and Environmental Science 498 (2020) 012086

IOP Publishing doi:10.1088/1755-1315/498/1/012086

1

Assessing Strategies of Building Information Modeling (BIM) Implementation in Sarawak Construction Industry

A Ahmad Zaini1*, A W Razali1, H C Gui1, N Zaini1 and S D Tamjehi1

1 Department of Quantity Surveying, Faculty of Built Environment, Universiti Malaysia Sarawak (UNIMAS), Malaysia

*Corresponding author: [email protected]

Abstract. The implementation of Building Information Modeling (BIM) in a construction project is gaining momentum across the globe particularly in developing countries. BIM implementation has been exceptionally slow in the construction industry in comparison to industries such as manufacturing and engineering. The construction industry in Sarawak is beginning to change as building clients and authorities mandated the use of BIM consistent with the CIDB transformation roadmap and Industrial Revolution 4.0. This paper is a part of a research project that examines the strategies associated with the implementation of Building Information Modeling (BIM) in Sarawak construction industry. BIM allows projects to be built virtually before they are constructed physically whilst removing inefficiencies and ability conflicts that may arise all through the construction process. Whilst BIM is presently receiving high volumes of attention around the world, it appears that well-known understanding of it’s far still tremendously low. Thus, it requires a study to determine what are the strategies that could enhance the BIM implementation in the Sarawak construction industry. A questionnaire survey was conducted among 300 respondents from diverse construction stakeholders in Sarawak and 133 questionnaire surveys were returned for analysis. The collected data were analysed for descriptive, mean and factor analysis using IBM SPSS version 25 software. It was found that

“subsidizing the price for BIM software” is the top-ranked strategy with a mean score of 8.1805.

Subsequently, the results for factor analysis revealed that all factors for BIM implementation strategies were above 0.854. The key finding was the identification of the importance of government support to ensure successful BIM implementation in the Sarawak construction industry. Other important strategies identified include a strategic approach model to assist construction players to implement BIM and cooperation among BIM practitioner, academia and researcher to educate and expose BIM to students in institutions.

1. Introduction

Building Information Modelling (BIM) is a management-enhancing method. BIM enhances the power to develop a model layout that can be used from the initial stage to completion in a similar way as during the entire building occupancy. It is viewed as a central facet of construction management. Nevertheless, the use of BIM as an effective instrument for construction management remains at the preliminary stage within the construction industry as compared to other industries such as manufacturing and technology as a result of the construction is still based on the traditional design-bid-build method [1]. BIM is a new approach to design, betting on the extent to which architects, clients, engineers, contractors and consultants work together. It is a team approach in which all professional inputs are captured within the same model [2].

Referensi

Dokumen terkait

The impact of BIM concept in three categories of construction are observed, in the construction stage Handover the project work criteria is in the first rank with 3.8 mean and

The study revealed that the major barriers to the adoption and implementation of BIM can be attributed to contractual issues such as licencing, insurance etc., and personnel

Desain Penelitian Metode dilakukan dengan mengaplikasikan sistem Building Information Modeling BIM pada struktur bangunan gedung hotel 10 lantai dengan luas area 2000 m2 menggunakan

Challenges of BIM technology in IBS application amongst Malaysian construction players Mean value Standard deviation Technology High cost for new technology and only large

Series: Earth and Environmental Science 1282 2023 012034 IOP Publishing doi:10.1088/1755-1315/1282/1/012034 Improved Quality of Wood Plastic Composite WPC Through the Addition of

Series: Earth and Environmental Science 1187 2023 012012 IOP Publishing doi:10.1088/1755-1315/1187/1/012012 been done about optimization of silica extraction process from boiler ash,

The scope of study in this research is in the form of 3D modeling Building Information Modeling BIM on drainage channel design in the UB Forest Sumberwangi area with software Autodesk

Series: Earth and Environmental Science878 2021 012057 IOP Publishing doi:10.1088/1755-1315/878/1/012057 Designating the preference of tram shelter as a part of transit- oriented