The delivery schedule expressed as weeks/months stipulates hereafter a delivery date which is the date of delivery to the project site.
Item
No. ITEM Qty. Delivery
Date
1
BASIC HYDRAULIC SYSTEM TRAINING EQUIPMENT
a. 2 units - 1x 4/2-way hand lever valve
b. 1 unit - 1x 4/3/-way hand lever valve re circulating mid-position c. 1 unit - 1x pressure relief valve /Pressure sequence valve d. 1 unit - 1x Pressure relief valve, piloted
e. 1 unit - 1x 3-way pressure reducing valve f. 1 unit - 1x 2-way flow control valve g. 1 unit - 1x non return valve, de-lockable
h. 1 unit - 1x Diaphragm accumulator with shut- off valve i. 2 units - 1x hydraulic motor
j. 2 units - 1x double acting cylinder, 16/10/200 k. 1 unit - 1x weight
l. 1 unit - 1x non return valve 0.1 Mpa m. 1 unit - 1x non return valve 0.5 Mpa n. 1 unit - 1x flow control valve
o. 1 unit - 1x One-way flow control valve p. 1 unit - 1x Shut-off valve
q. 1 unit - 7x Branch tee r. 2 units - Pressure gauge
s. 1 unit 2/2 way stem actual valve t. 1 unit shut-off counter balancing valve NECESSARY ACCESSORIES:
a. Aluminum profile 1100x700mm
b. 10 hose line with quick release coupling (600mm) c. 10 hose line with quick release coupling (1000mm) d. 10 hose line with quick release coupling (1500mm) e. measuring case
f. pressure relief unit
Hydraulic power unit:
Double pump with one motor can be integrate into lean line workplace system Pump design: double external gear pump
Number of pumps: 2
Actuation: Manual via ON/OFF switch Operating pressure:6 Mpa (60bar) Oil tank capacity: 401
Duty cycle: 100%
Dimension: 700x320x550mm (W x D x H) Weight: 65 kg
Power unit with AC current motor single phase
1 Unit
Thirty (30) days upon receipt
of Notice
to
Proceed
Nominal voltage: 230V, nominal power rating:1.1 KW, frequency: 60hz, delivery rate at nominal speed: 2x3.8 1/min at 1350 rpm
Protective cover for weight:
TRAINING AIM:
Learning about valves and devices
Function and application of various valves and devices Measuring variables such as pressure, flow and time Calculating surface ratio, force, output and speed Physical fundamentals of hydraulics
Applying basic hydraulic equations Using symbols according to DIN/ISO 1219 Drawing displacement-step diagrams Drawing hydraulic circuits
Constructing and commissioning control system, including trouble shooting RECOMMENDED TRAINING MEDIA:
Textbook hydraulics, Basic level WBT Fundamentals of hydraulics
Design and simulation program, FluidSIM/Hydraulics Transparency set hydraulics
Video Hydraulics, Basic level Transparent models, Hydraulics Workbook Hydraulic, Basic level OTHER REQUIREMENTS:
1. Ten (10) years warranty on service and two (2) years guarantee on all parts.
2. Commissioning of the machine including training for faculty.
3. Regular monthly maintenance and inspection for the first two (2) years 4. The supplier must have existing offices for last 5 years.
5. The supplier must have distributed/supplied machine tools for the last 10 years in 5 or different agencies having no problem in the requirements.
6. Reconditioned machine are not acceptable 7. DIN ISO 1219
ALEXANDER DR. DELA PAZ, Ed.D. RAUL R. BERNALDEZ ENGR. PEDRO CUSTODIO Dean of CIT-End User TWG TWG
Section VI. Schedule of Requirements
The delivery schedule expressed as weeks/months stipulates hereafter a delivery date which is the date of delivery to the project site.
Item
No. ITEM Qty. Delivery Date
1
ELECTRO HYDRAULIC SYSTEM TRAINING EQUIPMENT
ELECTRO-HYDRAULIC SYSTEM TRAINING EQUIPMENT a. 1 unit - 1x signal input electrical
b. 1 unit - 1x indicator unit and distributor ,electrical c. 1 unit - 2x relay, three fold
d. 1 unit - 2x limit switch, electrical, left actuated e. 2 units - 2x limit switch, electrical, right actuated f. 2 units - 1x 4/2-way solenoid valve
g. 2 units - 1x 4/3-way solenoid valve with closed mid-position h. 1 unit - 1x non return valve , de-lockable
i. 1 unit - 2x Pressure relief valve/ Pressure sequence valve j. 1 unit - 1x 2-way flow control valve
k. 2 units - 1x double acting cylinder, 16/10/200 l. 2 units - 1x hydraulic motor
m. 1 unit - 1x one-way flow control valve n. 1 unit - 1x non return valve 0.1 Mpa o. 1 unit - 1x non-return valve 0.5 Mpa p. 2 units - 3x pressure gauge
q. 1 unit - 8x branch tee r. 1 unit - 1x weight
s. 1 unit - 1x diaphragm accumulator with shut of block t. 1 unit - 1x emergency OFF push button electrical u. 2 units - 1x proximity switch, inductive
v. 2 units - 1x proximity switch, capacitive w. 2 units - 1x proximity switch, optical x. 2 units - 1x pressure switch
y. 1 unit - 1x Time relay
z. 1 unit - 1x Preset counter, electrical, incrementing aa. 1 unit - 1x indicator unit and distributor, electrical
NECESSARY ACCESSORIES:
Aluminum profile 1100 x 700mm
10 hose line with quick release coupling (600mm) 10 hose line with quick release coupling (1000mm) 10 hose line with quick release coupling (1500mm) measuring case
Pressure relief unit
Table top power supply/ power supply unit for the mounting frame Cable set, universal with 4 mm safety plugs
Hydraulic power unit:
Double pump with one motor can be integrate into lean line workplace system
1 Unit
Thirty (30) days upon receipt of
Notice to
Proceed
Pump design: double external gear pump Number of pumps: 2
Actuation: Manual via ON/OFF switch Operating pressure:6 Mpa (60bar) Oil tank capacity: 401
Duty cycle: 100%
Dimension: 700x320x550mm (W x D x H) Weight: 65 kg
Power unit with AC current motor single phase Nominal voltage: 230V, nominal power rating:1.1 KW, frequency: 60hz, delivery rate at nominal speed: 2x3.8 1/min at 1350 rpm
Protective cover for weight:
TRAINING AIMS:
Learning about valves and devices and their function Learning about electrical components
Using symbols according to DIN/ ISO 1219 Drawing displacement-step diagrams
Drawing electrical and hydraulic circuits diagrams
Constructing and commissioning control system, including trouble shooting
Basic Hydraulic circuits
RECOMMENDED TRAINING MEDIA:
Design simulation program, FluidSIM / Hydraulics Textbook Electro-hydraulics, basic level
Transparency set, Fundamentals of Electro hydraulics DVD Electro-pneumatics/ Electro hydraulic
Fundamentals of Electro hydraulics Workbook Electro-hydraulics,Basic level OTHER REQUIREMENTS:
1. Ten (10) years warranty on service and two (2) years guarantee on all parts.
2. Commissioning of the machine including training for faculty.
3. Wiring and other items needed to connect and operate the machine to the BSU power source.
4. Regular monthly maintenance and inspection for the first two (2) years 5. The supplier must have existing offices for last 5 years.
6. The supplier must have distributed/supplied machine tools for the last 10 years in 5 or different agencies having no problem in the requirements.
7. Reconditioned machine are not acceptable 8. DIN ISO 1219
ALEXANDER DR. DELA PAZ, Ed.D. RAUL R. BERNALDEZ ENGR. PEDRO CUSTODIO Dean of CIT-End User TWG TWG