Republic of the Philippines
MSU-ILIGAN INSTITUTE OF TECHNOLOGY
Office of the Bids and Awards Committee
Office of the BAC Secretariat, 3rd Flr, MSU-IIT Canteen Annex, Tibanga, Iligan City Telefax No. (063) 225-4926
INVITATION TO Bid
A. The MSU- Iligan Institute of Technology through its Bids and Awards Committee invites interested suppliers to apply for eligibility and to bid for the hereunder project:
Name of Project :
Supply of Various Laboratory Equipment & Materials for use of College of EngineeringLocation :
MSU-Iligan Institute of TechnologyApproved Budget :
PhP13,495,508.00Source of Fund :
TRUSTDelivery Period : Sixty (60) days upon receipt of P.O.
Non-refundable Bidder Fee :
0.002 of the Approved Budget CostReference No. :
2013-003Note: Awarding is on per item basis
1 1 set ACCELEROGRAPH
Specifications:
Sensor Channels: 3 standard
Input Lever: Balanced: Balanced; ±10V or ± 2.5V differential ADC: 24-bit Delta Sigma Converter with 32-bit DSP
Anti-alias Filter: Minimum phase or linear phase FIR filter Sampling Rates: 100 200 500 sps
Dynamic Range: >128 dB @ 200 sps
Frequency Response: DC to 80 Hz @ 200 sps Recording: Internal Trigger Type
Trigger Input: enable / disabled; programming setting Recording Format: Compressed data
pre-event Recording: 1S50S ; post-event Recording: 0S300S Data Storage: Compact Flash Card (128MB) or IDE Flash disk (16M) Includes: Installation of the Equipment and Training for the End User is required
250,000.00 250,000.00
2 1 SHAKE TABLE Specification:
Table Size: 70 cm x 60 cm; Maximum specimen weight:: 50kg Frequency of operation: 0.1 ~ 50 Hz
Nominal Performance: X axis Z axis; Stroke: ±0.150m ±0.075m Velocity: 762 mm /sec 500mm/sec ; Acceleration: ±1.15g ±2.30g Weight of Table: 20kg ; Max Displacement: ±7.5 cm
Max force (theoretical): 1000 N ; Max Motor Torque: 1 N.m Servo Motor Power: 750 W (with accessories for data logging &
printing)
Includes: Installation of the Equipment and Training for the End user is required
200,000.00 200,000.00
3 1 LOT 3-AXES CNC MACHINING CENTER Description:
It is a machining center where lathe and milling operations are carried out efficiently by employing Computer Numerically Controlled (CNC) operations.
Specifications:
Minimum X-axis travel = 800mm/31.5in (Longitudinal Travel) Minimum Y-axis travel = 400mm/15.75in (Cross Travel) Minimum Z-axis travel = 500mm/19.7in (Vertical Travel) Minimum Workable size (L x W) = 800mm x 400mm or 31.5in x 15.75in
Minimum T-slot = 3 x 14mm x 110mm Maximum Load on table = 400kg Spindle speed range = 200-8000 rpm Spindle Taper = BT40 or CAT40
X,Y,Z rapid traverse=12000mm/min or 39ft/min Maximum Cutting Rate = 10000mm/min or 32.8ft/min Maximum Tool Shank Diameter = Ø 13mm or 0.50in Maximum Tool Length = 250mm or 9.85in
Maximum Tool change Time = 7 sec.
Pulse equivalent = 0.001mm
Repeatability Positioning Accuracy = 0.005mm to 0.01mm Spindle Motor Power = 7.5kW or 10 Hp
Maximum Torque = 50N-m ; X/Y/Z Axis Motor Power = 1.5kW to 2.3kW
Servo Motor with brake on Z-axis ; Control = FANUC System Automatic Lubrication Pump; Coolant Pump
Comes Complete with Accessories and Tools
Includes training in operation the machine at MSU-IIT.
Alternative venue for training outside MSU-IIT will be at the supplier’s expense.
3,000,000.00 3,000,000.00
4 1 set STAND ALONE PHOTOVOLTAIC POWER SYSTEM Specifications:
230W Solar Panel Module Rating ; Extra solar Panel Modules Accessories (Batteries, Converters, PV Cable, controller, PV connectors, MCA connectors pair)
200,000.00 200,000.00
5 1 set HEAVY-DUTY FLOWMETERS with TOTALIZER Specifications:
Repeatability: ±0.1% of reading
Maximum pressure: Aluminum 300 psi (21 bar); NPT (F) connections Operating Temperature 14 to 140 F (-10 to 60C)
Wetted materials: Aluminum housing, PVDF rotor an supports, tungsten carbide shaft, 316 SS retainers, and ceramics bearings.
Maximum particular size: 0.125 µm
Display: 6-digit LCD, ½ “H (with floating decimal) Input power: two 3V lithium batteries (included)
1 unit of 1 to 10 GPM Range ; ½” NPT (F) Connection Accuracy: ± 2% of reading ; Body material: Aluminum
1 unit of 5 to 50 GPM Range ; 1” NPT (F) Connection Accuracy: ±1.5% of reading ; Body material: Aluminum
Accessory: 1 unit Output Module
Range Capacity: 4 to 20 mA or 5 to 20 volts
Module provides an output for interfacing with compatible instrumentation
62,557.00
63,765.00
37,976.00
62,557.00
63,765.00
37,976.00
6 1 unit VACUUM OVEN Specifications:
Control
* fuzzy-supported MLC (Multi-level controlling ) microprocessor controller adapting its performance to the volume (local temperature sensing) for each thermoshelf
* temperature measured through 4-wire Pt100 individually for each thermoshelf
*autodiagnostic system with fault indication
* digital 7-day programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
* integrated timer for tempering and pressure (vacuum) profiles of up to 40 ramps, each segment adjustable from 1 min up to 999 hours
* multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up)
* digital display (LED) of all set parameters, such as temperature, weekdays, time, pressure, programme status and set-up values
* separate LED symbol for each thermoshelf in operation
* actual temperature of each thermoshelf to be made visible separately on digital display
* resolution of display for set value 0,1°C below 99,9°C,0,5 °C above 100°C; for actual value 0,1°C
* long-term logging (ring store) of all relevant data, GLP-conforming as data logger = 1024 kB
* USB interface including MEMMERT Software “ Celsius” for control and documentation of temperature and pressure
* chip card control incl. one Memory Card XL with 32 kB (up to 40 ramps)
Vacuum Control
*digital electronic vacuum control through solenoid valves
*adjustment range from 10 to 1100 mbar digital (LED)
* resolution 1 mbar
* digital display of actual pressure from 5 mbar up to 1100 mbar
* one programmable, digitally controlled inlet for air
* rapid air intake for door opening (door blocked under vacuum) – programme reactivation at stored values
* vacuum drying process (vacuum cycles) is being continued after power failure
* works calibration certificate for +160°C at 50 mbar pressure for each thermoshelf supplied with vacuum oven
Multiple Overtemperature Protection
* with audible and visual alarm
354,915.00 354,915.00
* digitally adjustable, electronic microprocessor overtemperature controller TWW maximum value for overtemperature, minimum value for undertemperature
* additional integral over-and under temperature monitor “ASF” (Auto- Safety-Function) automatically following the setpoint value at a preset tolerance range; audible alarm is activated in case of over-or- under temperature, heating of the individual shelf is switched off in case of over-temperature
* resolution of display and setting accuracy: 0,5°C below 99,9°C, 1°C above 100°C
* automatic overtemperature protection for each thermoshelf
separately (MLOP-Multi-Level-Overtemperature Protection) switching the heating off at approx. 3°C above set temperature
* mechanical temperature limiter TB protection class 1 switching the heating off at approx. 20°C above max. oven temperature
Textured Stainless Steel Casing
* w x h x d: 550 x 600 x 400 mm
* full-sight glass door, on the inside a spring-loaded 15mm thick glazed panel in safety glass with anti-splitter screen on the outside
* rear zinc-plated steel Interior – Heating Concept
* w x h x d: 385 x 305 x 250mm, 29 liters
* hermetically welded stainless steel interior of extremely corrosion- resistant, electropolished stainless steel, material no. 1.4404 (ASTM 316L)
* additional interior mountings of stainless steel material no.1.4404 (ASTM 316L ) removable for cleaning, consisting of mounting at the sides with guide bars for thermoshelves, on top (diffuser)
* all tubings made of stainless steel material no. 1.4571 (ASTM 316 TI)
* 1 thermoshelf of aluminum material no. 3.3547 (ASTM B209) with integrated large-area heating
* two connections for thermoshelves in the rear ( 1st and 2nd position) Temperature Range
* from +20°C up to +200°C
* temperature variation in time: < ±0,3 °C ( to DIN 12 880: 2007-05)
* temperature uniformity (surface) at 160°C / 50 mbar: <± 5°C Voltage Power Rating
*230V (± 10%), 50/60Hz
* ca. 1.200 W
7 1 set DIFFERENTIAL SCANNING CALORIMETER 1 pc DSC400F3A01.000-00
Basic system with sample carrier support that provides reproducible adjustment, built-in µV-preamplifier electronics, furnace control, power supply and electric motor driven furnace hoist (basic system).
The system has three magnetic valves and gas frits for purge gas inlet to the sample as standard equipment. It is suitable for measurements under normal atmosphere, in dynamic and static inert gas atmosphere and can be evacuated down to 10E-2 mbar.
Proteus measurement and analysis software for DSC 404 F3 for data acquisition, storage and evaluation under MS WINDOWS, includes Macrorecorder.
Features: Multitasking with simultaneous operation of several thermoanalytical systems and simultaneous evaluations. Graphical interface, integrated detailed HELP system
Detailed information: see technical data sheet DSC/DTA-WINDOWS software
(Hardware requirements: DSC 404 F3, required PC with MS windows and printer per technical datasheet)
1 pc HTP40000A04.020-00
Accessory kit for furnace hoist for one furnace, with manual pivoting mechanism
1 pc HTP40000A10.000-00
MFC gas control block for installation inside the instrument replacing the magnetic valves and gas frits, with 3 inputs and outputs, for non- corrosive and non-explosive gases/gas mixtures, calibrated for N2, default conversion factors for O2, He, Ar, CO2 and synthetic air, other gases/gas mixtures on request, flow rate 5ml/min up to 250 ml/
min with a resolution of 1 ml/min with N2, for software-programmed control and registration of the gas flows.
1 pc HTP40000A84.000-00
Silicon Carbide furnace, working temperarture range 25…1550°C high temperature tube furnace with SiC heating element, integrated exchangeable protective tube for gas flow with stop valve, air-cooled double shell, integrated control thermocouple type S, voltage supply 75 V max.
1 pc DSC404F1A56.000-00
DTA sample carrier system with integrated radiation shield, thermocouples type S and 2 sample crucibles from alumina, temperature range 25 …1650°C
1 pc BA-DSC404F3-EN
Operating instructions DSC 404 F3 english 1 pc Voltage / Frequency: 230V (±10%) / 50Hz
The standard electrical design of the instrument is for a line voltage of 230V, single phase, 50Hz.Please note differing power requirements of some special items (e.g. power supply and sample preparation machines). See item description or installation schematics.
LOCAL PRESSURE REGULATOR - Included
Please see attached for warranty , training and installation terms….
2,510,005.00 2,510,005.00
8 5 pcs. CPX TERMINAL, Type 50E-TO3GCQSYJ-Z-E+NBE
Industrial Programmable Logic controller with Free Teachware
84,258.00 421,290.00
9 1 set CURRENT METER
stream flow velocities 0.04m/s up to 10 meters per second Specifications:
Propeller Rotation Diameter 120mm,
Propeller Hydraulic Pitch: 250mm, Starting Velocity: <0.036 m/s, Velocity measuring Range: 0.04 m/s – 10 m/s,
Meter Body: Material high quality non-corrosive Brass:
* 16 x 2 LCD Display
* Storage for 56 readings, stored in Eoprom (Remains intact even if battery removed)
100,000.00 100,000.00
10 1 lot LOGIC ANALYZER channels – 34 Pattern Generator Channels – 48
High-Speed timing zoom = 4GHz(250ps) with 64K depth Maximum timing sample rate (half/full ch)
Maximum state clock rate = 250MHz with option 250 Maximum state date rate = 250 Mb/s with option 250 Maximum memory depth
- 1M with option 001 - 4M with option 004 - 16M with option 016 - 32M with option 032
Supported signal types = single – ended Automated threshold / sample position
Simultaneous eye diagrams, all channels = Yes Probe Compatibility = 40 pin cable connector
1,200,000.00 1,200,000.00
FOR PCIEERD RESEARCH
11 1 unit ANALYTICAL BALANCE
- advanced microprocessor for accurate weighing results - digital filtering and fast stabilization
- RS-232 Bi-directional interface to communicate to printers or computers
- GLP complaint print outs for better record keeping - Date and time function
- Security slot
- Internal calibration with auto calibration for temperature changes or set time
- Colour coded keys to distinguish frequently used keys
- Large backlit LCD with dual text display and multi-language settings - Capacity tracker to show how much weighing capacity has been used
- up to 16 weighing units (including one custom unit) - robust metal housing
Maximum capacity 220g
Readability 0.1µg
Repeatability 0.2µg
Linearity ±0.2 µg
Pan size 90mm Ø
Units of measurement Gram, milligram, carat, ounce, dram, grain, troy ounce, pennyweight, momme, teals, tical
Interface Bi-directional RS-232 (Standard) Calibration Calibration with internal mass.
Alternatively the user can choose to calibrate using an external mass.
Display Backlit LCD with dual digits (24mm high) and capacity tracker
Power supply 15VCD, 50/60Hz, 800 mA (Input Voltage 100-240V, 50/60 Hz)
Operating Temperature
10 °C to 40°C
Housing Die cast aluminum housing with glass weighing chamber
Draught shield Supplied as standard (factory fitted)
90,000.00 90,000.00
Draught shield dimensions
202mm x 158mm x 215mm
Overall dimensions (w x d x h)
256mm x 524mm x 275mm
Net weight 12kg
- includes accessories: printer, thermal printer paper, anti-vibration table, density determination kit, below balance hanger, security lock and cable, dust cover, in-use cover, RS-232 cable, RS-232 to USB interface cable, data collection program, 100g calibration weight for PW series, and 200g calibration for PW series.
12 1 unit DRYING OVEN
- Double glass observation window - Over temperature protection
- Optional RS 485 interface for software connection - Floor type
Temperature range 10-300 °C
Temperature stability 0.5°C
Timing range 1-9999 min
Shelves 5
Internal size 400 x 350 x 500 mm
Material inner chamber Stainless steel
180,000.00 180,000.00
13 2 units LEACHING COLUMN PLUS ACCESSORIES
- with vacuum chamber to hold a fraction collector needed for column leaching
- round vacuum chamber is made of steel with clear, thick and hard plastic cover
- other major components includes: syringe pump, fraction collector, soil column (flow cell) and vacuum pressure regulator
Inside diameter 18.0 in.
Inside height 10.5 in.
Includes: Installation of equipment and training for end user is required.
280,000.00 560,000.00
14 1 unit Eh-pH, TEMPERATURE METER
- measures voltage, pH and temperature of the solution
Measuring range pH 0.00~14.00
mV 0~±1999 mV
Temperature 0-100°C
Accuracy pH ±0.01 pH
mV 1 mV
Temperature 0.1°C
Resolution pH 0.01
mV 1mV
Temperature 0.1°C
Power supply 1 x 9V battery
Dimensions 123mm x 72mm x
33mm
Weight 238 g
Display 4-digital LCD
70,000.00 70,000.00
15 1 set PIPETTE CONTROLLER
- A motorized pipette filler for faster filling and dispensing - Silicon bulb and thumb lever for aspiration and dispensing - With three aspiration and dispensing speeds with finger triggers
Maximum operating hour 8 hours after recharging
Pipette volumes One set: 5 ml,10ml, 25ml, 50ml, 100ml, 250ml, 500ml
Weight 180g
Supplies Integral 0.45 and 0.2µm
hydrophobic filter, charging unit, bench stand and color coding pipette cones
500,000.00 500,000.00
16 1 unit JAW CRUSHER
- Designed to speed-up crushing of ore mineral and similar materials.
- Compact and rugged for laboratory and small production units.
- Manganese steel jaws adjustable up to 6mm opening - Supported with strong steel frame
Capacity 500 – 800 kg/hr
Feed Opening 100 x 125 mm
Final Material size 5 – 25mm
Dimensions 700 x 500 x 700 mm
Motor 220V, 60Hz, 3 phase
Includes: Installation of equipment and training for end user is required.
250,000.00 250,000.00
17 1 unit BALL MILL
- Designed for grinding metaliferrous ore
- Body made of stainless steel
- Grinds material at a specific speed by using a specific quantity of grinding media (steel balls) for a predetermined length of time.
- With rolling rings
Capacity 2kg
Motor 220V, 60Hz, 3 phase
- Includes grinding balls (chrome steel balls):
40mm Ø - 18 pieces 30mm Ø - 27 pieces 25mm Ø - 4 pieces 19mm Ø - 29 pieces 12.5mm Ø - 38 pieces
- Includes: Installation of equipment and training for end user is required.
185,000.00 185,000.00
18 1 unit TEMPERATURE CONTROLLER - A gun type temperature controller
Temperature control selection 0-1200 C
Amperage 11A
Height 10.7 in
Width 3.8 in
depth 11.3 in
60,000.00 60,000.00
19 1 set SIEVE SHAKER
- Accurately reproduce the circular and tapping motion of hand- sieving
- With a uniform, mechanical action to assure dependable and comparable test result
- totally enclosed, vertically-mounted motor
- available for use with either 8” or 12” diameter sieves.
Capacity 6 full height sieves, (203mm) Ø, plus pan and cover
Motor ¼ HP
Timer Built-in 30 minute timer Support Plate Adjustable
Dimensions 28” w x 21” d x 25” h (711 x 533 x 635 mm)
Weights CL-309: Net 165lbs (75kg); Shpg.
185lbs (84kg)
- Includes one (1) set standard testing sieve (max of seven sieves) of 8” diameter. Features:
- Unique fillet design ensures smooth and uninterrupted flow of material through sieving medium
- constructed using the finest quality mesh
- Certificate of conformity to ASTM standards supplied with every sieve
- All sieves are made of brass, solder sealed eliminating all crevices
Frames 8” (203mm)Ø; full height; 2” (51mm) depth to mesh
Brass Type Polished and lacquered brass with S.S. mesh on fine series and brass mesh on coarse S.S. type Stainless steel construction S.S. mesh Nameplates Show standard, alternate and Tyler screen
scale equivalent designations Weights 8” (203mm)Ø; net 1lb (453g)
Includes: Installation of equipment and training for end user is required.
250,000.00 250,000.00
20 1 unit BOTTLE ROLLER
- 3 Roll Counter top Roll Drive - Roll are rubber covered
Dimensions 2” Ø , 24” long
Number of rollers 3
Speed 50 – 60 rpm
Maximum power 220V, 50-60Hz
- Includes 6 pcs bottles
- Includes: Installation of equipment and training for end user is required.
280,000.00 280,000.00
21 1 unit ELECTROLYTIC CELL PLUS ACCESSORIES - Electro winning cell for gold recovery
- With electrolyte distribution manifold and adjustable O/F weir - Rich and lean electrolyte vessels
- Teflon coated immersion heaters with temperature controllers - Electrolyte feed and circulation pumps
- Rectifier with constant regulation of current voltage output
Capacity 25g Gold per hour
Cathodes 4
Anodes 5
Rectifier 0-25 amps, 1-5 volts
Includes: Installation of equipment and training for end user is required.
500,000.00 500,000.00
22 1 unit ELECTRIC FURNACE - Gold melting crucible furnace
- with automatic digital temperature controller
- PID controller
- can be electrically heated or diesel fired furnace
Inner chamber size 100 x 100 x 100 mm Standard working
temperature
1350 °C
Maximum working temperature
1400°C (< 3hrs)
Temperature control 30 steps programmable and PID automatic control Heating rate 0~40.C/min (suggestion:
=<10.C) Temperature accuracy ± 1°C
Heating element High quality SiC heater Working voltage AC 220V Single Phases 60/
50Hz
Maximum power 1kW
Outside size 380 x 450 x 600mm
Net weight 30kg
220,000.00 220,000.00
23 1 unit SHAKING TABLE
- designed to separates the ore by specific gravity
- includes built-in hydraulic jack lift and 20 mesh screen in feed trough
Production Rate 1500-2500 lbs/hr.
Water Requirements 5-12 GPM
Table Size 61” x 32”
Height 43”
Weight 386 lbs
Power ½ HP, 6°C, 110V @ 600Watts
Revolution 1725 rpm
Foundation 5’ x 3’ ; 4 (slabs)
- includes accessories for data logging and printing
- includes: installation of the equipment and training for the end user is required.
1,300,000.00 1,300,000.00
24 1 unit GOLD BALANCE
- capacity 2 grams, 1 microgram readability
Inclusive of Anti vibration table, software and laptop - detachable indicator
The possibility of detaching the indicator from the weighing chamber significantly limits shocks and vibrations that may influence weighing process.
- Infrared proximity sensors: Optical functions * PRINT function
* TARE function
* Sensor’s Sensitivity Adjustment
Data exchange through USB storage devices:
* Update balance software
* Export weighing data * Export/import databases * Export/import balance settings * Exchange data between balances
Maximum load 2gm.
Readability 1µg
Repeatability 2.1µg (to 2g)
2.5 µg (2g ÷ 5g)
Linearity ± 5µg
Eccentric load deviation 5µg Sensitivity offset 2 x 10-6 x Rt Sensitivity temperature drift 1 x106/°C x Rt Sensitivity stability 1 x 10-6/ a x Rt Minimum weight (USP) 6.3 mg Minimum weight (U= 1%,
K=2)
0.4 mg
Pan size Ø 26 mm
Weighing chamber dimensions
Ø 90 x 90mm
Stabilization time 5s
Calibration Automatic (internal)
650,000.00 650,000.00
Working temperature + 18°±30°C
Interface 2xUSB, RS 232, Ethernet,
2in/2out (digital)
Power Supply 110-230 V AC / 50-60Hz/13.5- 16V AC /1,1A
Display 5.7” touch screen
Includes: Installation of Equipment and training for end user is required.
Note: Bidders must specify the brand name in their offer “if applicable”
B. Secure Checklist of bidding documents from the BAC Secretariat Office after payment of the non- refundable bidder’s fee. Accomplish the duly certified requirements in three (3) copies, and submit the same at the BAC Secretariat Office on or before the deadline set.
C. Bid Related Schedules:
Activity Schedule Venue
Issuance of bid documents
January 7, 2013
BAC Sec OfficePre-bid conference
January 15, 2013; 2:00 PM
Legal OfficeSubmission of bid documents
January 29, 2013; 2:00PM
BAC Sec. Office Opening of bid documentsJanuary 29, 2013; 2:00 PM
Legal OfficeD. The MSU-IIT reserves the right to review the qualifications of a selected bidder, subject to technical and production criteria, reject any or all bids, waive any formality or defect therein and accept the offer considered most advantageous to MSU-IIT.
E. Bidders should have completed, within 2 years from the date of submission and receipt of bids, a contract similar to the Project, and equivalent to at least fifty percent (50%) of the ABC (For the procurement of Non-expendable Supplies), Or contract that is similar to this Project, equivalent to at least twenty-five percent (25%) of the ABC (For the procurement of Expendable Supplies).
F. The MSU-IIT reserves the right to accept or reject any Bid, to annul the bidding process, and to reject all Bids at any time prior to contract awards without thereby incurring any liability to the affected Bidder or Bidders.
G. For further clarifications, please inquire from Atty. Edgar Alan A. Donasco, Office of the BAC Secretariat, Telefax No. (063) 225-4926, anytime during office hours, or at our e-mail address:
Dr. David N. Almarez BAC Chairman
