• Tidak ada hasil yang ditemukan

isprs archives XLI B5 633 2016

N/A
N/A
Protected

Academic year: 2017

Membagikan "isprs archives XLI B5 633 2016"

Copied!
8
0
0

Teks penuh

Loading

Gambar

Figure 1. Workflow of as-built BIM modeled on Cultural  Heritage site (HBIM), from (Dore et al
Figure 2. Summary of algorithms for object recognition approaches on existing buildings, from (Volk et al
Figure 4. Photos from the ancient structure and image of the section elaboration and mesh creation
Figure 12. Creation of niche by subtraction solid.
+3

Referensi

Dokumen terkait

This paper proposes techniques to classify the object in the satellite image by using ROI automatic detection technique based on histogram segmentation.. The ROI

3.6.3 Semi-Global Dense Matching (SGM): The enhanced EOPs of each image are obtained from the bundle adjustment procedure using initial values acquired directly

A common way to evaluate these errors consist in positionning the sensor parallel to a wall at different known distances.. The M8 LIDAR system is intended to be use both indoor

This paper presents an algorithm for the automatic registration of terrestrial point clouds by match selection using an efficiently conditional sampling method --

The segmentation of the wood sculpture, the bolts and rivets, and the woodworm holes was performed with thresholding (Russ, 2002), but additional filters and corrections were

However, for the SXB experiments with weighted control points, whenever PM did a two-stage optimization and/or an orientation procedure was used, the results differed by up to half

KEY WORDS: Multi-scale Segmentation, Shape Criterion, Aspect Ratio, Automatic Parameterization, F-measure, Object-based Image

Also, we presented results on real point clouds acquired by a Velodyne multi-beam sensor: our optimization can be applied to any multi-beam LIDAR sensor configuration, as long as