Adam, M., dan Delsanti M. 1982. Viscosity of semi dilute polymer solutions.
Journal Physique, Vol.43 :549-557.
Al Khatib, M.A.M. 2006. The Development of Poiseuille flow of a Pseudoplastic fluid. The Arabian Journal for Science and Engineering, Vol.31 No.1A:
101-110.
Anonym. 1999. Methocel Cellulose Ethers as Suspending Agent for Suspension polymerization of Vinyl Chloride. Dow Chemical Company : USA.
Bao, Y.Z., Wei Z.L., Weng Z.X., dan Huang Z.M. 2003. Particle Morphology of Poly (Vinyl Chloride) resin prepared by suspended emulsion polymerization. Chinese Journal of Polymer Science, Vol.21, No.4:447-452.
Bhattacharya, A., dan Ray.P. 2003. Studies on Surface tension of Poly (Vinyl Alcohol) : Effect of concentration, temperature, and addition of Chaotropic Agents. Journal of Applied Polymer Science, Vol.93 : 122-130.
Bergenholtz, J., Brady J.F., dan Vicic M. 2002. The Non-Newtonian Rheology of dilute colloidal suspensions. Journal Fluid Mech, Vol.456: 239-275.
Bolgar, M., Hubball, J,. Groeger, J., dan Meronek S. 2008. Handbook for the chemical analysis of plastic and polymer additives. CRC Press. Taylor and Francis Group.
Bower, D. 2002. An Introduction to Polymer Physics. Cambridge University Press: New York.
Braun, D., Cherdron.H., Rehahn.H., Ritter.H., dan Voit.B. 2005. Polymer Synthesis and Practise. Fundamentals, Methods, Experiments. 4th Edition.
Springer Germany.
Brown, E., dan Jaeger H.M. 2009. Dynamic Jamming Point for Shear Thickening Suspensions. Physical Review Letters (PRL)103.
Brown, E., Forman N.A., Orellana C.S., Zhang H., Maynoe B.W., Betts D.E., De Simone J.M., dan Jaeger H.M. 2010. Generality of Shear Thickening in Dense Suspensions. Letters : Nature Materials.
Budianto, A. 2008. Metode Penentuan Koefisien Kekentalan Zat Cair dengan Menggunakan Regresi Linear Hukum Stokes, Seminar Nasional IV Sdm Teknologi Nuklir, Yogyakarta.
81 Budianto, E., Noverra M.N., dan Tresye. U. 2008. Pengaruh Teknik Polimerisasi Emulsi terhadap Ukuran Partikel kopoli(stirena/butil akrilat/metil metakrilat), Makara, Sains, Vol 12, No. 1: 15-22.
Cogswell, F.N. 1983. Influence of Acrylic Processing Aids on the Rheology and structure of Polyvinyl Chloride. Pure and applied Chemistry, Vol 55.
No. 1: 177-190.
Collins, E.A. 1977. The Rheology of PVC- An Overview. Pure and Applied Chemistry, Vol.49 : 581-595.
Cowd, M.A.1982. Kimia Polimer. ITB: Bandung.
Daan, V., Johan S., Guus E.F., Hans C.K., Jasco H., John W.G., dan Leonardus W.K. 2007. The compatibility of (natural) polyolswith heavy metal and zinc-free poly (vinyl chloride) : Their effect on rheology and implicants for plate out. Science direct, Polymer Degradation and Stability,Vol.93:
50-58.
Desnelli., dan Miksusanti. 2010. Studi Biodegaradsi Blend PVC-Minyak nabati epoksi sebagai salah satu upaya mengurangi pencemaran lingkungan oleh limbah plastik. Jurnal Penelitian Sains, Vol 13, No.2 : 13207.
Drelich, J., Payne T., Kim J.H., dan Miller J.D. 1998. Selective Froth Flotation Of PVC from PVC/ PET : Mictures for the Plastics Recycling Industry.
Polymer Engineering and Science, Vol.38 : No.9 : 1378-1386.
Driscoll, S.B, dan C.R Grolman. 1987. The Rheology of PVC. Journal of Vinyl Technology. Vol.9 No.2. The Departement of Plastic Engineering : Lowell Massachussets.
Fall, A., Lemaitre A., Bertrand F., Bonn D., dan Ovarlez G. 2010. Shear Thickening and migration in granular suspensions. Universite Paris Est.
Frrdous, A.J. 1992. Viscosity and Stability Studies of Hydroxypropyl Methylcellulose Polymer Solutions. Pakistan Journal of Pharmaceutical Sciences, Vol.5 : 115-119.
Gaines, G.L. 1969.Surface Tension of Polymers Solutions. Poly-isobutylenes in n-heptane and tetraline. Journal of polymer science, Vol.7: 1379-1383.
Grossman, R. 1998. Encyclopedia of PVC, Second Edition, revised and expended vol.4. Edited By Leonard I Nass. New York : Basel Marcel Dekker, Inc.
Hart, H., Leslie E., Craine D., dan J. Hart. 2003. Organic Chemistry Edisi ke-11.
Erlangga: Jakarta..
82 Honey, HC., dan Pretorius WA. 2000. Laminar flow pipe hydraulics of pseudoplastic- thixotropic sewage sludges. ISSN 0378-4738,Water SA Vol.26 No.1 :19-25.
Hosier, I. L., Alun S.V, Geoffrey R.M, Jintana S, dan Fred J. Davis. 2004.
Polymer Chemistry. Oxford University Press.
James, W.E. 1996. Encyclopedia of Chemical Technology Vinyl Polymers (PVC), fourth edition. The Geon Company: Ohio.
Jiang, B., Keffer, D.J., Edwards B.J., dan Allred J.N. 2003. Modeling Shear Thickening in dilute poler solutions: Temperature, concentration, and moleculer weight dependencies. Journal of Applied Polymer Science, Vol.90:2997-3011.
Khan, H.U., Gupta V.K., dan Bhargava G.S. 1988. A Satistical Approach for Studying the Effect of Suspending Agent on the Properties of Suspensions.
Journal Polymer Vol.5 : 193-200.
Kim, B.C., Kwang U.K., dan Sung I.H. 1986. Foam Extrusion of Rigid PVC : Effect of Decomposition Mode of Chemical Blowing Agent on the Foaming Characteistics and foam Properties. Polymer Society of Korea.
Vol.10, No.2. Departement of Textile Engineering. Seoul National University.
Koos, E. 2011. Capillary forces in suspension Rheology. American Association for the Advancement of Science,Vol.331: 897-900.
Koyanagi, S., Tajima S., Kurimoto K., Nakakubiki., Yoshitaka K., dan Takada.
1979. Method for Suspension- Polymerizing Vinyl Chloride. United States Patent, No.4,136,242.
Kozlowski, M., dan Bucknall C.B. 2001. Blends containing core-shell impact modifiers. Part 2 : Melt Rheology of rubber- toughened plastics (IUPAC Technical Report). Pure Applied Chemistry., Vol.73, No.6 : 913-926.
Maier, H.K. 1987. Method of Suspension Polymerization of Vinyl Chloride.
Martoni, D. 2008. Analisis Karakteristik Peluahan Sebagian pada Model Void Berdasarkan Fungsi Waktu dan Tegangan dalam Polyvinyl Chloride (pvc), Skripsi. Fakultas Teknik Universitas Diponegoro: Semarang.
83 Mazandarani, M.T., Elliasi A., dan Fazlollahnejad M. 2007. Experiment data and corellation of surface tension of binary polymer solutions at differant temperature and athmosperic pressure. Europian Congress of chemical Engineering : Copenhagen.
Mitsoulis, E. 2007. Annular Extrudate swell of pseudoplastic and viscoplastic fluids. Journal Non-Newtonian fluid Mech, Vol.141: 138-147.
Moto. K., V. Julian., Syamsudin T. A., Wiradi., dan S. R. Wijaya. 2004.
Pembuatan Polimer Lateks Emulsi untuk Peningkatan CBR Tanah Sub-grade pada Konstruksi Jalan, Makara, Teknologi, vol. 8, no. 2: 55-60.
Mousa, A. 2004. Studies on Rheological behaviour of Thermoplastic Elastomer derived from PVC and NBR using Torque Rheometry. Iranian Polymer Journal, Vol.13, No.6 : 455-461.
Nakajima, N., dan Kwak S.Y. 1991. Effect of Plasticizer type on Gelatin and Fusion of PVC Plastisol, Dialkyl Phthalate series. Journal of Vinyl Technology. Vol 13, No.4:212-222.
Negi, A.S., dan Osuji C.O. 2008. New Insight on fumed colloidal Rheology-Shear Thickening and vorticityaligned structures in flloculating dispersion.
Rheologica Acta manuscript. Yale University : New Haven.
Nichetti, D., dan Zloczower I.M. 1998. Viscosity model for polydisperse polymers melts. Journal of Rheology, Vol.4:951-969.
Nurmansyah, A.R. 2008. Pelapisan berwarna pada permukaan papan partikel dengan polimer uretan akrilat menggunakan radiasi sinar UV. Skripsi.
Universitas Islam Negeri Syarif Hidayatullah: Jakarta.
Olaru, R.N., D.M.Vuluga., F.Georgescu., D.Marinescu., M.Dimone. 2010.
Microstructure of partially hydrolyzed Polyvinyl Alcohols used in PVC-S technology. ISSN 1454-2331 series B,Vol.72 :77-84.
Oldrop, K. 2007. What Happens when Rheological properties change? Looking into Rheological properties with simultaneous collection of microscope. Annual Transactions of the nurdic Rheology society Vol.15.
Paiva, A., Petronetto F., Lewiner T., dan Tavares G. 2006. Particle based Non-Newtonian fluid animations for melting objects. Proceedings of the Sibgrapi, pp 78-85. Rio de Janeiro: Brazil.
Puyvelde, P.V., Velankar S., Moldenaers P. 2001. Rheology and morphology of compatibilized polymer blends. Current Opinion in Colloid and Interface Science.
84 Ramirez, J.G. 2004. Chararterization of Shear Thickening fluid-filled foam system for use in energy absosption devices. Massachusetts Institute of Technology.
Rasteiro, M.G., Tomas A., Ferreira L., dan Figueiredo S. 2009. PVC paste Rheology : Study of process dependencies. Journal of Applied Polymer Science, Vol 112 : 2809-2821.
Ray, S.S. 2006. Rheology of Polymer/Layered Silicate Nanocomposites, J. Ind.
Eng. Chem., Vol. 12, No. 6.
Riswiyanto. 2009. Kimia Organik. Erlangga: Jakarta.
Roe, R.J. 1966. Hole Theory of surface tension of polymer liquids.
Eectrochemicals Departement of Du Pont Inc.
Rohaeti, E. 2009. Karakterisasi Biodegradasi Polimer. Prosiding Seminar Nasional Penelitian, Pendidikan dan Penerapan MIPA. Fakultas MIPA.
UNY.
Saeki, Y, dan Emura T. 2001. Technical Progresses for PVC production.
Progresses Polymer Science, Vol. 27: 2055-2131.
Sayhan, I. 2010. Use of Fly Ash as an alternative filler material in PVC-Plastisols.
Thesis. Izmir Institute of Technology.
Schramn, G. 2000. A Practical approach to Rheology and Rheometry. 2nd Edition.
Karlsruhe: Germany.
Shenoy, A.V. 1999. Rheology of Filled Polymer Systems. Kluwer Academic Publishers: London.
Sieglaff, C.L. 1981. The Morphology, Rheology and Processing Properties if Polyvinyl Chloride. Pure and Applied Chemistry, Vol.53: 509-520.
Sombatsompop, N., dan Phromchirasuk C. 2003. Effect of Acrylic-Based Processing Aids on Processibility, Rheology, Thermal and structural stability, and Mechanical properties of PVC/ Wood-sawdust composites.
Journal of Applied Polymer Science, Vol.92 : 782-790.
Sombatsompop, N., dan Thongsang H. 2001. Rheology, Morphology, and Mechanical and Thermal Properties of Recycled PVC Pipes. Journal of Applied Polymer Science, Vol.82 : 2478-2486.
Steffe, J.F. 1996. Rheological Metods in Food Process Engineering. Second Edition. Michigan State University :USA.
Sukardjo. 2002. Kimia Fisika. Rineka Cipta : Jakarta.
85 Suminar. 2003. Prinsip- prinsip Kimia Modern Edisi ke-4. Erlangga: Jakata.
Takada, S., Yuki K., Maruyama H., Tanaka T., dan Igarashi K. 1994. Process For Suspension Polymerization of Vinyl Compound. United States Patent, No 5,349,008.
Tomas, A., Rasteiro, M.G., Ferreira, L., dan Figueiredo,S. 2007. PVC paste Rheology: Polymer properties and viscoelastic behaviour. Chemical Engineering Departement, Coimbra University: Portugal.
Torre, J.P. 2007. Quenching Runaway Reactions: Hydrodinamics and jet Injection studies for agitated reactors with a deformed free surface. Thesis. The University of Sydney.
Tuminello, W.H. 1999. Determining molecular weight distributions from the rheological properties of polymer melts.The Du Pon Company.
Vassilios, A., Kelessidis., dan Hatziztamou V. 2011. Preparation Methodology and Rheological Properties of yield pseudoplastic transparent fluids.
Journal of Dispersion Science and Technology.Vol.32:1-9. ISSN 0193-2691.
Wagner, H.L.1985. The Mark-Houwing-Sakarada Equation for the viscosity of linear Polyethylene. Journal Physic Chemistry, Vol.14 No.2.
Wilkes, C.E., Daniels C.A., dan Summers J.W. 2005. PVC Handbook. ISBN 3-446-22714-8.
Winter, H.H. 2008. Rheometry with Capillary Rheometers. University of Massachusetts. USA.
Xie, T.Y., A.E. Hamiclec, P.E. Wood., D.R Woods. 1991. Suspension, Bulk, and Emulsion polymerization of Vinyl Chloride- Mechanism, kinetics, and reactor modelling. Journal of Vinyl Technology., Vol 13, No.1.
Zadhoush, A., Alsharif M.A., Abed M.R., dan Haghighat M. 2007. Temperature dependent Rheological behaviour of plastisols used in coated fabrics.
Iranian Polymer Journal,Vol.16, No.11: 753-758.
Zhang, H., dan Cooper A.I. 2002. Synthesis of Monodisperse Emulsion Templeted Polymer Beads by Oil in Water in Oil (O/W/O) Sedimentation Polymerization. American Chemical Society-Chem Mater, Vol.14 : 4017-4020.
86
LAMPIRAN- LAMPIRAN
Lampiran 1. Nilai koreksi faktor Viskositas Capillar
Flow time Tube Capillary (No.100) 50 Nilai baku Viskositas pada t1 = 0,01675 mm2/s (centi stoke/cSt) Viskositas pada t2 = 0,01302 mm2/s (centi stoke/cSt) Perhitungan :
V = K (t- Ø )
Ø = koreksi factor untuk capillary No. 100 Misal t1 = 74 sec
Maka dicari koreksi factor antara 70-80 70 = 0,12
87 Lampiran 2. Instrumen utama yang digunakan
Viskometer Brookfield Viskometer Capillary
Surface Tension Meter Labo Stirer Promix PR-600
88 Microwatcher
89 Rheoscope Haake Mars
90 Lampiran 3. Bahan-bahan dan Larutan Suspending Agent yang digunakan
Serbuk PVC
Sampel larutan Suspending Agent
91 Larutan Campuran SA-B : SA-E dan SA-B : SA-F
Heptana