Effect Of Welding Current On Mechanical Properties Of Galvanized Chromided Steel Sheet In Resistance Spot Welding.
Bebas
24
0
0
Teks penuh
Dokumen terkait
As stated earlier, in resistance spot welding heat generated through the electric resistance offered at the joint to a high current and sufficient pressure is
Allain et al (S.Allain, 2004), a number of techniques including high pressure torsion, equal channel angular pressing, and cyclic extrusion compression have been developed
The America Iron and Steel Institute(AISI) has defined steel as:” Steel is considered as carbon steel when there is no minimum content is required for chromium, cobalt,
This project were pointed on investigating on spot welding strength effect in getting the optimize parameters as the one part to improve the parameters selection to get the
The joint stiffness was the controlling factor of the fatigue strength of resistance spot-welded unequal sheet thickness austenitic stainless steel.. Keywords: resistance
Kajian dan pengamatan hasil proses GTAW bahan aluminium yang berbeda dalam hal ini daerah lasan akan dilakukan uji kekerasan dan uji kekuatan tarik guna melihat sejauh
Table 3: Welding parameter Parameter Value Current Pressure Weld time 1.5kA 3 bar 32 cycle The nugget size and mechanical properties such as tensile strength, hardness and
This study aimed to determine the effect of the kind of filler metal ER5356 filler metal and welding current 140 amperes, 160 amperes, and 180 amperes on the mechanical properties and
