• Tidak ada hasil yang ditemukan

High Impedance Fault Detection on Power Distribution Feeder.

N/A
N/A
Protected

Academic year: 2017

Membagikan "High Impedance Fault Detection on Power Distribution Feeder."

Copied!
8
0
0

Teks penuh

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)

Referensi

Dokumen terkait

Bahari, Open and short circuit switches fault detection of voltage source inverter

The power quality signals were also tested using Gabor transform and it also evaluated with OSWS , HWS and OWS window.The signal transient is generate similar to

Indeks Keandalan Sistem Distribusi SAIFI, SAIDI, dan CAIDI Sebelum Penggunaan SCADA Tahun 2013 SAIDI SAIFI CAIDI 6,21 jam/tahun 2,77 kali/tahun 2,242 jam/tahun Sedangkan untuk

Single Line Diagram Kijang Feeder with ETAP • Kancil Feeder Power Losses NA2XSEYBY 240 mm2 1506 W AAAC 150 mm2 16222 W AAACS 150 mm2 29136 W Total Power Losses on Kancil

Considering that faults must be quickly and accurately located, this research proposes using a J48 decision tree algorithm to locate the area and the fault occurrence zone, based on

When a fault occurs at some point in the network, normal operating conditions are upset; if the fault is persistent severe loss of load, property damage and steep economic losses can

Fig.1 Simulated power transformer system Fig.2 DWT of b-phase differential inrush current for turn to turn fault between turns 294 and 343 in primary winding Fig.3 DWT of b-phase

Besides, in sum, the power distribution to the States Government is the strongest one since the Ministry of Human Resource Development puts more attention to the possibility of when the