Eco design study of aluminium alloy 5052-H32 and aluminium alloy 6061 for recreational airboat.
Teks penuh
Gambar
Dokumen terkait
This project is focused on the micromechanical modeling of aluminium magnesium alloy during plastic deformation using finite element analysis.. Grain size of aluminium matrix and
Pure aluminum is too soft for most mechanical applications and some of industrial applications need the aluminum that has more strength and better
In this project, the parameter of punch speed is using to investigate the springback characteristic by bending process in order to reduce the spring back amount. Other than
The comfort aspect in this project is based on 6 important parameters of ergonomic workstation, which is the size of chair and table, the height of table and chair,
The purpose of this project is actually to design and develop a product which is related to the emerged stamp to make the process of stamping the examination slips
Abstract The objectives of this study are: 1 To evaluate the recreational value of Lumpinee Park by the individual travel cost method.. 2 To estimate entrance fee for Lumpinee Park by
These economic values of silica sand tailings can be increased if they are made into nano-silica material by grinding using a crusher and ball mill, to reduce the size to 200 mesh or 74
Therefore, the purpose of this research is to analyze the impact strength properties of similar joint welding results on aluminum alloys which are widely used in the vehicle