• Tidak ada hasil yang ditemukan

A Case Study Of Rapid Prototyping Technologies.

N/A
N/A
Protected

Academic year: 2017

Membagikan "A Case Study Of Rapid Prototyping Technologies."

Copied!
24
0
0

Teks penuh

(1)
(2)
(3)
(4)
(5)
(6)

v

ABSTRACT

This report covers the final year project undertaken by the student in Universiti Teknikal Malaysia Melaka (UTeM). This report describe about a project titled "A Case Study Of Rapid Prototyping Technologies". The purpose of this project is to compare and evaluate the two types of rapid prototyping technologies machines which are Fused Deposition Modeling (FDM) Prodigy Plus and Three Dimensional Printing (3D Printer) Zcorp. The two types of rapid prototyping machines will be compare and evaluate in terms of dimensional accuracy, build time process and surface finish. This report is divided into six ( 6) chapters. The first (1) chapter presents the introduction of the project. The second (2) chapter presents the literature review on the rapid prototyping technologies. The third (3) chapter describe the methodology on how this project will be done. In fourth (4) chapter is the experimental work on how the experimental being done to come out the results. Next is chapter five ( 5), this chapter is where the result had been carry out and the discssusion of the result. The last chapter is chapter six (6) which contain the conclusion ofthis project.

(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)

Referensi

Dokumen terkait

[r]

1) Insomnia, adalah kesukaran dalam memulai atau mempertahankan tidur. 2)Hipersomnia, adalah jumlah jam tidur yang berlebihan dan mengantuk(somnolen) yang berlebihan di

Environment Analysis and Spatial Modeling Laboratory Department of Forest Resources Conservation Faculty of Forestry,

Tujuan penelitian adalah mengetahui hubungan antara tingkat depresi dengan kualitas hidup pada pasien Diabetes Melitus tipe II di Rumah Sakit Islam Surakarta.

Penelitian ini bertujuan untuk mengetahui perbedaan pola tempat duduk “U” dan Lingkaran dengan penerapan strategi Instant Assesment terhadap hasil belajar biologi

Tujuan: Untuk mengetahui manfaat infra red terhadap pengurangan nyeri dan oedema pada knee pada kasus post fracture patella dextra.,Untuk mengetahui manfaat terapi

Jumlah tepung torbangun yang digunakan dalam pengembangan produk tersebut setara dengan jumlah daun torbangun segar yang umum dikonsumsi oleh ibu-ibu dari masyarakat suku

Orang yang menyamarkan kentutnya dengan cara kentut sambil tertawa.  Orang