Design And Fabricate Vise Using CAD-CAM System.
Bebas
24
0
0
Teks penuh
Dokumen terkait
The purpose of this project was to design and fabricate an optimized disc brake rotor for UTeM personal electric vehicle.. There are several properties of the disc brake rotor must
Generally, there are three categories that the AC motor suitable for the use in electric vehicle: induction motors, synchronous motors and switched (or variable)
[r]
device and able to generate some power of electricity like a power plant.
The feature recognition system can be developed to identify the manufacturing data either direct from CAD system or from neutral file format such as STEP (Standard
4) TO AN ELEMEN : pergerakan pahat potong (menyayat) berdasarkan garis pada gambar benda kerja ( element ) yang dikehendaki (hanya satu elemen garis). Pergerakan dipandu
Setelah tampilan program keluar seperti diatas, untuk mengecek kebenaran seting PSO, tambah satu baris program persiapan penyayatan untuk mengecek koordinat pergerakan
, 2mm right Table S2: The other Patient information in CAD/CAM group The patient information of CAD/CAM group was showed about facial type diagnosis and simulating reposition
