53 DAFTAR PUSTAKA
Agunsoye, J.O., dan Aigbodion, V.S., 2013. Bagasse Filled Recycled Polyethylene Bio-Composites : Morphological And Mechanical Properties Study, Results And Physic, 3(1): 187-194.
Andriyanti, R., Suyanti, dan Ngasifudin., 2012. Pembuatan dan Karakterisasi Polimer Superabsorben dari Ampas Tebu, Prosiding Pertemuan dan Presentasi Ilmiah Teknologi Akselerator dan Aplikasinya, 13(1): 1-7.
Anusavice, K.J. 2004, Phillips: Buku Ajar Ilmu Bahan Kedokteran Gigi. Edisi: 10. Jakarta: EGC. 40-43, 51, 227-232, 237-243.
Arhun, N., Celik, C., dan Yamanel, K., 2010. Clinical Evaluation Of Resin-Based Composites In Postreior Restorations: Two-Year Results, Operative Dentistry, 35(4): 397-404.
Bernardinelli, O.D., Lima, M.A., Rezende, C.A., Polikarpov, I., dan Deazevedo, E.R. 2015. Quantitative 13C MultiCP Solid-State NMR As A Tool For Evaluation Of Cellulose Crystallinity Index Measured Directly Inside Sugarcane Biomass, Biotechnol Biofuels, 8(1): 1-11.
Christy, C.F., Tensing, D., dan Shanti, R.M., 2013. Experimental Study On Axial Compressive Strength And Elastic Modulus Of The Clay And Fly Ash Brick Masonry, J Civ. Eng. Constr. Technol., 4(4): 134-141.
Hambire, U.V., dan Tripathi, V.K., 2012. Experimental Evaluation Of Different Fillers In Dental Composites In Terms Of Mechanical Properties, ARPN J of Eng. Appl. Sci., 7(2): 147-151.
Hamouda, I.M., dan Elkader, H.A., 2012. Evaluation The Mechanical Properties Of Nanofilled Composite Resin Restorative Material, Journal Of Biomaterials And Nanobiotechnology, 3: 238-242.
Hegde, M.N., Hegde, P., Bhandary, S., dan Deepika, K., 2011. An Evaluation Of Compressive Strength Of Newer Nanocomposite : An in vitro Study, J of Conserv. Dent., 12(1): 36-39.
Hermiati, E., Mangunwidjaja, D., Sunarti, T.C., Suparno, O., dan Prasetya, B., 2010. Pemanfaatan Biomassa Lignoselulosa Ampas Tebu Untuk Produksi B ioetanol, Jurnal Litbang Pertanian, 29(4): 121-130.
54 ISO 10477., 2004. Dentistry-Polymer-Base Crown And Bridge Material 2nd ed.
International Organization for Standarization, Geneva, Zwitzerland. Jayanthi, N., dan Vinod, V., 2013. Comparative Evaluation Of Compressive
Strength And Flexural Strength Of Conventional Core Materials With Nanohybrid Composite Resin Core Material An In Vitro Study, J Indian Prosthodont Soc, 13(3): 281-289.
Karbhari, V.M., Strassler, H., 2007. Effect Of Fiber Architecture On Flexural Characteristic And Fracture Of Fiber-Reinforced Dental Composite, Dent Mater, 23(8): 960-968.
Maiwita, F., Darvina, Y., dan Yulkifli. 2014. Pengaruh Variasi Komposisi Ampas Tebu Dan Serbuk Gergaji Pada Papan Partikel Terhadap Konduktivitas Termal, PILLAR PHYSICS, 1(1): 41-48.
McCabe, J.F., dan Walls, A.W.G. 2014. Bahan Kedokteran Gigi (Applied Dental Materials). Edisi: 9. Jakarta: EGC.
Mitra, S.B., Wu, D., dan Holmes, B.N., 2003, An Application Nanotechnology In Advanced Dental Materials, J Am Dent Assoc, 134(1): 1382-1390. Mozartha, M., Herda, E., dan Soufyan, A., 2010. Pemilihan Resin Komposit Dan
Fiber Untuk Meningkatkan Kekuatan Fleksural Fiber Reinforced Composite (FRC), Jurnal PDGI, 59(1): 29-34.
Mulyatno, I.P., dan Jokosisworo, S., 2008. Analisa Teknis Penggunaan Serat Kulit Rotan Sebagai Penguat Pada Komposit Polimer Dengan Matriks Polyester Yukalac 157 Ditinjau Dari Kekuatan Tarik Dan Kekuatan Tekuk, Kapal, 5(3): 173-180.
Murthy, H.B.M., Shaik, S., Sachdeva, H., Khare, S., Haralur, S.B., dan Roopa, K.T., 2015. Effect Of Reinforcement Using Stainless Steel Mesh, Glass Fibers, And Polyethylene on the Impact Strength of Heat Cure Denture Base Resin-An In Vitro Study, Journal of International Oral Health, 7(6): 71-79.
Natarajan, P., dan C. Thulasingam, 2013. The Effect Of Glass And Polyethylene Fiber Reinforcement on Flexural Strength of Provisional Restorativeresin: An In Vitro Study, J Indian Prosthodont Soc, 13(4): 421-427.
Oladele, I.O., 2014. Effect Of Bagasse Fibre Reinforcement On The Mechanical Properties Of Polyester Composites, The Journal Of The Association Of Professional Engineers Of Trinidad And Tobago, 42(1): 12-15.
55 Purnawan, C., Hilmiyana, D., Wantini., dan Fatmawati, E., 2012. Pemanfaatan
Limbah Ampas Tebu Untuk Pembuatan Kertas Dekorasi Dengan Metode Organosolv, Jurnal EKOSAINS, 4(2): 1-6.
Power, J.M., dan Wataha, J.C., 2008. Dental Materials Properties and Manipulation. Ninth Edition. India: Elsevier.
Rahmad, D., 2012. Karakteristik Morfologi Pertumbuhan Beberapa Varietas Tebu, Jurnal Ilmiah Budidaya Dan Pengelolaan Tanaman Perkebunan Agroplantae, 1(2): 126-131.
Rahman, M.B.N., dan Kamiel, B.P. 2011. Pengaruh Fraksi Volume Serat Terhadap Sifat -Sifat Tarik Komposit Diperkuat Unidirectional Serat Tebu Dengan Matrik Poliester, Jurnal Ilmiah Semesta Teknika, 14(2): 133 -138. Rokhman, H., Taryono, dan Supriyanta, 2014. Jumlah Anakan dan Rendemen
Enam Klon Tebu (Saccharum officinarum L.) Asal Bibit Bagal, Mata Ruas Tunggal, Dan Mata Tunas Tunggal, Vegetalika, 3(3): 89-96
Rosa, R.S., Balbinot, C.E.A., Blando, E., Mota, E.G., Oshima, H.M.S., Hirakata, L., Pires, L.A.G., dan Hubler, R., 2012. Evaluation Of Mechanical Properties On Three Nanofilled Composites, Stomatologija, Baltic Dental And Maxillofacial Journal, 14(4): 126-130.
Sakaguchi, R.L., dan Powers, J.M., 2012. Craig’s Restorative Dental Materials. Thirtheenth Edition. USA: Elsevier Mosby.
Shabiri, A.N., Ritonga, R.S., Ginting, M.H.S., 2014. Pengaruh Rasio Epoksi/Ampas Tebu Dan Perlakuan Alkali Pada Ampas Tebu Terhadap Kekuatan Bentur Komposit Partikel Epoksi Berpengisi Serat Ampas Tebu, Jurnal Teknik Kimia USU, 3(3): 28-31.
Sonwane, S.R., dan Hambire, U.V., 2015. Comparison Of Flexural & Compressive Strength Of Nano Hybrid Composites, International Journal Of Engineering Trends And Applications, 12(2): 47-52.
Strassler, H.E., 2008. Clinical Material Review : Fiber-Reinforcing Materials for Dental Resins, Inside Dentistry.
Tewari, M., Singh, V.K., Gope, P.C., Chaudhary, A.K., 2012. Evaluation Of Mechanical Properties Of Bagasse-Glass Fiber Reinforced Composite, J. Mater. Environ. Sci., 3(1): 171-184.
Verma, D., Gope, P.C., Maheshwari, M.K., dan Sharma, R.K., 2012. Bagasse Fiber Composites-A Review, J. Mater. Environ. Sci., 3(6): 1079-1092 Wang, L., Alpino, P.H.P., Lopes, L.G., dan Pereira, J.C., 2003. Mechanical
56 Widyapramana, Widjijono, dan Sunarintyas, S., 2013. Pengaruh Kombinasi Posisi Fiber Terhadap Kekuatan Fleksural Dan Ketangguhan Retak Fiber Reinforced Composite Polyethylene, IDJ, 2(2): 1-8.
