Optimization Of Water Tank Superstructures For Fire Fighting Vehicles.
Bebas
24
0
0
Teks penuh
Dokumen terkait
even came to a conclusion that the designed Tank Model had failed after learning that the sought parameters could give preferable satisfactions, and then insisted to
In this thesis shows, continues research of designing new generation of Fire Fighting ground vehicle (FiGOV) by applying modular design approach.. FiGOV is an unmanned ground
In this project, design, development and performance of a wirelessly controlled Fire Fighting Ground Vehicle (FIGOV) is described.. FIGOV is a wireless control mobile machine that
The fire fighting machine is mounted with a hydraulic control arm with a nozzle which is connected to the water supply. The main function of this fire fighting machine
The main objective of a hydraulic system designer is to find a specific solution to a position, power, sequence or speed problem of any mechanical such as a
brief on fire fighting vehicles and highlight on frame design and problem statement. Since the main item is frame, chapter 2 covers the history, types of chassis, theory of.
[r]
Introduction Previously Fire Fighting Robots were controlled by using different electronics devices But this reduces the scope of control of fire fighting robot .However ,with the
