Ahmadzadeh, A, Neshati, A, Mousavi, A, Epackchi, S, Dabaghi, TF, Sarbazi, AH,’A comparison between shear bond strength of VMK master porcelain with three base-metal alloys (Ni-Cr-T3, verabond, super cast) and one noble alloy (X-33) in metal-ceramic restorations’, J Dent Shiraz Univ med Sci, vol. 14, no. 4, pp. 191-196.
Al Amri, MD, Hammad, IA 2012, ’Shear bond strength of two forms of opaque porcelain to the metal substructure’, King Saud University Journal of Dental Sciences, vol. 3, pp. 41-8.
Ali, RT, Ismail, K, Serdar P, Meral, AM, Mehmet, D 2013, ‘The effect of repeated porcelain firings on corrosion resistance of different dental alloys’, The Journal of
Advanced prosthodontics, vol. 5, pp. 44-50.
Barclay, CW, Walmsley, AD 2001, Fixed and Removable Prosthodontics, Churchill Livingstone, London, pp. 115.
Bae, EJ, Kim, JH, Kim, WC, Kim, HY 2014, ‘Bond and fracture strength of metal-ceramic restorations formed by selective laser sintering’, The Journal of Advanced prosthodontics, vol. 6, pp. 266-71.
Cheung, KC, Darvell, BW 2002,‘Sintering of dental porcelain: Effect of time and temperature on appearance and porosity’,Dental Materials,vol. 18, pp. 163-173.
Darvell, BW 2000, Dental materials sciences, 6th edn, Elsevier, Hongkong, pp. 470-87. DenryI, and Holloway JA. Ceramic for dental applications: A review. Materials 2010 (3): 351-368.
Enghardt, S, Richter, G, Richter, E, Reitemeier, B, Walter, MH 2015, ‘Experimental investigations on the influence of adhesive oxides on the metal-ceramic bond’, Metals, vol. 5, pp. 119-30.
Fraunhofer, JA 2010, Dental materials at a glance,Wiley-Blackwell, England, pp. 22, 38-45.
Giannarachis, C, Marmandiu, C, Vasilescu, VG, Vasilescu, E, Patrascu, I 2013, ‘Studies on the importance of metal-ceramic bond in merging ceramic mass on metal component’,
Fascicula, vol. 17, no. 2, pp. 5-12.
Gupta, KL, Nagpal, N 2011, ‘Evaluation of the bond strength of porcelain to non precious metal copings under different firing atmospheres’, Indian Journal of Dental Sciences, vol. 3, no. 2, pp. 1-3.
Ghanbarzadeh, J, Sabooni, MR, Tehrani NA 2008,‘The influence of repeated firing on color stability of two porcelain types’, J Med Sci,vol. 8, no. 1, pp. 77-80.
Giordano R, and Mclaren EA. Ceramics overview: Classification by microstructure and
processing methods. Compedium. 2010;31(9):682-697.
Hadi, A, Massoumi, F, Mossaei, A 2016, ‘Effect of opaque porcelain thickness on bond strength of porcelain to Ni-Cr alloys’, Journal of Dental School, vol. 34, no. 2, pp. 72-81. Henriques, BAPC 2012, ‘Bond strength enhancement of metal-ceramic dental restoration by FGM design’, PhD thesis, Universidade do Minho escola de Engenharia.
Hatrick, CD, Eakle WS, Bird WF 2011, Dental Materials: clinical applications for dental assistants and dental hygienists, 2nd edn, Elsevier, St. Louis, Missouri, hal. 100-2, 125-6. Hammad, IA, Talic, YF 1996, ’Design of bond strength tests for metal-ceramic complexes: review of the literature’, The Journal of Prosthetic Dentistry, vol. 75, no. 6, pp. 602-8. Hong, JT, Shin, SY 2014, ‘A comparative study on the bond strength of porcelain to the millingable Pd-Ag alloy’, The Journal of Advanced prosthodontics, vol. 6, pp. 372-8
Jalali, H, Bahrani, Z 2015, ‘A comparison review of reliability of multiple firing techniques on the microtensile bond strength in lithium disilicate bases ceramics: A review study’,
Bulletin of Environment, Pharmacology and Life Sciences, vol. 4, no. 7, pp. 192-6.
Jassim, HH 2013, ‘Evaluation of the shear bond strengths between two alternative metal alloys and porcelain, MDJ, vol. 10, no. 2, pp. 161-6.
Joias, RM, Tango, RN, Araujo, JEJ, Araujo, MAJ, Saavedra, GSFA, Junior, TJAP, Kimpara, ET 2008, ‘Shear bond strength of a ceramic to Co-Cr alloys’, The Journal of Prosthetic Dentistry, vol. 99, no. 1, pp. 54-9.
Kelly, JR, and Benetti, P. Ceramic materials in dentistry: historical evolution and current
practice.Aust. Dent. Journal 2011; 56;(1):84-96.
Lopes, SC, Pagnano, VO, Rollo, JMDA, Leal, MB, Bezzon, OL 2009, ‘Correlation between metal-ceramic bond strength and coefficient of linear thermal expansion difference, Journal of Applied Oral Science, vol. 17, no. 2, pp. 122-8.
Mrazova, M, Klouzkova, A 2009, ‘Leucite porcelain fused to metals for dental restoration’, Ceramics-Silikaty, vol. 53, no. 3, pp. 225-30.
Marquez, JM, Rincon, JM, Romero, M. Effect of firing temperature on sintering of
porcelain stoneware tiles. Ceramics Int 2008;34:1867-1873.
Maan, RZ, Haidar, HJ 2003, ‘Evaluation of the effects of porcelain firing cycles on the marginal fit changes of porcelain-fused-to-metal crowns constructed utilizing two different marginal designs and alloys’, Al-Rafidain Dent J, vol. 3, no. 1, pp. 13-20.
Mutawa, NJ, Sato, T, Shiozawa, I, Hasegawa, S, Miura, H 2000, ‘A study of the bond strength and color of ultralow-fusing porcelain’, The International Journal of Prosthodontics, vol. 13, no. 2, pp. 159-64.
Neto, AJF, Panzeri, H, Neves, FD, Prado, RA, Mendonca, G 2006, ‘Bond strength of three dental porcelains to Ni-Cr and Co-Cr-Ti alloys’, Brazilian Dental Journal, vol. 17, no. 1, pp. 24-8.
Olivieri, KAN, Neisser, MP, Bottino, MA, Miranda, ME 2005, ‘Bond characteristics of porcelain fused to cast and milled titanium’, Braz J Oral sci, vol. 4, no. 15, pp. 923-8. O’Brien, WJ 2002,Text Book of Dental material and their selection,3rdedn, Quint. Publish. Co, Inc, USA, pp. 44-68, 345-381.
Prakash, MP, Kumar CM, Viswambaran CM 2012, ‘Effect of firing cycle and surface finishing on the sag resistance of long-span metal ceramic framework using base metal alloys-an in vitro study’, MJAFI, vol. 68, no. 2, pp. 145-50.
Powers, JM, Sakaguchi, RL 2009,Craig’s restorative dental materials, 12th edn, Elsevier, St. Louis, Missouri.
Pagnano, VO, Esquivel, MC, Leal, MB, Felipucci, DNB, Bezzon, OL 2009, ‘Effect of casting atmosphere on the shear bond strength of a ceramic to Ni-Cr and Ni-Cr-Be alloys’,
Powers, JM, Wataha, JC 2008, Dental Materials: Properties and Manipulation, 9 edn, Elsevier, St. Louis, Missouri.
Prado, RA, Panzeri, H, Neto, AJF, Neves FD, Silva, MR, Mendonca, G 2005, ‘Shear bond strength of dental porcelains to nickel-chromium alloys’, Brazilian Dental Journal, vol. 16, no. 3, pp. 202-6.
Piskin, B, Sipahi, C, Ayyildiz, S, Gunay, Y 2014, ‘Assessment of thicknesses and color properties of opaque porcelain layers applied by different dental technicians’, Gulhane Tip Derg, vol. 56, pp. 199-205.
Prabhu, LS, Achyutha BT, Manjappa, S 2003, ‘Effect of oxidation and porcelain firing temperatures on tensile bond strength of porcelain to Ni-Cr-Mo base metal surfaces in dentistry’, proceedings of the International Conference on Mechanical Engineering, Bangladesh, pp.1-4.
Qiu, J, Yu, WQ, Zhang, FQ, Smales, RJ, Zhang, YL, Lu, CH 2011, ‘Corrosion behavior and surface analysis of a Co-Cr and two Ni-Cr dental alloys before and after simulated porcelain firing’, Eur J Oral Sci,vol. 119, pp. 93-101.
Rayyan, MM 2014, ‘Effect of multiple firing cycles on the shear bond strength and failure mode between veneering ceramic and zirconia cores’, Egyptian Dental Journal, vol. 60, no. 3, pp. 3325-33.
Ren, XW, Zeng, L, Wei, ZM, Xin, XZ, Wei, B 2016, ‘Effects of multiple firings on metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting’,Journal of prosthetic dentistry, vol. 115, pp. 109-114.
Rokni, SR, Baradaran, H 2007, ‘The effect of oxide layer thickness on bond strength of porcelain to Ni-Cr alloy’, Journal of Mashhad Dental School, no. 31, pp. 17-21.
Rathi S, Parkash H, Chittaranjan B, and BhargavaA. Oxidation heat treatment affecting
metal-ceramic bonding.J Indian Den. Res. 2011;22(6).
Rosenstiel, Land, Fujimoto 2004, Text book of Contemporary Fixed Prosthodontics, 4thedn, pp. 418-430, 488-642.
Saini, M, Singh, Y, Tripathi, A, Singh, SV, Basu, B, Chandra, S 2011, ‘Effect of firing temperatures on interface of porcelain fused to metal restorations: An in vitro study’,Indian J Stomatol, vol. 2, no. 4, pp. 222-6.
Schweitzer, DM, Goldstein, GR, Ricci, JL, Silva, NRFA, Hittelman, EL 2005, ‘Comparison of bond strength of a pressed ceramic fused to metal versus feldspathic porcelain fused to metal’, Journal of Prosthodontics, vol. 14, no. 4, pp. 239-47.
Sayed, NM 2015, ‘Shear bond strength and failure mode between veneering ceramic and metal cores after multiple firing cycles’, Egyptian Dental Journal, vol. 61, pp. 659-66. Salazar, SM, Pereira, SMB, Cchahuana, VZ, Passos, SP, Vanderlei, AD, Pavanelli, CA, Bottino, MA 2007, ‘Shear bond strength between metal alloy and a ceramic system, submitted to different thermocycling immersion times’, Acta Odontol. Latinoam, vol. 20, no. 2, pp. 97-102.
Shokry, TE, Attia, M, Mosleh, I, Elhosary, M, Hamza, T, Shen, C 2010, ‘Effect of metal selection and porcelain firing on the marginal accuracy of titanium-based metal ceramic restorations’, The Journal of Prosthetic Dentistry, vol. 103, no. 1, pp. 45-52.
Scolaro, JM, Valle, AL 2002, ‘Bonding ceramic to metal: A comparison using shear tests’,
Rev. FOB, vol. 10, no. 1, pp. 57-62.
Sastroasmoro S. Dasar-dasar metodologi penelitian klinis. Edisi 2. 2002:11-41, 79-95,220-286.
Smith, BGN 1987, Planning and making crowns and bridges (Dentistry in practice), Martin dunitz Ltd, London, pp. 130-185.
The Academy of Prosthodontics 2005, ‘The Glossary of Prosthodontic Terms’, The Journal of Prosthetic Dentistry,vol. 94, no. 1, pp. 29-30.
Tuncdemir, AR, Karahan, I, Polat, S, Malkoc, MA, Dalkiz, M 2013,’The effect of repeated porcelain firings on corrosion resistance of different dental alloys’, J Adv Prosthodont, vol. 5, pp. 44-50.
Vasconcellos, LGO, Buso, L, Lombardo, GHL, Souza, ROA, Junior, LN, Bottino, MA, Ozcan, M 2010,’Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy’, Journal of prosthodontics, vol. 19, pp. 471-477.
Venkatachalam, B, Goldstein, GR, Pines, MS, Hittelman, EL 2009, ‘Ceramic pressed to metal versus feldspathic porcelain fused to metal: A comparative study of bond strenght’,
Int J Prosthodont, vol. 22, no. 1, pp. 94-100.
Wight, TA, Bauman, JC, Pelleu, GB 2006, ‘An evaluation of four variables affecting the bond strength of porcelain to nonprecious alloy’, The journal of Prosthetic Dentistry, vol. 37, no. 5, pp. 570-577.
Wood, MC. A comparison of debonding strengths of four metal-ceramic systems with and
without opaque porcelain.Thesis.Dent Med. University of Connecticut. 2007.
Xu, N, Shin, C, Fukui, Y, Omori, S, Otake, S, Nemoto, R, Komada, W, Kumagae, N, Yoshida, K, Miura, H 2013, ‘The effect of prolonged holding time in firing schedules on the bond strength between the zirconia core and veneered porcelain’, Asian Pac J Dent, vol. 13, pp. 19-25.
Zakaria, MR, Jassim, HH 2003, ‘Evaluation of the effects of porcelain firing cycles on the marginal fit changes of porcelain-fused-to-metal crowns constructed utilizing two different marginal designs and alloys’, Al-Rafidain Dent J, vol. 3, no. 3, pp. 13-19.
