DAFTAR PUSTAKA
[1] Begum I, Zareena. “Plastics and Environment”. Dissemination Paper – 12. Centre of Excellence in Environmental Economics. Madras School of Economics. 2010.
[2] Kipngetich, Terer Erick and Hillary, Magut. “A blend of Green Algae and Sweet Potato Starch as a Potential Source of Bioplastic Production and Its Significance to the Polymer Industry”. International Journal of Green and Herbal Chemistry. Vol.2. Department of Chemistry, University of Eastern Africa, Baraton. 2013.
[3] A. Jones, M. Zeller, and S. Sharma, “Thermal, mechanical, and moisture absorption properties of egg white protein bioplastics with natural rubber and glycerol,” Prog. Biomater., vol. 2, no. 1, p. 12, 2013.
[4] et. al Cereda, M.P, “Characterization of Edible Films of Cassava Strach by Electron Microscopy,” J. Food Technol., pp. 91–95, 2000.
[5] Darni, Yuli, Sri Ismiyati D, Tigor Marbun. “Influence Concentration of Plasticizer and Formulation of Banana Starch – Chitosan to Mechanical Property and Water Uptake of Bioplastic”. International Journal of Engineering and Science. Vol. 1, No.4, 2010. Teknik Kimia. Fakultas Teknik. Universitas Malahayati Press. 2010.
[6] Plastice. 2013. “Future of Bioplastics”. 3rd International Plastice Conference. Cobro – Packaging Research Institute. Poland.
[7] Ave´rous, L. “Biodegradable Multiphase Systems Based on Plasticized Starch: a review”. Journal of Macromolecular Science – Part C Polymer Reviews, C4(3), 231–274. 2004.
[8] Badan Pusat Statistik, “Survey Pertanian Produksi Buah-buahan di Indonesia”, Biro Pusat Statistik, Jakarta, 2013.
[9] Kahn, Varda. “Characterization of Starch Isolated from Avocado Seeds”.
Jouurnal of Food Science. Volume 52, No. 6, 1987. Hal.1646
[11]Prashanth, K.V., Harish, K. L, Shamalab, T.R., dan Tharanathan, R.N. 2005. “Biodegradation of Kitosan-Graft-Polymethylmethacrylate Films”. Journal of International Biodeterioration & Biodegradation. 56: 115–120.
[12]Y. Darni, “Penentuan Kondisi Optimum Ukuran Partikel dan Bilangan Reynold Pada Sintesis Bioplastik Berbasis Sorgum,” J. Rekayasa Kim. dan Lingkung., vol. 8, no. 2, pp. 95–103, 2011.
[13]Yadav, G., & Satoskar. 1997. “Kinetic of Exposidation of alkyl Esters of Undercylenic Acid: Comparison of traditional Route us Ishii”. Venturello Chemistry , 74, 397-401.
[14]Bourtoom, Thawien. “Plasticizer Effect on the Properties of Biodegradable Blend Film From Rice Starch-Chitosan”. Songklanakarin J. Sci. Technol.30 (Suppl.1), 149-165, April 2008. Department of Material Product Technology, Faculty of Agro-Industry, Prince of Songkla University, Hat Yai, Songkhla, 90112, Thailand. Songklanakarin Journal of Science and Technology.
[15]M. H. S. Ginting, M. F. R. Tarigan, and A. M. Singgih, “Effect of Gelatinization Temperature and Chitosan on Mechanical Properties of Bioplastics from Avocado Seed Starch (Persea americana mill) with Plasticizer Glycerol,” Int. J. Eng. Sci., vol. 4, no. 12, pp. 36–43, 2015.
[16]Widyaningsih, Senny, Dwi Kartika, Yuni Tri Nurhayati. Pengaruh Penambahan Sorbitol dan Kalsium Karbonat Terhadap Karakteristik dan Sifat Biodegradasi Film dari Pati Kulit Pisang. Molekul, Vol. 7, No. 1. Program Studi Kimia, Fakultas Sains dan Teknik, Unsoed, Purwokerto. 2012.
[17]Lazuardi, Gilang Pandu dan Sari Edi Cahyaningrum. 2013. “Preparation and Characterization Based Bioplastic Chitosan and Cassava Starch with Glycerol Plazticizer”. Journal of Chemistry. Vol. 2 (3) : 161-166.
[18]K. J. Seal, “Test Methods and Standards for Biodegradable Plastics,” in Chemistry and Technology of Biodegradable Polymer, 1994.
[20]L. Avérous, “Polylactic Acid: Synthesis, Properties and Applications,” in Monomers, Polymers and Composites from Renewable Resources, 2008, pp. 433–449.
[21]L. Liu, J. L. Kennedy, and P. K. Joseph, “Selection of Optimum Extraction Technology Parameters in The Manufacture of Edible/Biodegradable Packaging Film Derivated from Food Based Polymers,” J. Agric. Environ., vol. 3, 2005.
[22]H. Herawati, “Potensi Pengembangan Produk Pati Tahan Cerna sebagai Pangan Fungsional,” J. Litbang Pertan., vol. 30, no. 024, 2011.
[23]D. R. Lu, C. M. Xiao*, S. J. Xu. Starch-based completely biodegradable polymer materials. College of Material Science and Engineering of Huaqiao University, Quanzhou, 362021, P. R. China. eXPRESS Polymer Letters Vol.3, No.6 (2009) 366–375.
[24]A.-C. Elliasson, Starch in Food: Structur, Function and Applications, First Publ. Cambridge: Woodhead Publishing Limited, 2004.
[25]J. BeMiller and R. Whistler, Starch: Chemistry and Technology. USA: Elsevier, 2009.
[26]Elida Purba. 2009. “Hidrolisis Pati Ubi Kayu (Manihot Esculenta) dan Pati Ubi Jalar (Impomonea batatas) menjadi Glukosa Secara Cold Process dengan Acid Fungal amylase dan Glukoamilase”. Lampung : Universitas Lampung
[27]Kolusheva, T. and A. Marinova. “A study of the Optimal conditions For Starch Hydrolysis Through Thermostable α –Amylase”. Journal of the University of Chemical Technology and Metallurgy, 42(1): 93-96.2007.
[28]M. Tako, Y. Tamaki, T. Teruya, and Y. Takeda, “The Principles of Starch Gelatinization and Retrogradation,” Food Nutr. Sci., vol. 5, pp. 180–291, 2014.
[30]Ganda Merisiyanto dan Lizda Johar Mawarani. Pengembangan Plastik Photobiodegradable Berbahan Dasar Umbi Ubi Jalar. Jurusan Teknik Fisika, Fakultas Teknologi Industri, Institut Teknologi Sepuluh Nopember (ITS). Jurnal Teknik Pomits Vol. 2, No. 1, (2013) ISSN: 2337-3539.
[31]Otto B. Wurzburg, Modified Starchs: Properties and Uses, United States : CRC Press Inc. (1989).
[32]Nelis Imanningsih. Profil Gelatinisasi Beberapa Formulasi Tepung-Tepungan Untuk Pendugaan Sifat Pemasakan. Penel Gizi Makan 2012, 35(1): 13-22
[33]A. Chandra, H. M. Inggrid, and Verawati, “Pengaruh pH dan Jenis Pelarut pada Perolehan dan Karakterisasi Pati dari Biji Alpukat,” Lemb. Penelit. dan Pengabdi. Masy., vol. 03, no. 7, pp. 30–39, 2013.
[34]B.A Orhevba and A.O Jinadu,”Determination Of Physico-Chemical Properties and Nutritional Contents Of Avocado Pear (Persea Americana M.)”, Journal Academic Research International, Vol. 1, No. 3, 2011, hal. 373 -374.
[35]Hika Citra Handayani A.P,” Pengaruh Peningkatan Konsetrasi Ekstrak Etanol 96% Biji Alpukat (Perseae americana Mill) Terhadap Formulasi Sabun Padat Transparan”, Skripsi. Program Studi Farmasi Universitas Islam Negeri Syarif Hidayatullah, Jakarta. 2009, hal. 28.
[36]Arukwe, U., Amadi, B.A., Duru, M. K.C., Agomuo,E.N., Adindu, E. A., Odika, P.C., Lele, K.C., Egejuru, L., and Anudike, J.,”Chemical Composition Of Persea Americana Leaf, Fruit and Seed”, IJRRAS, Vol. 11, No. 2, 2012, hal. 346-347.
[37]D. Listiyaningsih, “Manufacture and Characterization of Dioscorea esculenta Starch-Chitosan with Plasticizer Ethylen Glicol ,” Universitas Negeri
Semarang, Semarang, 2013.
[38]Erfan, Ahmad. 2012. Sintesis Bioplastik Dari Pati Ubi Jalar Menggunakan Penguat Logam ZnO Dan Penguat Alami Kitosan. Skripsi. Program StudiTeknik Kimia. Fakultas Teknik. Universitas Indonesia.
[40]S. Wijana, I. Nurika, and E. Habibah, “Analisis Kelayakan Kualitas Tapioka Berbahan Baku Gaplek (Pengaruh Asal Gaplek Dan Kadar Kaporit Yang Digunakan),” J. Teknol. Pertan., vol. 10, no. 2, pp. 97–105, 2009.
[41]A. Triyono, “Peningkatan Fungsional Pati dari Ubi Jalar (Ipomea batatas L.) dengan Enzim Alfa-Amilase (Bacillus subtilis) sebagai Bahan Substitusi Pengolahan Pangan,” J. Sains MIPA, vol. 13, no. 1, pp. 60–66, 2007.
[42]Zulharmita, S. Nola Dewi, and Mahyuddin, “Pembuatan Mikrokristalin Selulosa dari Ampas Tebu (Saccharum officinarum L.),” J. Sains dan Teknol. Farm., vol. 17, no. 2, pp. 158–163, 2012.
[43]Martunis, “Pengaruh Suhu Dan Lama Pengeringan Terhadap Kuantitas Dan Kualitas Pati Kentang Varietas Granola,” J. Teknol. dan Ind. Pertan. Indones., vol. 4, no. 3, 2012.
[44]Robyt, J.F. (1998). “Essentials of Carbohydrate Chemistry” , Springer, ISBN 0-38794951-8, New York, USA.
[45]] Utrilla, R. Coello M.E. Rodriguez, Huezo H. Carillo, Navas C. Hernandez, Jaimes E.J. Vernon, Carter J. Alvarez, Ramirez. 2013. “In Vitro Digestibility, Physicochemical, Thermal and Rheological Properties of Banana Starches”. 2013.
[46]M. A. Bertuzzi, “Mechanical properties of a high amylose content corn starch based film , gelatinized at low temperature Propriedades mecânicas de filme a base de amido de milho,” Brazilian J. Food Technol., vol. 15, no. 3, pp. 219– 227, 2012.
[47]A. M. Legowo, “Analisis Pangan,” Semarang, 2004.
[48]R. Amalia, “Karakterisasi Fisikokimia dan Fungsional Tepung Komposit Berbahan Dasar Beras, Ubi Jalar, Kentang, Kedelai, dan Xanthan Gum,” Universitas Sumatera Utara, 2013.
[49]Firmansyah, I. U. Suarni, and M. Aqil, “Keragaman Mutu Pati Beberapa Varietas Jagung,” Penelit. Pertan. Tanam. Pangan, vol. 32, no. 1, 2013.
[51]N. Guerrieri, University of Milan, Italy. Cereal proteins. Proteins in Food Processing.Woodhead Publishing in Food Science and Technology. 2000.
[52]Standar Nasional Indonesia. Cara Uji Makanan dan Minuman. SNI - 01-2891-1992. Badan Standardisasi Nasional
[53]Tomoko Sasaki, Takeshi Yasui, and Junko Matsuki. Effect of Amylose Content on Gelatinization, Retrogradation, and Pasting Properties of Starches from Waxy and Nonwaxy Wheat and Their F1 Seeds. Cereal Chemistry.Vol. 77, No. 1, 2000.
[54]J. S. Higley, J. E. Nelson, and K. C. Huber, “The Rapid Visco Analyzer as a Toolfor Differentiating Potato Genotypes on The Basis of Starch Pasting Properties,” University of Idaho, 2001.
[55]Nur Richana dan Titi Chandra Sunarti. Karakterisasi Sifat Fisikokimia Tepung Umbi dan Tepung Pati dari Umbi Ganyong, Suweg, Ubikelapa dan Gembili. Institut Pertanian Bogor. J.Pascapanen 1(1) 2004: 29-37
[56]ASTM D792-91. 1991. “Standard Test Method for Density and Specific Gravity (Relative Density) of Plastics by Displacement”. The American Society for Testing and Materials, Philadelphia, U.S.A
[57]ASTM D 638-00. Standard Test Method for Tensile Properties of Plastics. An American National Standard.
[58]Thermo Nicolet. Introduction Fourier Transform Infra Red Spectrometry. 2001. Madison.
[59]Pramudita, Indah, RN. 2013. “Pembuatan dan Karekteristik Plastik Biodegradable dari Campuran Limbah Plastik Polipropilen dan Kitosan Menggunakan Metode Tanpa Pelarut”. Skripsi. Fakultas Matematika dan Ilmu Pengetahuan Alam. Universitas Lampung.
[60]Setiawan, Hendri; Lutfi, Musthofa; Masruroh. “Optimasi Plastik Biodegradable Berbahan Jelarut (Marantha arundinacea L) dengan Variasi LLDPE untuk Meningkatkan Karakteristik Mekanik”. Jurnal Keteknikan Pertanian Tropis dan Biosistem. 2014. Vol. 2 (2): 124-130.
[62]Andy Chandra, Hie Maria Inggrid, dan Verawati. Pengaruh pH dan Jenis Pelarut pada Perolehan dan Karakterisasi Pati dari Pati Biji Alpukat. Lembaga Penelitian dan Pengabdian kepada Masyarakat. Universitas Katolik Parahyangan. 2013
[63]Akbar, Fauzi; Anita, Zulisma Dan Harahap, Hamidah. “Pengaruh Waktu Simpan Film Plastik Biodegradasi Dari Pati Kulit Singkong Terhadap Sifat Mekanikalnya”. Jurnal Teknik Kimia USU. 2013. Vol. 2: (2)
[64]AOAC. 1990. Official Methods of Analisis. “Determination of Moisture
Content”. Association of Official Analitycal Chemist. AOAC. Washington
DC. USA
[65]AOAC. 1990. Official Methods of Analisis. “Determination of Ash Content”. Association of Official Analitycal Chemist. AOAC. Washington DC. USA
[66]Silva, Gervásio Paulo da, Matthias Mack, Jonas Contiero. 2009. “Glycerol: A Promising and Abundant Carbon Source for Industrial Microbiology”. Biotechnology advances. Elsevier. Hal 31.
[67]Rahmawati, Wida, Yovita Asih Kusmawati, Dr, Nita Aryanti. ST, MT. 2012. “Karakterisasi Pati Talas (colocasia Esculenta (L.) Schott) Sebagai Alternatif Sumber Pati Industri di Indonesia”. Jurusan Teknik Kimia, Fakultas Teknik , Undip. Jurnal Teknologi Kimia dan Industri Vol. 1 No. 1 Hal 347-351
[68]J. E. Manatar, J. Pontoh, and M. J. Runtuwene, “Analisis Kandungn Pati dalam Batang Tanaman Aren (Arenga pinnata),” J. Ilm. Sains, vol. 12, no. 2, 2012.
[69]E. Ginting, Y. Widodo, A. Rahayuningsih, M. Yusuf. Karakteristik Pati Beberapa Varietas Ubi jalar, Didalam : Rahmi Yulianti dan Erliana Ginting, “ Perbedaan Karakteristik Fisik Edible Film dari Umbi Umbian yang dibuat dengan Penambahan Plasticizer”. Penelitian Pertanian Tanaman Pangan, 31 (2) 2012: hal. 131-136.
[70]S.L. Ezeoha dan J.N. Ezenwanne. “Production of Biodegradable Plastic Packaging Film From Cassava Starch”. IOSR Journal of Engineering (IOSRJEN). Vol. 3 Issue 10. October 2013
[72]P. Purworini, “Pemanfaatan Mikrokristal Selulosa Limbah Tandan Kelapa Muda (Cocos nucifera Linn) Sebagai Bahan Pengisi dalam Film Layak Makan Pati Tapioka dengan Gliserol sebagai Plastisiser,” Universitas Sumatera Utara, 2013.
[73]Maryam, A. Kasim, and Santosa, “Utilization Starch of Avocado Seed (Persea Americana Mill.) as a Raw Material for Dextrin,” J. Food Sci. Eng., vol. 6, pp. 32–37, 2016.
[74]L. P. Malanggi, M. S. Sangi, and J. J. E. Paendong, “Penentuan Kandungan Tanin dan Uji Aktivitas Antioksidan Ekstrak Biji Buah Alpukat ( Persea americana Mill .),” J. MIPA UNSRAT, vol. 1, no. 1, pp. 5–10, 2012.
[75]L. Yu, Biodegradable Polymer Blends and Composites from Renewable Resources. New Jersey: John Wiley & Sons, 2009.
[76]F. Xie, H. Liu, P. Chen, T. Xue, L. Chen, L. Yu, and P. Corrigan, “Starch Gelatinization under Shearless and Shear Conditions Starch Gelatinization under Shearless and Shear Conditions,” Int. J. Food Eng., vol. 2, no. 5, 2006.
[77]A. M. Pascoal, M. C. B. Di-Medeiros, K. A. Batista, M. I. G. Leles, L. M. Li??o, and K. F. Fernandes, “Extraction and chemical characterization of starch from S. lycocarpum fruits,” Carbohydr. Polym., vol. 98, no. 2, pp. 1304–1310, 2013.
[78]W. S. Ratnayake, R. Hoover, and T. Warkentin, “Pea starch: Composition, structure and properties - A review,” Starch/Staerke, vol. 54, no. 6, pp. 217– 234, 2002.
[79]A. Irwan, Sunardi, and A. Syabatini, “Acrylamide-based Superabsorbent Polymer (AAM) Grafted BananaTuber Starch (Musa paradisiaca),” Semirata FMIPA Univ. Lampung Proceeding, pp. 1–5, 2013.
[80]A. Wiyarsi and E. Priyambodo, “Pengaruh Konsentrasi Kitosan dari Cangkang Udang terhadap Efisiensi Penjerapan Logam Berat,” Yogyakarta, 2008.
[81]V. Suendo, L. O. Ahmad, and S. Valiyaveetiil, “Deasetilasi Kitin secara Bertahap dan Pengaruhnya terhadap Derajat Deasetilasi serta Massa molekul Kitosan,” J. Kim. Indones., vol. 5, no. 1, pp. 17–21, 2010.
[82]Q. P. Zhong and W. S. Xia, “Physicochemical Properties of Edible and Preservative Films from Chitosan/Cassava Starch/Gelatin Blend Plasticized with Glycerol,” Food Technol. Biotechnol., vol. 46, no. 3, pp. 262–269, 2008.
cereal, tuber and legume flour,” J. Food Sci. Technol., vol. 50, no. 1, pp. 94– 100, 2013.
[84]R. Pongsawatmanit, P. Thanasukarn, and S. Ikeda, “Effect of Sucrose on RVA Viscosity Parameters , Water Activity and Freezable Water Fraction,” ScienceAsia, vol. 28, pp. 129–134, 2002.
[85]E. Syamsir, P. Hariyadi, D. Fardiat, Andarwulan, and F. Kusnandar, “Karaterisasi Tapioka dari Lima Varietas Ubi Kayu (Manihot utilisima Crantz) Asal Lampung,” Jagrotek, vol. 5, no. 1, pp. 93–105, 2011.
[86]X. . Han and B. . Hamaker, “Amylopectin fine structure and rice starch paste breakdown,” J. Cereal Sci., vol. 34, no. 3, pp. 279–284, 2001.
[87]A. Kesarwani, P. Y. Chiang, and S. S. Chen, “Rapid Visco Analyzer Measurements of japonica Rice Cultivars to Study Interrelationship between Pasting Properties and Farming System,” vol. 2016, 2016.
[88]Jading, A., E. Tethool, P. Payung dan S. Gultom. 2011. Karakteristik Fisikokimia Pati Sagu Hasil Pengeringan Secara Fluidisasi Menggunakan Alat Pengering Cross Flow Fluidized Bed Bertenaga Surya dan Biomassa. Reaktor 13 (3): 155- 164.
[89]S. Agustin, “Effect of Non-starch Polysaccharides on Gelatinization Properties of Breadfruit Flour,” Teknol. Pertan., vol. 7, no. 1, pp. 28–35, 2011.
[90]T. Beta and H. Corke, “Genetic and environmental variation in sorghum starch properties,” J. Cereal Sci., vol. 34, pp. 261–268, 2001.
[91]Cho J, Joshi M.S dan Sun C.T. 2006. „‟Effect of Inclusion Size on Mechanical Properties of Polymeric Composites with Micro and Nano Particles‟‟. Compos. Sci. Technol, 66 : hal. 1941–1952.
[92]Roohani M, Habibi Y, Belgacern M.N, Ebrahim G, Karimi AN dan Dufresne A. 2008. „‟Cellulose Whiskers Reinforced Polyvinyl Alcohols Copolymers Nanocomposites‟‟. Eur. Polym. J, 44 : hal. 2489–2498.
[93]Spink, W. P dan Waychoff W.F. 1959. Plasticizers. Encyclopedia Issue. Hildrent Press, Inc. New York.
Minerals & Materials Characterization & Engineering, Vol. 9, No.1, pp.43-55, 2010
[95]Khaswar Syamsu, Chilwan Pandji, dan Eva Rosalina Lumbanraja, “Pengaruh Penambahan Polioksietilen-(20)-Sorbitan Monolaurat Pada Karakteristik Bioplastik Poli-Hidroksialkanoat (PHA) Yang Dihasilkan Ralstonia eutropha
Pada Substrat Hidrolisat Pati Sagu”. Departemen Teknologi Industri Pertanian, Fakultas Teknologi Pertanian – IPB. J. Tek. Ind. Pert. Vol. 18(1), 41-46.
[96]Rossi, M. “Glycerol: Properties and Production”. Future Of Glycerol. ISBN : 978-0-85404-124-4. 2008. Springer
[97]I. G. Sanjaya and T. Puspita, “Pengaruh Penambahan Kitosan dan Plasticizer Gliserol pada Karakteristik Plastik Biodegradable dari Pati Limbah Kulit Singkong,” 2008.
[98]Nur Alim Bahmid, Khaswar Syamsu, dan Akhiruddin Maddu. “Influence Of Cellulose Acetate Fibers Size And Diethylen Glikol (DEG) Addition On Physical And Mechanical Properties Of Bioplastics”. Jurnal Teknologi Industri Pertanian .24 (3):226-234 (2014).
[99]Utami, Meilina Rahayu dan Latifah dan NuniWidiarti. 2014. “Sintesis Plastik Biodegradable dari Kulit Pisang dengan Penambahan Kitosan dan Plasticizer Gliserol”. Indonesian Journal of Chemical Science. Vol. 3 (2) : 163-167.
[100]Nathiqoh Al Ummah. Uji Ketahanan Biodegradable Plastic Berbasis Tepung Biji Durian (durio zibethinus Murr) Terhadap Air dan Pengukuran Densitasnya. Jurusan Fisika. Fakultas Matematika dan Ilmu Pengetahuan.Universitas Negeri Semarang. Skripsi. 2013.
