USER'S MANUAL
Wireless-N Media Extender
PME200
Chapter 1 Introduction
2
1.1 Overview
2
1.2 Features
2
1.3 Package
Contents
2
1.4 Application
Scenarios
3
Chapter 2 Installation
4
2.1 Wireless-N Media S
4
2.2 Wireless-N Media R
5
2.3 Buttons & Components functions
6
2.4 LED Indicators Behaviors
6
Chapter 3 Setup Procedures / Steps
7
Chapter 4 Hardware Specifications
9
4.1 Wireless
Features
9
4.2 Wireless-N Media S Features
9
4.3 Wireless-N Media R Features
10
Chapter 5 Technical Support
11
Federal Communications Commission (FCC)
Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
needed.
1.1
Overview
The PROLiNK® PME200 Wireless-N Media Extender system combine the unique i-NIC card
with high performance Video adapter, to play any Multi-media source by 2.4GHz, wireless
802.11n/b/g connection. No configuration is necessary and no new UI to learn. Attempt to
provide a convenient experience for user. User could transmit media contents from PC, Notebook,
Home media center, every system use VGA / Component / CVBS port with good flexibility. The
most important is wireless plug and play, user could setting content source and display more
easily.
1.2
Features
f Easily integrates into any HD / Projector application.
f Enables wireless transmission of VGA, CVBS, Component and S-video around home.
f Supports most video resolutions including 480i/p, 576i/p and 720p.
f Coexists with 802.11n/b/g 2.4GHz cordless phones.
f 10 meters range indoors, no line of sight is required.
f 4 Wi-Fi channels select for resist interfere.
f 4 source inputs & 2 source outputs.
1.3
Package Contents
The following items should be included:
f 1 x Wireless-N Media S
f 1 x Wireless-N Media R
f 2 x Power adapter
f 1 x User Manual
f 1 x Quick Installation Guide
f 2 x VGA Cable
f 6 x 2dbi Antennas
2.1
Wireless-N Media S (Sender)
Front View
(1)
Wireless antenna x 3 units
(2)
Power button
(3)
Source button
(4)
Channels button
Rear View
(5)
Reset button
(6)
Audio Input
(7)
VGA Input
(8)
Component (YPbPr) Input
(9)
S-Video Input
(10)
Composite Input
(11)
Power Input (12V DC)
Top View
(12)
Antenna ports
(13)
Wi-Fi LED
(14)
CH 1 LED
(15)
CH 2 LED
(16)
CH 3 LED
(17)
CH 4 LED
(18)
VGA LED
(19)
Components LED
(20)
S-Video LED
(21)
Composite LED
2.2
Wireless-N Media R (Receiver)
Front View
(1)
Wireless antenna x 3 units
(2)
Power button
(3)
Source button
(4)
Channels button
Rear View
(5)
Reset button
(6)
Audio Input
(7)
VGA Input
(8)
Component (YPbPr) Input
(9)
Power Input (12V DC)
Top View
(10)
Antenna ports
(11)
Wi-Fi LED
(12)
CH 1 LED
(13)
CH 2 LED
(14)
CH 3 LED
(15)
CH 4 LED
(16)
VGA LED
(17)
Components LED
2.3
Buttons & Components functions:
View Buttons/Components S R Functions
Wireless antenna z z 3 Pcs of 2dBi detachable antennas.
Power button z z Switch the button to turn on or off the power supply.
Source button z z Click the button to switch media sources or keep on pushing the button to switch input media sources continuously.
Front V
iew
Channels button z z
Click the button to switch Wi-Fi channels.
Notice: When the transmitter channel is switched the receiver channel will be switched simultaneously.
Reset button z z Reset This button is for reset to default setting. Audio z z Audio Connect the audio cable for audio output. VGA z z Connect the VGA cable to the corresponding VGA port.
Component (YPbPr) z z Connect the Component cables to the corresponding Component connection ports.
S-Video z Connect the S-Video cable to the S-Video port. Composite z Connect the CVBS cable to the CVBS port.
Rear View
Power (12V DC) z z 12V DC Connect the power adapter to the power DC port. Antenna ports z z Detachable antenna to be connected.
Wi-Fi LED z z CH 1 LED z z CH 2 LED z z CH 3 LED z z CH 4 LED z z VGA LED z z Components LED z z S-Video LED z Top V ie w Composite LED z
Refers to below 2.4 LED Indications Behaviors
‘S’ referring to Wireless-N Media S; ‘R’ referring to Wireless-N Media R
2.4
LED Indications Behaviors
LED Color Behavior Indication
On Wireless function is active Green
Blinking Data transmitting Wi-Fi
Red Blinking Data transmitting overflow On Wireless channel is active CH1 ~ CH4 Blue
Blinking Switching channels On VGA source is active VGA Blue
Blinking Switching sources On Component source is active Component
(YPbPr) Blue Blinking Switching sources On S-Video source is active S-Video Blue
Blinking Switching sources On CV source is active Composite Blue
Chapter 3
Setup Procedures / Steps
3.1
Connect the PROLiNK
®PME200 Wireless-N Media S with cables to media input
sources, such as a video device or a DVD player.
3.2
And connect PROLiNK
®PME200 Wireless-N Media R with cables to media output
3.3
Then, connect both devices power adapters to outlets.
3.4
Turn on both wireless video devices power.
3.5
After finished above set up steps, the wireless video transceivers will be ready to
transmit media.
Chapter 4
Hardware Specifications
4.1
Wireless Features
Standard IEEE 802.11n/b/g Standard
Antenna Type External Dipole antenna 2dBi
1. CH 1: Channel 3
2. CH 2: Channel 6
3. CH 3: Channel 9
Number of Selectable
Channels
4. CH 4: Channel 11
Output Power 14 ~17 dBm @ normal temp
Receiver Sensitivity -75~ -86 dBm @ normal temp
Operating Temperature: 0~40°C ambient temperature
Environment Specifications
(Total System) Operating humidity: 90% maximum (non-condensing)
4.2
Wireless-N Media S Features
1. Composite
2. S-Video
3. Component (YPbPr)
Video Inputs
4. VGA
1. Composite: NTSC / PAL / SECAM
2. S-Video: NTSC / PAL / SECAM
3. Component (YPbPr):
f480i/p
f576i/p
f720p (50/60Hz)
f1080i/p (50/60Hz)
Inputs Format
4. VGA:
f 640X480
f 800X600
f 1024X768
f 1280X768
f 1280X1024
Audio Input Stereo with 3.5mm line-in jack
PCM Encode 48KHz 16-bit sampling
Weight: 366 g
Physical Specifications
Dimension: 179 (L) x 106(W) x 23.5(H) mm
Adapter Power DC 12V*1A
LED Indicator fWLAN status
f 4 Wi-Fi Channels
f4 Video Sources Input
Operating Temperature: 0~40°C ambient temperature
Environment Specifications
4.3
Wireless-N Media R Features
1. Component (YPbPr)
Video Outputs
2. VGA
1. Component:
f
480p (60Hz)
f 576p (50Hz)
f 720p (60Hz)
2. VGA:
f 640x480
f 800X600
f 1024X768
f 1280X768
f 1280X1024
Output Format & Frequency
Notice: Frame rates also depended on the WiFi bandwidth
Audio Output Stereo with 3.5mm line-in jack
PCM Encode 48KHz 16-bit sampling
Weight: 360 g
Physical Specifications
Dimension: 179 (L) x 106(W) x 23.5(H) mm
Adapter Power DC 12V*1A
LED Indicator WLAN status / 4 Wi-Fi Channels / 2 Video Sources Output
Operating Temperature: 0~40°C ambient temperature
Environment Specifications
Chapter 5
Technical Support
REGISTER ONLINE FOR FREE WARRANTY.
FREE TECHNICAL SUPPORT HOTLINE:
Monday to Friday, 9.00 am – 6.00 pm
(Closed on Saturdays, Sundays and Public Holidays)
• Singapore
: (65) 6357 0666
• Malaysia
: (60) 3 8023 9151
• Indonesia :
(62) 21 628 3205
WALK-IN SUPPORT:
Monday to Friday, 9.00 am – 6.00 pm
(Closed on Saturdays, Sundays and Public Holidays)
• Singapore
FIDA INTERNATIONAL (S) PTE LTD
Block 16 Kallang Place, #06-02 Kallang Basin Industrial Estate, Singapore 339156.
• Malaysia
FIDA SYSTEMS (M) SDN BHD
29 Jalan USJ 1/31, 47600 Subang Jaya, Selangor Darul Ehsan, Malaysia.
• Indonesia
PROLiNK INDONESIA
P. Jayakarta Komplek 85 BR/AJ, Jakarta Pusat - Indonesia.
ONLINE TECHNICAL SUPPORT:
• Singapore
: support@fida.com
• Malaysia
: support_my@fida.com
• Indonesia :
support@prolink.co.id
PROLiNK® is a trademark of Fida International (S) Pte Ltd and is manufactured under its authority. All other
brands, products, services, logos and company names mentioned herein are trademarks of their respective owners.
All specifications, designs and contents are subject to changes without prior notice. © Copyright 2010. PROLiNK all
Register Online For Your Product Warranty
www.prolink2u.com
SINGAPORE
FIDA INTERNATIONAL (S) PTE LTD
Block 16 Kallang Place, #06-02 Kallang Basin Industrial Estate, Singapore 339156.
Tel : (65) 6357 0668
Email : support@fida.com
MALAYSIA
FIDA SYSTEMS (M) SDN BHD
29 Jalan USJ 1/31, 47600 Subang Jaya, Selangor Darul Ehsan, Malaysia.
Tel : (60) 3 8024 9151
Email : support_my@fida.com
INDONESIA
PROLiNK INDONESIA
Jl. Cideng Barat No. 79, Jakarta Pusat 10150 - Indonesia.
Tel : (62) 21 3483 1777 Email : support@prolink.co.id
BUKU MANUAL
Wireless-N Media Extender
PME200
BAB 1 Pendahuluan
2
1.1 Tinjauan
2
1.2 Fitur-Fitur
2
1.3 Isi
Paket
2
1.4 Aplikasi
Skenario
3
BAB 2 Instalasi
4
2.1 Wireless-N Media S
4
2.2 Wireless-N Media R
5
2.3 Tombol dan Fungsi Komponen
6
2.4 Indikator
LED
6
BAB 3 Setup Prosedur / Langkah
7
BAB 4 Spesifikasi Hardware
9
4.1 Fitur
Wireless
9
4.2 Fitur Wireless-N Media S
9
4.3 Fitur Wireless-N Media R
10
BAB 5 Technical Support
11
Federal Communications Commission (FCC)
Pernyataan Interferensi
Perangkat ini sesuai dengan Bab 15 dari Peraturan FCC. Dimana Pengoperasian berdasarkan
pada dua kondisi berikut: (1) perangkat ini mungkin tidak menimbulkan gangguan yang
membahayakan, dan (2) perangkat ini dapat menerima gangguan, termasuk gangguan yang
dapat menyebabkan pengoperasian yang tidak dikehendaki.
CATATAN: Peralatan ini telah diuji dan dinyatakan sesuai dengan batasan untuk peralatan
digital Kelas B, sesuai dengan Bab 15 dari Peraturan FCC. Batasan ini dirancang untuk
memberikan perlindungan terhadap gangguan gangguan di instalasi perumahan. Peralatan ini
menggunakan dan dapat memancarkan energi frekuensi radio dan jika dipasang dan digunakan
tidak sesuai dengan petunjuk, maka dapat menyebabkan gangguan pada komunikasi radio.
Namun, tidak ada jaminan bahwa interferensi tidak akan terjadi dalam instalasi tertentu. Jika
peralatan ini menyebabkan gangguan penerimaan radio atau televisi, maka dapat dilakukan
dengan mencoba mematikan dan menghidupkan kembali peralatan, pengguna dianjurkan untuk
mencoba memperbaiki interferensi dengan satu atau lebih dari langkah-langkah berikut:
1.
Reorientasi atau memindahkan antena penerima.
Meningkatkan pemisahan antara peralatan dan penerima.
2.
Hubungkan peralatan ke stop kontak pada sirkuit yang berbeda yang dibutuhkan oleh
penerima.
1.1
Tinjauan
PROLiNK® PME200 Wireless-N Media Extender sistem menggabungkan sistem yang
unik dari i-NIC dengan video adaptor performa tinggi, untuk memutar Multi-media
apapun melalui koneksi wireless 2.4GHz, 802.11n/b/g. Tidak ada konfigurasi yang
diperlukan. Upaya untuk memberikan pengalaman yang nyaman bagi pengguna.
Pengguna bisa mengirimkan isi media dari PC, Notebook, Media center. Setiap sistem
menggunakan VGA / Component / CVBS port dengan fleksibilitas yang baik. Yang paling
penting adalah plug and play wireless, pengguna dapat memilih sumber dan
menampilkan konten dengan lebih mudah.
1.2
Fitur-Fitur
f
Mudah, dan terintegrasi ke dalam setiap aplikasi HD / Projector.
f
Memungkinkan transmisi wireless VGA, CVBS, Component dan S-video.
f
Mendukung semua resolusi video termasuk 480i/p, 576i/p dan 720p.
f
802.11n/b/g 2.4GHz dapat berdampingan dengan telepon cordless.
f
Jangkauan 10 meter di dalam ruangan, tidak ada garis pandang diperlukan.
f
Ada 4 pilihan channel Wi-Fi agar dapat menghindari interferensi.
f
Ada 4 sumber input dan 2 sumber output.
1.3
Isi Paket
Berikut isi dari paket yang harus ada:
f 1 x Wireless-N Media S
f 1 x Wireless-N Media R
f 2 x Power adapter
f 1 x Buku Manual
f 1 x Petunjuk Instalasi Cepat
f 2 x Kabel VGA
f 6 x 2dbi Antena
2.1
Wireless-N Media S (Sender)
Tampak Depan
(1)
Wireless antena x 3 pcs
(2)
Tombol Power
(3)
Tombol Source
(4)
Tombol Channels
Tampak Belakang
(5)
Tombol Reset
(6)
Audio Input
(7)
VGA Input
(8)
Component (YPbPr) Input
(9)
S-Video Input
(10)
Composite Input
(11)
Power Input (12V DC)
Tampak Atas
(12)
Antenna ports
(13)
Wi-Fi LED
(14)
CH 1 LED
(15)
CH 2 LED
(16)
CH 3 LED
(17)
CH 4 LED
(18)
VGA LED
(19)
Components LED
(20)
S-Video LED
(21)
Composite LED
2.2
Wireless-N Media R (Receiver)
Tampak Depan
(1)
Wireless antena x 3 pcs
(2)
Tombol Power
(3)
Tombol Source
(4)
Tombol Channels
Tampak Belakang
(5)
Tombol Reset
(6)
Audio Input
(7)
VGA Input
(8)
Component (YPbPr) Input
(9)
Power Input (12V DC)
Tampak Atas
(10)
Antenna ports
(11)
Wi-Fi LED
(12)
CH 1 LED
(13)
CH 2 LED
(14)
CH 3 LED
(15)
CH 4 LED
(16)
VGA LED
(17)
Components LED
2.3
Tombol dan Fungsi Komponen:
View Tombol/Komponen S R Fungsi
Wireless antenna z z 3 Pcs dari 2dBi detachable antennas.
Tombol Power z z Tombol untuk menghidupkan atau mematikan listrik. Tombol Source z z Tombol untuk mengaktifkan sumber media yang dikehendaki.
Ta mp ak D ep an Tombol Channels z z
Tombol untuk memilih channel Wi-Fi.
Perhatikan: Bila saluran pemancar diaktifkan saluran telepon akan diaktifkan secara bersamaan.
Tombol Reset z z Tombol ini untuk reset ke pengaturan default
Audio z z Input Audio untuk menghubungkan kabel audio output. VGA z z Hubungkan kabel VGA ke port VGA yang sesuai.
Component (YPbPr) z z Hubungkan kabel Component Komponen yang sesuai dengan port koneksi. S-Video z Hubungkan kabel S-Video ke port S-Video.
Composite z Hubungkan kabel CVBS ke port CVBS.
Tampak Be
laka
ng
Power (12V DC) z z 12V DC power adaptor. Antenna ports z z Tempat Antena.
Wi-Fi LED z z CH 1 LED z z CH 2 LED z z CH 3 LED z z CH 4 LED z z VGA LED z z Components LED z z S-Video LED z Ta mp ak Ata s Composite LED z
Mengacu ke Indikasi LED point 2.4
‘S’ mengacu ke Wireless-N Media S; ‘R’ mengacu ke Wireless-N Media R
2.4
Indikator LED
LED Warna Kondisi Indikasi
On Fungsi Wireless aktif Hijau
Berkedip Data Transmit Wi-Fi
Merah Berkedip Data Transmit overflow On Channel Wireless aktif CH1 ~ CH4 Biru
Berkedip Perpindahan channels On VGA Aktif VGA Biru
Berkedip Perpindahan sumber On Component Aktif Component
(YPbPr) Biru Berkedip Perpindahan sumber On S-Video Aktif S-Video Biru
Berkedip Perpindahan sumber On CV Aktif
Composite Biru
