4. Diharapkan untuk mencari lokasi yang tenang dan tidak adanya getaran J.A.Schey, 1987. Introduction to Manfacturing Processes, International Editions.
Mc Grow-Hill International Editions.
Kalpakjian, S. 1995, Manufacturing Engineering and Technology. Third Edition. Addison-Wesley Publishing Company.
Kendall, A.L.,2005, Tool Life And Tool Wear, Metals Handbook, 10th Ed. Machining Processes, ASM International 16, pp.666-677.
Kulkarni, Atul P, Dry turning of AISI 304 Austenitic Stainless Steel Using AlTiCrN Coated Insert Produced by HPPMS Technique, prcedia engineering 64, pp 737-746
Lalbondre, Rajshekhar. Krishna, Prasad. C, Mohankumar G, 2013, Machinability Studies Of Low Alloy Steels By Face Turning Method:An Experimental
Investigation, Procedia Engineering 64, pp. 632-641.
Lim, C.Y.H., Lau,P.P.P., Lim,S.C., 2001, the effects of work material on tool wear, Wear 250, pp. 334-348.
Narasimhulu, A, 2012, Dry Machining of Ti-6Al-4V using PVD Coated, TiAlN Tools , Proceedings of the World Congress on Engineering 2012 Vol III
Nordgren, A, 2014, Experimental study and modeling of plastic deformation of cemented carbide tools in turning, Procedia CIRP 14, pp 599-604 Rochim, Taufiq. 1993, Teori dan Teknologi Proses Pemesinan, Bandung :
Penerbit ITB.
Srithar, A, 2014, Experimental Investigation and Surface Roughness Analysis on Hard turning of AISI D2 Steel Using Coated Carbide Insert, Procedia Engineering 97, pp 72-77
S, Swapnagandha, 2013, Machinability studies of austenitic stainless steel (AISI 304) using PVD cathodic arc evaporation (CAE) system deposited
AlCrN/ TiAlN coated carbide inserts, Procedia Engineering 64, pp 907-914.
