GEOMETRY EFFECT OF CARBIDE CUTTING TOOL ANGLE Page 90 of 138
TO THE TOOL LIFE AND WEAR OF THE LATHE PROCESS ON S45C BY USING ANSYS SOFWARE
Listyantomo Budhi Prastiwi REFERENCES
[1] Rochim, Taufik. 2001. “Spesifikasi, Metrologi, dan Kontrol Kualitas Geometrik” Industrial Metrology Laboratory Mechanical dan Production Engineering (MPE). FTI-ITB Bandung.
[2]. Rao, P.N., 2000. Manufacturing Technology, Metal Cutting and Machine Tools, Singapore: McGraw Hill Higher Education.
[3] Shaw, Milton C., 2005. Metal Cutting Principles, Oxford: Oxford University Press.
[4] Stephenson, David A. 2006. Metal Cutting Theory and Practice. CRC Taylor and Francis Group
.
[5] Rochim, Taufiq, Teori dan Teknologi Proses Pemesinan, Laboratorium Teknik Produksi, FTI, Institut Teknologi Bandung, 1993
[6] Groover, Mikell P. 2010. Fundamentals of Modern Manufacturing Fourth Edition. New Jersey: John Wiley & Sons, Inc.
[7] Kalpakjian, Serope and R.Schmid, Steven. 2009. Manufacturing Engineering and Technology, sixth edition. New York: Prentice Hall.
[8] Mackerle, J., Finite Element Analysis and Simulation of Machining: a
Bibliography (1976 – 1996), Journal of Materials Processing Technology, 86, 17-44, 1999.
[9] Oxley, P.L.B., Mechanics of Machining: An Analytical Approach to Assessing Machinability, Ellis Horwood, Chichester, West Sussex, pp. 223-227, 1989.
[10] Gunay, M., Korkut, I. & Seker, U., Experimental Investigation of The Effect of Cutting Tool Rake Angle on Main Cutting Force, Journal of Material
Processing Technology, 166, 44–49, 2005.
[11] Lo, S.P. An Analysis of Cutting Under Different Rake Angles Using the Finite Element Method, Journal of Materials Processing Technology, 105, 143–151, 2000.
[12] Groover, Mikell P. 2010. Fundamentals of Modern Manufacturing 4th -ed.
New Jersey: John Wiley & Sons, Inc.
GEOMETRY EFFECT OF CARBIDE CUTTING TOOL ANGLE Page 91 of 138
TO THE TOOL LIFE AND WEAR OF THE LATHE PROCESS ON S45C BY USING ANSYS SOFWARE
Listyantomo Budhi Prastiwi [13] http://www.astmsteel.com/product/jis-s45c-steel-machine-structural/ accessed
on 1 July 2018
[14] S.Rao Singiresu. 2004.The Finite Element Method in Engineering Fourth Edition. Amsterdam.Elsevier Science& Technology Books.
[15] Trent, E.M. 1984. Metal Cutting. 2nd -ed. London: Butterworths & Co (Publishers) Ltd. 49
[16] Williams, J.E., Smart, E.F. and Milner, DR., Metallurgia, 81, (3), 51, 89 (1970) [17] Eggleston, D.M., Herzog, R. and Thomson, E.G., J. of Engineering for Industry,
August, 263(1959)
[18] Trent .M, Edward and Wright K. Paul.2000. Metal cutting -4th ed,USA:
Butterworth–Heinemann.
[19] Rochim, Taufiq. 1993. “Teori dan Teknologi Proses Pemesinan” ITB.
Bandung
[20] Serope, Kalpakjian. 1997. Manufacturing Engineering and Technology, second Edition, Addison Wesley
[21] http://www.wolfram.at/wpcontent/uploads/2017/04/Allgemeine accessed on 1 July 2018
