58
DAFTAR PUSTAKA
Ahmad, Ekoyanto, P., dan Bambang A., 2011. Rancang Bangun Dan Uji Performansi Tungku Keramik Berpipa Spiral Dengan Bahan Bakar Padat. Skripsi. Universitas Brawijaya, Malang.
Akbar, A., Coniwanti, P., Paindoman, R., 2013. Pengaruh variabel waktu dan temperatur terhadap pembuatan asap cair dari limbah kayu pelawan (cyanometra cauliflora). Skripsi. Universitas Sriwijaya, Malang.
Angga, S., Sucipto, E., Sudarsono, I., 2016. Pengolahan Sampah Plastik dengan Metoda Pirolisis menjadi Bahan Bakar Minyak. Skripsi. Politeknik Negeri Bandung, Bandung.
Amiruddin, Sutopo, B., dan Rochmadi, 2012. Sistem Kontrol Suhu dan Laju Pemanasan Alat Pirolisis. Universitas Gajah Mada, Yogyakarta.
Al-Salem, S.M., Lettieri, P., Baeyens, J., 2009. Recycling and Recovery These solid plastic waste (PSW): a review
Aburiazaiza, A.S., Barakat, M.A., Miandad, R, Nizami, R., 2016. From the catalytic pyrolysis of plastic waste.Energy Fuels, 5:407-423
Arabiourrutia, M., Elordi, G., Lopez, G., Borsella, E., Bilbao, J., Olazar, M., 2012. Characterization of the waxes obtained by the pyrolysis of polyefin plastics in a conical spouted bed reactor. Analytical and Applied Pyrolysis. 94 : 230-237
Bajus, M., Hájeková E., 2010. Thermal cracking of the model seven components mixed plastics into oil/waxes.Petroleum & Coal. 52: 164-172
Bakkara, 2007. Pembuatan Asap Cair dari Tempurung Kelapa. Laporan Penelitian, Jakarta.
Bazargan, A., Hui, C., McKay, G., 2013. Carbon Porous Than Plastic Waste
Budian, A., 2004. Pengeringan Biological Sludge PT. Indonesia Toray Synthetics dengan Menggunakan Dehydrator dan Sludge Drum Dryer. Skripsi. Politeknik Negri Bandung, Bandung.
59
Buekens, AG, Huang, H., 2008. Catalytic plastics cracking for recovery of gasoline- range hydrocarbons from municipal plastic wastes. Resource Conservation Recycle, 23: 163-181
Begley, T.H, Hollifield, H.C., 2009. High-performance liquid chromatographic determi- nation of migrating polyethylene terephthalate oligomers in corn oil.J Agric Food Chem, 38: 145-180
Brems, A., Baeyens, J., Dewil, R., 2012. Recycling and recovery of post-consumer plastic solid waste in a European context. Thermal Science, 16: 669-685.
Cahyono, N., Mandala, P., Ma’arif, Sukarjo, Wardoyo, T., 2016. Pengaruh Suhu terhadap Rendemen dan Nilai Kalor Minyak Hasil Pirolisis Sampah Plastik. Skripsi. Jurnal Mekanika dan Sistem Termal, 1: 49-59
Chen, D., Yin, L., Wang, H., Dia, P., 2014.Pyrolysis technology for solid waste: a review.Managing Waste. 34 : 2466-2486.
Darmadji, P, 2002. Dampak Limbah Polimer Terhadap Lingkungan. Universitas Surabaya, Surabaya.
Darsam, 2012. Alat/ Mesin Penyuling. Departemen Pendidikan Institut Pertanian Bogor, Bogor.
Daywin, F. J., R. G. Sitompul, dan Hidayat, 2008. Mesin-Mesin Budidaya Pertanian di Lahan Kering. Graha Ilmu. Yogyakarta
Diez, MA, Melendi, S., Alvarez, R., Barriocanal, C., 2009.Recycled raw materials waste plastic / oil mixture in cokemaking.Energy Fuel22: 88-101.
Engineering TB, 2008. Recommended maximum air velocities in ventilation ducts.
http://www.engineeringtoolbox.com/flow-velocity-air-ducts-d_388.html.[12 Maret 2017].
Engineering TB, 2009. Recommended maximum air velocities in ventilation ducts. http://www.engineeringtoolbox.com/thermal-conductivity-d_429.html [12 Maret 2017].
Engineering TB, 2010. Recommended maximum air velocities in ventilationducts.
Engineering TB, 2011. Recommended maximum air velocities in ventilation ducts. http://www.engineeringtoolbox.com/metal-alloys-densities-d_50.html [12 Maret 2017].
Gabe, F. A., 2015. Analisa Termal Pada Rancang Bangun Reaktor Pirolisis Untuk Memproduksi Bahan Bakar Minyak Dari Limbah Plastik. Skripsi. Institut Pertanian Bogor, Bogor.
Giatman, M., 2006. Ekonomi Teknik. PT. Raja Grafindo Persada, Jakarta.
Gug, J., Cacciola, D., Sobkowicz, M.J., 2015. Processing and properties of solid fuel energy from municipal solid waste and recycled plastic. Energy Fuel,
Haris dan Kresno, 2005. Arang Kayu. Badan Penelitian dan Pengembangan Kehutanan, Bogor.
Haygreen, J.G., Bowyer, J.L., and Schmulsky. R. 2003. Forest Product and Wood Sciences an Introduction. Ames IOWA State, University Press.
Haryadi, S., 2015. Pengaruh Arah Aliran Air Pendingin Pada Kondensor Terhadap Hasil Pengembunan Proses Pirolisis Limbah Plastik, [Skripsi]. Universitas Negeri Semarang, Semarang.
Holman, J. P, 2010. Heat Transfer, 10th Edition. Department of Mechanical Engineering Southern Methodist University (US). McGraw-Hill.
Husnan, S., 2000. Manajemen Keuangan Teori dan Penerapan, Edisi Ketiga. UPP AMP YKPN, Yogyakarta.
Jumaidi, S., 2014. Jenis- Jenis Polimer. Bab II Tinjauan Pustaka. digilib.unila.ac.id/1969/7/BAB%20II.pdf
[21 Februari 2017]
Kato, K., Namura, S., Uematsu, H. 2002.Development of waste plastic recycling process using the coke oven. Waste Manage, 42: 10-19
Kumar, S., Singh, R. K., 2011.Recovery of hydrocarbon liquids of high density polyethylene waste by pyrolysis thermal.The European Refining Technology Conference. 28: 659-667
Kurniawan, I., Martin, A., Mintarto, 2015. Rancang Bangun Kondenser pada Pengering Beku Vakum. Skripsi. Fakultas Teknik, Universitas Riau.
61
Lienhard IV JH, Lienhard V JH., 2003. A Heat Transfer Textbook, 3rd Edition. Massachucetts (US), Phlogiston Press.
Mandatya, V., 2015. Rancang Bangun Alat Pengolahan Limbah Polimer Pertanian. Skripsi. Universitas Sumatera Utara, Medan.
Meiriza, V.P.C., Priyo, R.E., Safitri, D.P., dan Widi, R.A., 2012. Polipropilena (PP). Politeknik Negeri Semarang, Semarang.
Mujiarto, I., 2005. Sifat Dan Karakteristik Material Plastik Dan Bahan Aditif. AMNI, Semarang.
McCabe, W., Smith, J., Harriott, P., 2005. Unit Operation of Chemical Engineering, 7th edition. McGraw-Hill, Singapore.
Miskolczi, N., Bartha, L., Deak, G., Jover, B., 2004. Thermal degradation of municipal plastic waste for production of fuel-like hydrocarbons.Polymer Degradstab, 86: 357-466.
Miskolczi N., Nagy R., 2012. Hydrocarbons obtained by waste plastic pyrolysis: comparative analysis of decomposition described by different kinetic models. Fuel Processing Technology.104: 96-104
Nurhidayat, 2007. Sintesis Poliblend Antara Polistiren Dengan Pati Tapioka Serta Karakteristiknya. Skripsi. Institut Teknologi Bandung, Bandung.
Onny, 2013. Macam-macam Heat Exchanger.
http://artikel-teknologi.com/macam-macam-heat-exchanger-alat-penukar-panas-bagian-2/ [14 Agustus 2017].
Prima, 2011. Rancang Bangun Alat Pembuat Arang Kayu Skala Laboratorium Kapasitas 15 Kg. Skripsi. Universitas Diponegoro, Semarang.
Purba, R. 2007. Analisa Biaya dan Manfaat. PT. Rineka Cipta, Jakarta.
Purnomo, H., 2004. Pengantar Teknik Industri. Graha Ilmu, Yogyakarta.
Purwanto, D. 2011. Arang dari Limbah Tempurung Kelapa Sawit. Jurnal Penelitian Hasil Hutan.29: 57 - 66.
Purwono, 2002. Penggunaan Pengukuran Brix Untuk Menduga Rendemen Nyata Di Pabrik Gula Gula Putih Mataram, Lampung. Divisi R & D PG GPM.
62
Rohsenow, W.M., & Harnett, J.P., 2001. Handbook of Heat Transfer. McGraw-Hill Book Company, Singapore.
Saptoadi, H., 2011. Bahan Bakar Padat Dari Bumi Indonesia Untuk Kemandirian Dan Kesejahteraan Bangsa. UGM, Yogyakarta.
Santoso, 2010. Uji Sifat Minyak Pirolisis dan Uji Performasi. Skripsi. Universitas Negeri Semarang, Semarang.
Sarker, M., Kabir A., Rashid, M.M., Molla, M., Mohammad, M., 2012. Waste polyethylene terephthalate (PETE-1) conversion into liquid fuel.Fundamentals of Renewable Energy and Applications, 10: 101-143
Subramanian, P., 2000.Plastic recycling and waste management in the US.Resour
Scott, D.S., Czernik, S.R., Piskorz, J., Radlein, 2000. Fast pyrolysis of plastic wastes. Energy Fuels, 4:407-11
Siddiqui, M. N., and Redhwi, H. H., 2009. Pyrolysis of mixed plastic for the recovery of useful products. Fuel Processing Technology. 90:545-552
Suastawa, I. N., Hermawan, dan Sembiring, A., 2000. Konstruksi dan Pengukuran Kinerja Traktor Pertanian. Tesis. Teknik Pertanian Institut Pertanian Bogor, Bogor.
Supriyono, 2011. Akuntansi Biaya, Pengumpulan dan Penentuan Harga Pokok. BPFE, Yogyakarta.
Triana, N.W. dan Rochimoellah,M., 2002. Model Kinetika Reaksi Heterogen pada Pirolisis. Prosiding Rekayasa Kimia dan Proses, UNDIP.
USU , 2011. Jenis - Jenis Polimer.
repository.usu.ac.id/bitstream/123456789/33671/3/Chapter%20II.pdf [21 Februari 2017 ]
Williams, P.T, Slaney, E., 2007. Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixtures. Resource Conservation Recycle, 51: 754-769 .
Wisudha, R. W., 2007. Prarancangan Pabrik Polypropylene dari propylene kapasitas 150.000 ton per tahun. Disertasi. Universitas Muhamaddiyah Surakarta.
63
