66 DAFTAR PUSTAKA
Abdelrahman, A. A. A., 2013, Geological Overview of White Silica Sands, Zagazig, Departemen of Geology Zagazig University.
Akrom, M., Marwot, P. and Sugianto, 2010, Pembuatan MMC Berbasis Teknologi Metalurgi Serbuk dengan Bahan Baku Alumunium dari Limbah Kaleng Minuman dan Aditif Abu Sekam Padi. Jurnal Pendidikan Fisika Indonesia, Volume 6, pp. 14-19.
Alyamani, A. & Lemine, O. M., 2012, FE-SEM characterization of some nanomaterial. London, InTech.
Amstead, B., Ostwald, P. and Begeman, L., 1985, Teknologi Mekanik, Jakarta, Erlangga.
Ariffin, K. S., 2004, What Is Silica?, Serawak, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral .
Badan Pusat Statistik, 2016, Statistik Pertambangan Bahan Galian Indonesia Tahun 2011-2015, Jakarta, Badan Pusat Statistik.
Bonanos, N., Pissis, P. and Macdonald, J. R., 2012, Impedance Spectroscopy of Dielectrics and Electronic Conductors, Characterization of Materials, John Wiley & Sons Inc.
Bondeson, D., 2007, Biopolymer-based nanocomposites, Processing and properties, Trondheim, Norwegian University of Science and Technology.
Bronto, S. and Hartono, U., 2006. Potensi Sumber Daya Geologi di Daerah Cekungan Bandaung dan Sekitarnya. Jurnal Geologi Indonesia, pp. 9-18.
Bunaciu, A. A., Udristioiu, E. G., and Enein, H. Y. A., 2015, X-Ray Diffraction, Instrumentation and Applications, Critical Reviews in Analytical Chemistry, Volume 45, pp. 289-299.
Choudhary, O. P. and Priyanka, 2017, Scanning Electron Microscope:
Advantages and Disadvantages in Imaging Components. International Journal of Current Microbiology and Applied Sciences, 6(5), pp. 1877-1882.
Cotton, F. A. and Wilkinson, G., 1989, Kimia Anorganik Dasar, Universitas Indonesia Press, Jakarta.
Darwis, D., Khaeroni, R., and Iqbal, 2017, Pemurnian dan Karakterisasi Silika Menggunakan Metode Purifikasi (Leaching) dengan Variasi Waktu Milling pada Pasir Kuarsa Desa Pasir Putih Kecamatan Pamona Selatan Kabupaten Poso, Journal of Science and Technology, VI(2), pp. 187-193.
Derlet, P. M., 2017, Sintering Theory, Paul Scherrer Institut, Villigen.
Duan, W., Yang, Z., Cai, D., Zhang, J., Niu, B., Jia, D., and Zhou, Y., 2020, Effect of sintering temperature on microstructure and mechanical properties of boron nitride whisker reinforced fused silica composites, Ceramics International, Issue 46, pp. 5132-5140.
Fayed, M. E. and Otten, L., 1997, Handbook of Powder Science and Technology 2nd Edition, Springer Science, Canada.
Ferawati, R. and Toifur, M., 2014, Penentuan Nilai Rugi Tangen (Loss Tangent) Kaldu Daging Sapi Berbantuan Software Logger Pro, Universitas Ahmad Dahlan, Yogyakarta.
German, R., 1984, Powder Metallurgy Science, Metal Powder Industries Federation, USA.
German, R., 1994, Powder Metallurgy Science, 2nd Edition, The Pennsylvania State University, Pennsylvania.
German, R. M., 2016, Sintering Science, German Materials Technology, California.
Giannini, C., Ladisa, M., Altamura, D., Siliqi, D., Sibillano, T., Caro, L.D., 2016, X-ray Diffraction: A Powerful Technique for the Multiple-Length-Scale Structural Analysis of Nanomaterials, Crystals, 6(87), pp. 1-22.
Goldstein, J.I., Newbury, D.E., Echlin, P. and Joy, D.C., 1992, Scanning Electron Microscopy and X-Ray Microanalysis, 2nd ed, Plenum Press, New York.
Graha, D. S., 2012, Pasir Kuarsa, Setia Graha, Banten.
Hadi, Munasir, S. and Triwikantoro, 2010, Sintesis Silika Berbasis Pasir Alam Bancar menggunakan Metode Kopresipitasi, Institut Teknologi Sepuluh Nopember, Surabaya.
Handoyo, H., 2009, Pembuatan Keramik dengan Metode Metalurgi Serbuk, Yogyakarta.
Han, Y.S., Li, J.B., and Wen, Z.H., 2003, The Effect of Sintering Temperature on Porous Silica Composite Strength, Journal of Porous Materials, Issue 10, pp. 41-45.
Hoganas PM School, 2015, Hoganas Handbook for Sintered Components, Hoganas PM School, Hoganas.
Jamaluddin, 2010. XRD (X-Ray Diffractions), Universitas Halu Oleo, Kendari.
Jonghe, L.C.D. and Rahaman, M.N., 2003, Sintering of Ceramics, Handbook of Advanced Ceramics. Barkeley: Elsevier, pp. 187-264.
Kementerian Keuangan, 2019, https://databoks.katadata.co.id, online accessed on 12 Mar. 1995.
Khondker, A. and Lakhani, S., 2015, X-Ray Diffraction: A Comprehensive Explanation for Multipurpose Research. International Journal of Interdisciplinary Research and Innovations, 3(1), pp. 60-64.
McMahon, G., 2007, Analytical Instrumentation: A Guide to Laboratory, Portable and Miniaturized IChichesternstruments, 1st penyunt, Wiley, Chichester.
Mohammadi, H., Nilforoushan, M.R. and Tayebi, M., 2020, Effect of Nanosilica Addition on Bioactivity and in Vivo Properties of Calcium Aluminate Cement, Ceramic International, pp. 4335-4343.
Mohammed, A. and Abdullah, A., 2018, Scanning Electron Microscopy (SEM), Băile Govora, College of Engineering University of Sulaimani, pp. 1-9.
Nayak, J. P. and Bera, J., 2010, Effect of sintering temperature on mechanical behaviour and bioactivity of sol–gel synthesized bioglass-ceramics using rice husk ash as a silica source, Applied Surface Science, Issue 257, pp. 458- 462.
Nuyah and Rahmaniar, 2016, Pemanfaatan Pasir Kuarsa Sebagai Bahan Pengisi dalam Pembuatan Karpet Karet. Dinamika Penelitian Industri, pp. 132-138.
Praditya, I.I., 2014, Indonesia Punya Kekayaan SDA Hingga Rp 200 Ribu Triliun, https://www.liputan6.com, online accessed on 15 Mar. 2020
Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral, 2012, USM, http://eprints.usm.my, online accessed on 10 Mar. 2020.
Rahayu, D.I.,2018, Studi Pengaruh Konsentrasi Zn Terhadap Sifat Dielektrik Nanopartikel Magnetik ZnNiFeO, Universitas Gadjah Mada, Yogyakarta.
Sant’Anna, C., Campanati, L., Gadelha, C., Lourenco, D., Labati-Terra, L., Bittencourt, S,J., Benchimol, M., Cunha-e-Silva, N.L., and De Souza, W., 2005, Improvement on the Visualization of Cytoskeletal Structures of Protozoan Parasites using High-Resolution Field Emission Scanning Electron Microsopy (FESEM), Histochemistry and Cell Biology, 124(1), pp. 87-95.
Setiabudi, A., Hardian, R. and Mudzakir, A., 201,. Karakterisasi Material Prinsip dan Aplikasinya dalam Penelitian Kimia, UPI Press, Bandung.
Setiyawan, W., 2014, Laporan Inventarisasi Mineral Bukan Logam Di Kabupaten Poso Dan Kabupaten Parigi Moutong, Provinsi Sulawesi Tengah, Pusat Sumber Daya Geologi, Bandung.
Shabana, N., 2010, Cement Industry, Doha: Qatar National Cement COmpany.
Smallman, R. E. and Bishop, R. E., 1999, Modern Physical Metallurgy and Materials Engineering, 6th, Hill International Book Company, New York.
Smallman, R.E. and Ngan, A., 2014, Modern Physical Metallurgy, 8th.
Elsevier Butterworth Heinemann, Oxford.
Smyth, C.P., 1955, Dielectric Behavior and Structure, Dielectric Constant and Loss, Dipole Moment and Molecular Structure, McGraw-Hill Book Company, New York.
Stewart, D.B. and Simmons, W.B., 2018, Silica Mineral, http://www.britannica.com, online accessed on 18 Mar. 2020.
Subekti, D., 2011, Analisa Sifat Fisik, SIfat Mekanik, Strukter Produk Proses Indirect Pressureless SIntering Berbahan Serbuk Ni dan Sifat Termal Berbahan Serbuk Cu dengan Supporting Powder Besi Cor, Universitas Dipenogoro, Semarang.
Sumarno, T.P.N., Januarty, M. & Yuniarti, Y., 2015, Pemurnian Pasir Silika dengan Metode Leaching Asam dan bantuan Sonikasi, UPN “Veteran” Yogyakarta, pp. 1-8.
Tian, Q. J., 2011, Study on the Working Performances of Large Tumbling Ball Mill Based on the Discrete Element Method, Jilin University, Jilin.
Umbar, T., 2013, Pembuatan Keramik Alumina dengan Menggunakan Metode Metalurgi Serbuk dengan Variasi Temperatur dan Komposisi, STTN- Batan, Serpong.
Vlack, L. H., 1991, Ilmu dan Teknologi Bahan, Erlangga, Jakarta.
Callister Jr, W.D., 2007, Materials Science and Engineering, Quebecor Versailles, New York.
Yin, Z., Peng, Y., Yu, Z., and Li, T., 2017, Impact Load Behavior between Different Charge and Lifter in a Laboratory-Scale Mill, Materials, 10(882), pp. 1- 17.
Zhou, W., Apkarian, R. P., Wang, Z. L., and Joy, D., 2006, Scanning Microscopy for Nanotechnology, Springer, New York.
