This booklet may be obtained from any department office in the College of Engineering and Technology and the Office of the Dean, Engineering and Technology 1211, 799 W. Specific requirements for admission to programs in the College of Engineering and Technology are discussed elsewhere in this bulletin.
Graduate Admission
Academic Advising and Counseling
Academic Regulations
Grades and Grade Reports
Basis of Grades
Withdrawing from Classes
Pass/Fail Option
Good Standing
Scholastic Indexes
Part-time students are automatically on academic probation when either the cumulative semester index or grade point average for the last 12 credit hours of consecutive L~ enrollment is below 2.0 (C). Part-time students are subject to dismissal when their cumulative semester index or grade point average for the last 18 credit hours of consecutive enrollment is below 2.0 (C).
Scholarships and Awards
Under this policy, only the grade of F can be replaced by the next passing grade in the cumulative semester index. This award is presented by the school to a graduate of the School of Engineering and Technology in recognition of outstanding achievement in engineering or technology, in the practice of the profession or in service to the community.
Scholastic Recognition
This award was established in 1991 in honor of its first recipient, Lucille Payton, administrative assistant to the dean. The award recognizes and rewards staff members for their outstanding dedication and service to the students, faculty, and staff of the School of Engineering and.
Dean's List
Graduation with Distinction
Graduation Requirements
Expenses and Financial Aid
University Fees
Late Enrollment and Late Program Change Fees
Residency Status
Special Examination Fees
Auditing Fees
Payment Procedures
Refunds
Financial Aid
To obtain a merit scholarship, students must submit an application to the IUPUI Office of Scholarships and Financial Aid by March 1. Students who have been admitted to IUPUI can apply through the Office of Scholarships and Financial Aid.
Campus Resources and Student Services
Adaptive Educational Services (Formerly Disabled Student Services)
Audiovisual Facilities
Campus Housing
Career and Employment Services
This guide is available in Engineering and Technology 1021 and contains information about the following services. Quick Docs, free handouts on the basics of technology, are available in the General Counseling Office in Engineering and Technology 1030.
Office of International Affairs
Libraries
Military Officer Training
Office of Multicultural Student Affairs
The mission of the Office of Multicultural Affairs is to maximize the educational and cultural experiences of all students and to ensure that students from underrepresented groups within the student population are fully integrated into the fabric of the university. Minority students enrolled in the School of Engineering and Technology may receive additional services through the school's Minority Engineering Advancement Program (MEAP), described in the section titled "Special Resources of the School of Engineering and Technology" in this newsletter .
Parking Facilities and Privileges
Placement Testing Program
University Writing Center
Special Resources of the School of Engineering and Technology
Computer Network Center (CNC)
Computational Biomechanics Laboratory
Computational Fluid Dynamics Laboratory
Electronics Manufacturing Productivity Facility (EMPF)
Students can earn academic credit toward the baccalaureate degree by participating in the co-op program. For further information about the co-op program, call or write the Office of Student Affairs, School of Engineering and Technology, 799 W.
Minority Engineering Advancement Program (MEAP)
Students enrolled in the co-op program attend classes full-time and work full-time in alternating semesters. Departments require students to successfully complete at least three co-op work sessions to receive academic credit.
Summer Internships in the Federal Republic of Germany
Undergraduate Engineering Programs
Admission Requirements
Undergraduate Engineering Curriculum
General Education Program
Substitution of courses required for graduation may be made by the Dean of the School. A copy of the approval must be filed in the office of the Engineer and Technology Recorder.
Department of Electrical Engineering
Department of Mechanical Engineering
Students collaborate with their faculty advisors in the development of a personal study plan leading to the Bachelor of Science in Engineering (B.s.E.) degree with interdisciplinarity. The Department of Mechanical Engineering has prepared study plans with such major educational areas as bioengineering and engineering management. The School of Engineering and Technology and the Indiana University School of Business offer a joint program in engineering management.
Graduate Engineering Programs
Admission Policies and Procedures
Graduating grade point average (GPA) of at least 3.00 (on a scale of 4.(0) or equivalent from a baccalaureate degree program with a strong emphasis in engineering, mathematics or the physical sciences. Completion of the following undergraduate EE courses (total of 25 semester credit hours) or equivalent (course numbers are for courses offered at IUPUI) Equivalence of courses must be determined by the Graduate Committee of the Department of Electrical Engineering.
Admission as a Regular Graduate Student
The student must maintain a cumulative grade point average of 3.00 (on a 4.00 scale) or higher in the subjects listed in items 2 and 3 above.
No course in which a grade of less than B is received will be accepted as part of a plan of study if the course is taken under enrollment as a temporary graduate student. Please note that the limitation of 12 credit hours earned in provisional graduate student status that can be used in a plan of study will be modified if excess undergraduate credits are also applied to the plan of study. Students interested in temporary graduate student classification, also referred to as non-degree graduate enrollment, should contact the IUPUI Graduate Office, wnion Building A203, 620 Union Drive, IUPUl, Indianapolis, IN phone.
Undergraduate and Transfer Credit
In addition, credit earned in courses taken while .admission is pending may be applied to the advanced degree only if those courses are appropriate for the program and acceptable to both the School of Engineering and Technology and the Graduate School.
General Degree Requirements
The formal plan of study must be submitted as soon as possible thereafter, but before the completion of 15 credit hours toward graduation. The plan of study must be approved by the advisory committee and the graduate school. Only grades of A, B, or C are acceptable in fulfillment of the Graduate School requirements for any plan of study.
Master of Science in Electrical Engineering
Students may select one of the primary areas and choose related area courses from the other primary area courses or related area courses, or both.
Master of Science in Mechanical Engineering
Master of Science in Engineering
Master of Science
Master of Science in Industrial Engineering
Engineering Course Descriptions
Technology Programs
When it becomes necessary to limit the number of Indiana residents accepted for a specific program, students will be offered admission to an alternative program or admission to the desired program for a subsequent semester.
Associate in Applied Science
Bachelor of Science
Department of Manufacturing Technology Department of Computer Technology Department of Construction Technology Department of Electrical Engineering.
Associate Degree
Baccalaureate Degree
Registration in the School of Engineering and Technology, either in residence or in absentia, during the semester or summer session immediately preceding the award of the degree. Students may take a maximum of 9 of the 20 credit hours in another approved college or university, provided the courses are approved in advance and in writing by an authorized representative of the dean of the School of Engineering and Technology. Credit in these additional courses must be established within five years of the date all other degree requirements have been met.
Technology Plans of Study
Department of Computer Technology
Associate in Applied Science-Computer Technology (Commercial Option)
Completion of the Associate in Applied Science degree in computer technology or an equivalent degree. The additional courses are free electives, except that no more than 9 credit hours may be taken in the Department of Computer Technology (CPT). Students must complete the Associate in Applied Science degree in computer technology (commercial option) or an equivalent degree.
Department of Construction Technology
Students in this program develop their knowledge of the principles and practice of construction through further technical work. Also included are additional coursework in business and management, as well as wTitten and oral communication training. Many students complete part-time coursework by taking on a lighter workload during semesters when they are employed in the construction industry.
Department of Electrical Engineering Technology
EET 205 Introduction to Microprocessors ..4 EET 212 Electricity and Machinery ...4 EET 302 Introduction to Control Systems ...4 MET 157 Electrical and Electronic Design. Students earning an Associate of Applied Science degree in electrical engineering technology or biomedical electronics technology are eligible to enter this Bachelor of Science degree program. The program offers additional studies in electrical engineering technology, as well as related technical and non-technical fields, essential in modern industry.
Minor in Electrical Engineering Technology
Practical Industrial Electronics (PIE) Program
Department of Manufacturing Technology
Graduates from associate degrees in mechanical engineering technology are eligible for certification as associate engineering technologists. In addition, successful completion of this program automatically qualifies a student for admission to the bachelor's program in mechanical engineering. Upon successful completion of the program, the student may continue to work toward the Associate in Applied Science degree in Mechanical Drafting Design Technology.
Manufacturing Systems Certificate Program
Department of Supervision
17 credit hours in mathematics and the physical or biological sciences, including MATH 153-154 or MATH 118-119 or above. 18 credit hours in communications, including ENG W131 and COMM cno; the balance should consist of speaking and writing courses. 12 credit hours in behavioral science, selected from anthropology, psychology, and sociology;. at least three hours must be at the 300 level or higher.
Human Resource Management Certificate Program
Technology Course Descriptions
CET 499 Civil Engineering (1-4 cr.) Hours, topic, and credits in consultation with staff. CIMT 198 Industrial Practice I (1-5 cr.) P: Second semester standing, prior acceptance into the cooperative program, and approval of the cooperative advisor. CPT 198 Data Processing Practice I (1-5 cr.) P: Sophomore standing, prior acceptance into the cooperative program, and permission of the faculty cooperative advisor.
Electrical Engineering Technology (EET)
MET 198 Industrial Internship I (1-5 cr.) P: Second semester standing, prior admission to co-op program and consent of faculty co-op advisor. A study of the development, transmission and application of power through liquid power circuits and controllers. SPY 362 Cooperative Occupational Internship (1-5 cr.) P: Sophomore status, prior admission to cooperative program, and consent of faculty cooperative advisor.
Other Courses
CHEM ClOl Elementary Chemistry I (5 cl., 3 cr. no lab) P: At least one semester of high school algebra. CHEM Cl05 Principles of Chemistry I (5 cr., lecture, recitation, lab) P: Two years of high school algebra, one year of high school chemistry. CHEM CllI Chemical Sciences I (4 cr., lecture, recitation) P: Two years of high school algebra, one year of high school chemistry.
Computer Science (cSCI)
MATH 163 Integrated Calculus and Analytical Geometry I (5 cr.) P: MATH 151 or equivalent, and one year of geometry. PHIL P110 Current introduction to philosophy (3 cr.) An introduction to philosophy through an examination of several important philosophical issues. PSY B366 Introduction to organizational psychology in business and industry (3 cr.l The study of organizational psychology applied to business and industry.
Resident Faculty
Peale, Robert E., professor of mechanical engineering and chairman of the Department of Manufacturing Technology (1963); Pfile, Richard E., associate professor of Electrical Engineering and chair of the Department of Electrical Engineering (1983); B.S. Renda, R. Bruce, Dean Emeritus of the School of Engineering and Technology and Professor of Electrical and Mechanical Engineering (1974); B.S.
Index
Manufacturing Systems Certification Program, 73 Manufacturing Technology, Department of, 68 Master's Degree Programs, 36 Mechanical Engineering, Department of, 31 Military Training, 17.
Key to Course Codes
