6) 새로운 기지 및 부두의 건설을 고려한다면 W/P의 규격조정 및 Sub B/D 의 위치 및 디자인 변경으로 대형선박에서 소형선박을 함께 이용할 수 있는 부두의 건설이 가능하다. 즉, W/P의 길이 단축과 계류선에서 후퇴한 배치, Sub B/D의 높이 축소로 대형선을 위한 B/D 간격 내에 소형선을 위한 Sub B/D 를 반영하여 B/D을 선석당 4기(혹은 2 big B/D)로 접안돌핀을 배치하여 부두 건설목적에 따라 조정할 수 있다.
참고 문헌
국립해양조사원, 여수항 및 여수해만 조류도, Pub. No.621-2.
국립해양조사원, 조석표, Pub. No.1202-1.
국토해양부, 제3차 전국무역항 기본계획보고서 (13권 여수항, 14권 광양항).
대영엔지니어링(2000), LG-Caltex정유 주식회사 인천북항 유류 하역시설(돌핀 축조공사 실시설계보고서.
도화종합기술공사(2006), S-Oil(주) 제3돌핀식 부두 건설사업 실시계획설계보 고서.
한국석유공사(2001), 동해-1 가스생산시설공사 실시설계보고서,
삼성토탈주식회사(2012), STC#2 접안시설 축조공사 기본 및 실시설계보고서.
에스오일주식회사(2006), S-Oil(주) 제3돌핀식 부두 건설사업에 따른 사전재 해영향성검토 협의요청서.
에스케이주식회사(2003), 인천(항동) 물류센타 돌핀증대 설계용역 타당성검토 보고서.
에스케이주식회사(2010), SK 3부두 부두능력증대공사 실시설계보고서.
조양화학공업주식회사(2000), 조양화학 폐기물 수송선 돌핀 접안시설공사 설계서.
홍보산업주식회사(2004), 인천북항 폐기물 운반선 접안시설(돌핀식) 실시설계서.
한화에너지주식회사(1997), 한화유류 출하부두 기본 및 실시설계보고서.
해양수산부(1999), 항만 및 어항 설계기준 (상,하).
해양수산부(2005), 항만 시설물 설계 기준서 (상,하).
鞠谷宏士,岩井 聽 (1972),超大型ドルフィン係留模型實驗(第2報), 日本航海學 會論文集 47号, pp.53~61.
谷本勝利,小船浩治,北谷高雄,高橋重雄,山本壓一,小松和彦,轟 正彦 (1973), 抗 式シーバースの波力の問題, 港灣技術硏究所講演會講演集, pp.1~45.
日本港灣協會(1999), 港灣の施設の技術上の基準·同解說.
日本全局漁港協會(1999), 漁港の技術指針(上,下).
日本土木學會(2000), 日本 海岸施設 設計便覽.
Agerschou, H. and Lungdren, H.(1983), Planning and Design of Ports and marine Ternimals, John Wiley & Sons Ltd.
BSI (1994), BS Code for Maritime Structures, Part 4.
BSI (1994), British Standard 6349-4 Code of Practice for design of fendering and mooring systems.
California State Lands Commission, Marine Oil Terminal engineering and Maintenance Standards, Marine Facility Division
Carl AA. Thoresen, Port Design Guidlines and Recommendations Clackson (2011), Oil&Tanker Trades Outlook.
Clarkson (2012), World Fleet Register CD
Costa, F. V. (1973), "Dynamics of Berthing Impacts," Papers Presented at NATO Advanced Study Institute on Analytical Treatment of Problems in the Berthing and Mooring of Ships, Wallingford, England, pp. 1-26.
Gregory P. Tsinker, Handbook of Port and harbor engineering Handbook of Port and Harbor Engineering (Tsinker, G. P.) Heidenreich Innovations (2012), Q88.Com
HDEC(2010), NSRP Complex Project - Marine Works Technical Proposal, Vietnam.
OCIMF (2009), "Mooring Equipment Guidelines", 3rd Ed., London, England.
OCIMF (1977), "Prediction of Wind and Current Loads on VLCCs," London, England.
PIANC Bulletin and Technical Report
Piaseckyj, P. J.(1977), "State of the Art of Fender Design," 24th International Navigation Congress.
Port Design Guidelines and Recommendations (Thoresen, C. A.) SMH(2006), New Refinery Project(NRP) for KNPC ast Al-Zour, Kuwait.
Technical Standards and commentaries for Port and Harbour Facilities in Japan
Tension Technology Internatinal(2005), Develop Effective Moorings for Tanker and Gas Carrier Terminals Exposed to Waves, Joint Industry Project Proposal from TTI, Sussex, UK.
Thoresen, C.A.(1988), Port Design Guidelines and Recommendations, Tapir Publishers, Norway.
Transport Canada (1977), TERMPOL Code; Transport Canada mooring guidelines and codes for oil terminals.
Transport Canada (2001), TERMPOL Review Process (TRP) for Marine Terminals. (TP 743 E) Appendix 3 Berth, Mooring and Fendering.
U.S. ARMY CORPS OF ENGINEERS (2007), Al Basrah Oil Treatment Basrah, Iraq, SPECIAL INSPECTOR GENERAL FOR IRAQ RECONSTRUCTION
US CERC (1984), Shore Protection Manual & Technical Manual.
US Department of Defense(1999), "Mooring Design," Handbook, MIL-HDBK-1026/4A, Alexandria, VA, USA.
US Navy (1984),Harbors Design Manual 26.1 (NAVFAC DM26.1), 1. Harbors, Department of Navy.
US Navy (1986), Design Manual 26.4 (NAVFAC DM26.4), 5. Fixed Moorings, Department of Navy.
California State Lands Commission (2002), "Marine Oil Terminal Engineering and Maintenance Standards”(MOTEMS).