• Tidak ada hasil yang ditemukan

isprsarchives XL 5 W2 13 2013

N/A
N/A
Protected

Academic year: 2017

Membagikan "isprsarchives XL 5 W2 13 2013"

Copied!
6
0
0

Teks penuh

Loading

Gambar

Figure 1: Restoration of Niderviller’s tunnel masonry in 2009.
Figure 2: Rendering of the reference model of the tunnel.
Figure 5: Setting up electronic and optical parameters in lab, us-ing a rotating disk under artificial illumination.
Figure 6: Automatic simplified visual odometry configuration.Solid lines: stereo rig at time t
+3

Referensi

Dokumen terkait

For the second approach, Close Range images have been taken from above (from building roof) with digital camera Samsung ES10 (resolution – 8 mega-pixels, focal length – 6

The SMAP Camera System International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XL-1/W2, 20134. UAV-g2013, 4 – 6 September 2013,

Currently a camera system with four oblique and one nadir looking cameras is under development at the Chair for Geodesy and Geoinformatics (Figure 1).. The so-called

Figure 1: Platform Twinstar Multiplex (top) and Canon Ixus 100 camera with fixed lens element (bottom). Similar to other cameras, the Canon IXUS 100 IS features

International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XL-1/W2, 2013 UAV-g2013, 4 – 6 September 2013, Rostock, Germany... The camera

Indeed, using cameras equipped with a rolling shutter on a mobile platform can lead to aberrations (the upper pixels being recorded before the lower ones). Flying

The control and stabilization of the position and altitude of the UAV and of the sensor (camera, laser scanner, etc.) are performed by means of MEMS gyroscopes and accelerometers

The upper limit e max ω of exposure time with respect to angular velocities can be computed from the measured angular velocity limits and the camera calibration data. Therefore, we