%TOC Removal
Oxidant/pollutant ratio pH
100
90
80
70
60 5 3
7 9 11 0.5
1.0 1.5
Optimization of Oxytetracycline Degradation Inside UV/H2O2 Reactor Using Box-Behnken Experimental Design
Bebas
0
0
0
Teks penuh
(5)(6)
Dokumen terkait
Consequently, a study on the degradation process of MDEA using UV/H 2 O 2 that may possible as pre-treatment of the MDEA waste before biological oxidation was conducted in
Hydroxyl radical rate constants of MDEA mineralization at different temperatures by using UV/H 2 O 2 in aqueous solution were also estimated.. The rate constants
This research Design Mix Optimization Of Heavy Concrete Coating Process At PT XYZ By Response Surface Methodology Box-Behnken Design. RSM with mixture experiment is used
Parameter Optimization for Pulp from Rice Straw and used Paper with a Box-Behnken Design Mirna Rahmah Lubis*, Lia Mairiza, Aisyah Protonia Tanjung and Nadia Yunisa Fahmi Department
All together the total tendency of polymer to water absorption and the ratio of patch swelling as well as polymer viscosity will identify the fate of drug release.57 So the higher
CONCLUSION The adsorption of Cu II ions by the eugenol- silica gel composite using the box Behnken method can determine the optimum conditions in the response optimizer design in
The independent variables investigated encompassed pectin concentration ranging from 0 to 1%, pH ranging from 6 to 8, and drying time ranging from 2 to 6 hours, The measured responses
9: Effect of Reusability of Acid-modified Smectite Clay Catalyst on the %Conversion Catalyst Amount 5.03 wt%, Methanol to WCO Molar Ratio 22.38, and Reaction Time 3.01 h... Catalyst
