DAFTAR PUSTAKA
Al-Malaika, S., and G. Scot, 1983, “In Degradation and Stabilisation of Poly olefins “ App. Sci. Pulp, Ltd. London.
Al-Malaika, S. 1997, “Reaktive Antioxidants for Polymer”, in Reactive Modifiers For Polymer, Al-Malaika,S., 1st ed., Blackie Academicac and Professional, London.
Aries Himawanto. D, 2007,”Karakteristik Panel Akustik Sampah Kota Pada Frekwensi Rendah dan Frekwensi Tinggi Akibat Variasi Kadar Bahan Anorganik”. J. Teknik Gelegar. Vol. 18. No. 01: 19-24.
lppm.UMS.Ac.id/datas…/Gelegar.
Awang. M, H. Ismail., M.A Hazizan, 2008, “ Processing and properties of Polypro pylene-latex modified waste tyre dust blends (PP/WTDML)”, J. Polymer
Testing. 27 :93-99.
Awang. M, H. Ismail, 2008, “ Preparation and characterization of polypropylene/waste tyre dust blends with addition of DCP and HVA-2 (PP/WTDP-HVA2) “. J. Polymer Testing 27: 321-329.
Bahl. A, 2000, “A Textbook of Organic Chemistry” New Delhi: S Chand & Company LTD.
Bahruddin, Sumarno, G.Wibawa, Sowarno. 2007, ”Morfologi dan Properti Campu ran Karet Alam/Polipropilene yang Divulkanisasi Dinamik Dalam Inter nal Mixer” J. Reaktor. Vol 11. (2):71-77.
Bahruddin, Ida Zahrina, Said Zul Amraini, 2009,”Pengaruh filler Carbon Black Terhadap Sifat Dan Morfologi Komposit Natural Rubber/Polipropilene” Seminar Nasional Teknik Kimia Indonesia-SNTKI 2009. Bandung, 19-20 Oktober 2009. ISBN 978-979-98300-1-2.
Bhatnagar,Dr. 2004,”A Textbook of Polymer [Chemistry and Tecknology of Polymer] : (Processing and application). Volume II. New Delhi: S Chand & Company LTD.
Bill Meyer, W.F., 1984, “Text Book Of Polimer Sciense”, 3rd ed, Jhon Willey & Sons, New York.
Brown, S.B., 1992, “Startehis for Compatibilization of Imiscible Polymer Blends”, Proceeding of 34 th, IUPAC International Symposium on Macromolekuler, Prague, 13 – 18 july.
Casale, A., Porter, R.S. 1979, “Polymer Stress Reaction”, Academic Press, London.
Chen Qin, Nattakan Soykeabkaew, Ni Xiuyuan, Ton Peijs., 2008, “The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites” J. Carbohidrate Polymer, 71: 458-467.
Christina E., Mediastika, 2007,”Potensi Jerami Padi Sebagai Bahan Baku Panel Akustik” J. Dimensi Teknik Arsitektur. Vol. 25, No. 2:183-189.
Dikland H G., Van Der Does, L. and Bantjes A., 1992.”FT-IR Spectroscopy, A Mayor Tool For the Analysis of Peroxide Vulcanisation Processes in the Precence of Coagents. I. Mechanism of EPM Peroxide Vulcanisation with Aromatic Bis (Allyl) Ester as Coagent”, Rubb. Chem. Tech. 66, 196-213.
Doelle Leslie, L,. 1972,”Environmental Acoustics” Mc Graw-Hill, New York.
Doelle, L.L,.1993,”Akustik Lingkungan” (terjemahan Lea Prasetyo), Jakarta. Erlangga.
Ebewele, R.O. 1996.,’ Polymer Science and Technology’. New york: CRC press.
Fellahi, S., B.D. Favis dan B. Fisa, 1995, “Tensile Dilatometry of Injection Moulded HOPE/PA6 Blends”, J. Material Sci, 30,5522.
Fessenden, R J.,Fessenden, J S.1984, ”Kimia Organik Jilid 2” Edisi Kedua. Jakarta : Erlangga.
Fried, R.J., 1995, “ Polymer Science and Technology”, New York. Prentice Hall Press.
G.Reethof, L.D. Frank, O. H. McDaniel., 1976,” Absortion of Sound by Tree Bark” USDA Forest Service Research Paper NE-341, U.S.
Giancoli, D. C. 2001. “Fisika Dasar”. Edisi V. Jilid 2. Jakarta : Erlangga
Hasan.A,1996.,”Penggunaan Karet Alam dan Paduan Karet Alam Dengan Karet Sintetik Untuk Anti Vibrasi Pada Kenderaan Bermotor” Tesis, Program studi Material Science, Program Pasca Sarjana Universitas Indonesia.
Halimatuddahlianana 2007.,’ The effect of N,N-m- Phenylenebismaleamide (HVA- 2) addition on properties of Polypropylene (PP)/Ethylene-Propylene Diene
Terpolymer (EPDM)/Natural Rubber (NR) vulcanized blends” J. Teknologi Proses 6(1):52-58.
Halimatuddahliana, Indra Surya, Maulida. 2008., ‘Modifikasi Bahan Elastomer Termoplastik Polipropilene/Karet Alam (PP/NR) Dengan Proses Pemvulkanisasian Dinamik.’ Jurnal Penelitian Rekayasa, Vol 1. No.2.
Han-Seung Yang, Dae-Jun Kim, Young-Kyu Lee, Hyun-Joong Kim, Jin-Yong Jeon, Chun-Won Kang, 2004, ”Possibility of using waste tire composites reinforced with rice straw as construction materials” J. BIORESOURCE TECHNOLOGY. 95: 61-65.
Hong Z, Li Bo, Guangsu H, Jia H, 2007, “A novel composite sound absorber with recycled rubber particles” Journal of Sound and Vibration 304;400-406.
Hornsby, P.R., C.L, Watson., 1995, “ Interfacial Modification of Polypropilene Composites Filled with Magnesium Hydroxide”, J. Material Sci 30, 5347.
Hosseini Fouladi. M, Mohd Jailani Mohd Nor, Md. Uyub, Zulkarnaen Ali Leman, 2010,”Utilation of coir fiber in multilayer acoustic absorption panel” , J.Applied Acoustics 71: 241-249.
Hull, D., 1992,” An Introduction to Composite Material” Cambridge University Press, London.
Hummel, D.O., 1985,” Infra Red Spectra Polymer in The Medium and Long Wavelength Region”, Chapter 3, John Willey and Sons, London.
Ismail H. Nizam J.M, H.P.S, Khalil A, 2001,’ The effect of a compatibilizer on the mechanical properties and mass swell of white rice husk ash filled natural rubber/LLDPE blend. J. Polymer Testing 20 :125-133.
Ismail H. Edyham MR. Wirjosentono B,2002, “Bambo fibre filled natural rubber composite; the effects of filler loading and bonding agent” J. Polymer Testing 21:139-144.
Ismail H, Nasaruddin M.N, Rozman H.D, 1999,” The effect of multifunction additive in white rice husk ash filled natural rubber compounds’ European Polymer Juornal 35 (1999) 1429-1437.
Ismail H. Jafri R.M, 1999”Physico-mechanical properties of oil palm wood flour filled natural rubber composites” J. Polymer Testing 18:381-388.
Ismail H. Rozman HD. Jafri RM. Mohd Ishak ZA, 1997,”Oil palm wood flour reinforced epoxidized natural rubber composite: The effect of filler content and size” Eur. Polym. J. Vol.33, No 10-12, pp. 1627-1632.
James, L Withe. 1975.’ Thermoplastic and Rubber Compounds: Technology and Physical Chemistry’. Canada. Hanser Publishers.
Kiatkam Jornwong S, Along Kornchongtikul, P, Prasassarakich, 1996, “Mechanical Properties of Glass Fiber Reinforced PVC/SAN Composites” Polimer Prosessing Towards, The Polymer Processing Socyety, Saia/Australia Regional Meting, Singapura.
Klason. C, J. Kubat, P. Gathenholm, 1988,”New Wood-Based Composites With Thermoplastics”, Proceding at the Nesshinbo International Conference on Cellulosics Utilization in the near future. Tokyo. Jepang.
K. Chan and M. Forasyth, 2000, “Processing and morphological development of carbon black filled conducting blends using 2 binary host of poly (stryrene co-acrylonitrile) and poly(srtyrene)”, J. of polymer science, 38(4) : 2666-2660.
Khuriati. A, Eko Komaruddin, M. Nur, 2006, “Disain Peredam Suara Berbahan Dasar Sabut Kelapa dan Pengukuran Koefisien Penyerapan Bunyinya” J. Berkala Fisika. Vol.9, No.1, hal:15-25.
Krishna, S.Bhuana, 2009,” Teknologi Karet” Sekolah Pasca Sarjana, Program Studi Kimia, USU. Medan
Kroschwitz, J. L. 1990.” Encyclopedia of Polymer Science and Engineering”. USA. Jhon Wiley & Sons Inc.
Lewis, H.B and Dougals, H.B, 1993.” Industrial Noise Control Fundamentals and Aplications”. New York
Masykuri. M, Sulistyo Saputro, Mamiek Subelo., 2005,”Aplikasi Dicumil peroksida Dalam Proses Crosslinking dan Pengaruhnya Terhadap Sifat Mekanik Komposit Polimer Polipropilene-Karet alam”. J. ITENAS. No.4, Vol. 8.
File:///C:/Users/Acer/Documents/M.Masykuri.htm.
Mathew, A. P., Packirisamy, S., Thomas, S. 2001,” Studies on the Thermal Stability of Natural Rubber/Polystyrene Interpenetrating Polymer Networks: Thermogravimetric Analysis”. J. Polymer Degradation and Stability. 72: 423-439.
McMulan, R. 2002,” Enveromental Science in Building” 5 th Edition, Palgrave. New York. USA.
Mediastika, C.E. 2009.” Material Akustik Pengendali Kualitas Bunyi Pada Bangu nan”. ANDI: Jogjakarta.
Methew, N.M and A.J.Tinker, 1986,”Impact-resistant polypropylene/natural rubber blends” J. Nat. Rubber Res. 1(4): 240-246.
Morton, M. 1987. “Rubber technology”. Van Nonstrand Reinhold Co. New York.
Muhammad, N.H, and Abdullah, I.2003,”Adunan Getah asli/Polistirena (NR/PS) Bersama HVA-2 sebagai agent Taut Silangan” Pertanika J,Sci & Technol.11(1):17-29
Nakason. C, Anuat worlee., Shuban Shaleh., 2008,”Effect of vulcanization systems on properties and recyclability on dynamically cured epoxidazed natural rubber/polypropylene blends” J. Polymer Testing. 27: 858-869.
Nakason. C, Nuansomsri. K, Kaesaman.A, Kiatkamjornwong. S, 2006,”Dynamic vulcanization of natural rubber/high-densyity polyethylene blend: Effect ot compatibilization, blend ratio and curing system” J. Polymer Testing 25:782-796.
Naskar. K, Kokot. D, Noordermeer. J.W.M, 2004,”Influence of various Stabilizers on aging of dicumyl peroxide-cured polypropylene/ethylene-propylene-diene thermoplastic vulcanizates” J. Polymer Degradation and Stability. 85: 831- 839.
Ompusunggu, M., 1987, “ Pengawetan Bahan Olah Lateks Kebun”, Warta Perkaretan, Pusat Penelitian Perkebunan Sungai Putih. 6(2): 8-12.
Pechurai. W, Charoen Nakason, Kannika Sahakaro, 2008,”Thermoplastic natural rubber based on oil extended NR and HDPE blends: Blend compatibilizer, phase inversion composition and mechanical properties” J. Polymer Testing 27: 621-631.
Page, D.S., Soendoro, R., 1995,” Prinsip-prinsip Bio Kimia” Edisi Kedua , Erlangga, Jakarta.
Ramadhan A, dan Fathurrohman IM., 2013,”Pengaruh asam stearat terhadap karakterisasi Pematangan, Sifat Mekanik dan Swelling vulkanisat Karet alam dengan bahan Pengisi Organoclay” J. Sains Materi Indonesia. Vol.14. No.2 ,hal108-113.
Rosen, L., Stephen, 1982, “Fundamental Principles of Polymeric Materials” , John Wiley & Sons, New York, USA
Rabek, J.F and Ranlay, B., 1975, “Role of singlet oxygen in photooxidative degradation and photostabilisation of polymer”. Eng& Sci, 15 (1) :17-23.
Ruksakulpiwat. Y, Jatuporn Sridee, Nitinat Suppakarn, Wimonlak Sutapun, 2009, “Improvement of impact property of natural fiber-polypropilene compo site by using natural rubber and EPDM rubber” J. Composit : Part B. 40 :619-622.
Satapathy. S, A. Nag, Golok Bihari Nando, 2010, ”Thermoplastic elastomers from waste polyethylene and reclaim rubber blends and their composites with fly ash” . J. IChemE. PSEP-118. No of pages 11.
Sae-Oui. P, Chakrit Sirishinha., Promsak Sa-nguantamarong.,2010,” Properties and Recyclability of Thermoplastic Elastomer Prepared from Natural Rubber Powder (NRP) and High Density Polyethylene (HDPE)” J. Polymer Testing, p:1-6.
Seok Oh. J, A.I. Isayev, M.A. Rogunova, 2003, “Continuous ultrasonic process for in situ compatibilization of polypropylene/natural rubber blends”, J. Polymer 44:2337-2349.
Severini, F. 1999, “Free Radical Grafting of Maleic Anhydride In Vapour Phase on Polypropylene Film”. Elsevier Science : Milan.
Sezgin Ersoy., Haluk Küćük., 2009,”Investigation of industrial tea-leaf-fibre waste material for its sound absorption properties” J. Applied Acoustics, 70: 215-220.
Shinoja, S. 2011,.’Oil palm fiber (OPF) and its composites’. Directorate of Oil Palm Research. Indian Council of Agricultural Research. Pedavegi. Eluru. Andhra Pradesh 534 450. India.
Sidik, M. 2003.,’ Kimia Polimer’. Jakarta : Pusat Penerbitan Universitas Terbuka.
Silverstein, R.M, Bassler, G.C, Morill, T.C, “ Spektrofotometric Identification of Organic Compounds” 4th Edition, John Willey and Sons, New York.
Siregar Hamzah, A, 1999,”Peranan Pendispersi Hidrokarbon dan Turunan Gliserida Minyak Sawit terhadap Kompatibilitas Pengisi Pulp Tandan Kosong Sawit Dalam Matrik Polipropilena” Tesis S-2. Program Pasca Sarjana USU, Medan.
Siregar Hamzah, A, 2010,”Pengaruh Penambahan Inisiator Dikumil Peroksida Dan Divinilbenzen Sebagai Crosslink Pada Kompatibilitas Rasio Campuran Polietilena Dan Karet Alam SIR 3L” Jurnal Kimia Mulawarman, November Vol 8, No 1.
Sjostrom, E., 1998, “ Kimia Kayu” Gajah Mada University Press, Yogyakarta.
Polipropilene, Ethylene Propylene Diene Terpolimer and White Rice Husk Ash: Temperature Dependence” J. Teknologi, 39(A). Keluaran Khas Dis: 11-22. Universiti Teknologi Malaysia.
Sperling, L.H., 1986, “Introduction to physical polymer chemistry”. John Wiley & Sons, New York, USA.
Steven, M.P. 2001.,” Kimia polimer”. Cetakan pertama. Jakarta: Pradnya Paramita.
Schwartz, M.M., 1983.,”Composite Material Handbook” McGraw Hill Book Company, New York.
Stude Baker, M.L, 1984, “ The Rubber Compound And Its Composition “ Science And Technology Of Rubber. Academic Press.
Surdia, T., dan Saito, S. 2005.’ Pengetahuan Bahan Teknik’. Jakarta. Pradya Pramita.
Thitithammawong. A, C.Nakason, K.Sahakaro, J.W.M.Noordermeer, 2007,” Thermo Plastic Vulcanizates Based on Epoxidized Natural rubber/Polypropilene Blends: Selection of Optimal Peroxide Type and Concentration in Relati on to Mixing Condition”. J. European Polymer. 43: 4008-4018.
Thitithammawong. A, C. Nakason, K. Sahakaro, J. Noordermeer,2007, ”Effect of dif ferent Types of Peroxides on Rheological, Mechanical, and Morphologi cal Properties of Thermoplastic Vulcanizates Based on Natural rubber / Polypropylene Blends”. J. Polymer Testing. 26 ; 537-546.
Uma.L.D, Bhagawan, S.S, Thomas. S, 2010,” Dynamic Mechanical Analysis of Pine apple / Glass Hybrid Fiber Reinforced Polyester” Composites. 31(6): 956-965.
Wirjosentono. B, A. N. Sitompul, Sumarno, T.A. Siregar, dan SB. Lubis, (1995), “Analisis dan Karakteristiik polymer”, USU Press Medan.
Wirjosentono, B. 1997, “Pembuatan poliblen Mampu terdegradasi menggunakan teknik pengolahan reaktif poliolepin dan serat limbah kosong sawit” FMIPA – USU, Medan.
Yanty Lubis. M, 2009,” Pembuatan Komposit Kayu Plastik Dari Serat Kayu Kelapa Sawit Dan Polipropilena Dengan Menggunakan Polipropilena Yang Dimodifikasi Dengan Asam Akrilat Sebagai Bahan Penghubung” Tesis Program Studi Kimia, Sekolah Pasca Sarjana, USU, Medan.
Youneung Lee, Changwhan Joo, 2003,”Sound Absortion Properties Of Recycled Polyester Fibrous Assembly Absorbers”, J. AUTEX Research, Vol, 3. No, 2, June @ AUTEX.
Young HD, Freedman OA. 2003. Fisika Universitas. Edisi Kesepuluh. Jilid 2. Alih Bahasa, Pantur Silaban; Editor, Amalia Safitri, Santika. Jakarta: Erlangga.
