isprs archives XLI B1 383 2016
Teks penuh
Gambar
Dokumen terkait
3.6.3 Semi-Global Dense Matching (SGM): The enhanced EOPs of each image are obtained from the bundle adjustment procedure using initial values acquired directly
Roof structure recognition is performed using topology graphs, which describe the topological relation between roof planes (Verma et al., 2006). Building graph
In (Molina et al., 2016), the first performance analysis of aerial image orientation and calibration in mapKITE for corridor mapping was performed, based on the
The objective of this paper is to evaluate the possibilities of using low-altitude photogrammetry for update of the cadastre data, specifically for measurements
According to the distribution characteristics of subway tunnel non-points, this paper has proposed a filtering method using ellipse cylinder model, which include
The workflow of airborne LiDAR point cloud data and synchronous digital image co-registration based on combined adjustment is shown in Figure. 1) Point cloud
3.2 Decimation of Tie Points for Large Bundle Blocks As the dataset used in subsection 3.1 is too small to call for tie point decimation, and as there is hardly any redundant
For example, if the overlap area is too small or if the sampled locations are close to the center of overlap, or if the errors are sampled in flat regions when there
