• Tidak ada hasil yang ditemukan

isprs archives XLI B3 261 2016

N/A
N/A
Protected

Academic year: 2017

Membagikan "isprs archives XLI B3 261 2016"

Copied!
7
0
0

Teks penuh

Loading

Gambar

Table 1. Basic technical parameters of FabScan scanner
Figure 4. Intersection of the beams inside the scanner (2D dimension)
Figure 5. Visual comparison analysis of the cloud of points resolution
Figure 6. Spongiform mascot of WAT university: a) photo of
+3

Referensi

Dokumen terkait

series The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences , was informed by the authors Wang Zheng and Liang Ti that they wish

The paper presents an approach to use object based image analysis (OBIA) combing high spatial resolution imagery and Lidar cloud points in order to refine objects

In this research paper the creation of 3D city model was carried out using aerial photos, oblique imagery with different GSD, in order to check the

KEY WORDS: Terrestrial Laser Scanning, Stem Detection, Cylinder Fitting, RANSAC, Self-adaptive Cylinder Growing, Point Cloud

If the points spacing of all interest features are much smaller than their profiles spacing and the profile spacing is stable during the scan, in the original RGPL (Nguyen et

KEY WORDS: terrestrial laser scanning, range noise, data resolution, joint roughness, wavelet transform, non-local mean, denoising

The basic assumption of the adopted camera calibration method was the correction of only a selected fragment of the image (i.e., the so-called

To find the next-best-view, it is necessary to localize where the topological model from Section 3.2 is incomplete, which implies that the reconstructed point cloud P still