DAFTAR PUSTAKA
[1] Zhou Y., Fan M, Chen L, Zhuang J. Lignocellulosic Fibre Mediated Rubber
Composites. Manuscript Submitted for Publication, 2015.
[2] Lu, Guang., Heping, Yu., Yongzhou, Wang., Yongyue, Luo., Zongqiang, Zeng. “Preparation and Mechanical Properties of Prevulcanized Natural Rubber Latex/Chitosan/Poly (3-hydroxybutyrate) Blends”. Asia-Pacific Energy Equipment Engineering Research Conference, AP3ER, 2015.
[3] Jong, Lei. “Influence of Protein Hydrolysis on the Mechanical Properties of Natural Rubber Composites Reinforced with Soy Protein Particles”. Industrial Crops and Products 65, 102-109, 2015.
[4] Zhou, Yonghui., Mizi, Fan., Lihui, Chen., Jiandong, Zhuang., “Lignocellulosic Fibre Mediated Rubber Composites”. Composites Part B, 2015.
[5] Hergenrother, Siwew. “Preparation of Nanocellulosic Material Organic Waste and Their Application, 2012.
[6] Chuayjuljit, S., Su-Uthai., C, Tunwattanaseree., S, Charuchinda. “Preparation of Microcrystalline Cellulose from Waste-Cotton Fabric for Biodegradability Enhancement of Natural Rubber Sheets”. Journal of Reinfoced Plastics and Composites, Vol. 28, No. 10, 2010.
[7] Hassan, Mohammad L. “Bagasse and Rice Straw Nanocellulosic Material and Their Applications”. Polymer Nanocomposites of Cellulose Nanoparticles, 2015.
[8] Guven, O., Karakas, F., Kaya, M.A., Yildirim, H., Celik, M.S. Composite Films Based on Styrene-Co-Butyl-Acrylate with Colemanite and Calcium Bentonite Mineral Fillers. Mechanics of Composite Material, Vol. 50, No.3, pp. 477-486, 2014.
[9] Tohsan, Atitaya., Ryota, Kishi., Yuko, Ikeda. A Model Filler Network in Nanocomposites Prepared by In Situ Silica Filling and Peroxide Cross-Linking in Natural Rubber Latex. Coloid Poymer Science. 2015.
[11] Ikawati., Melati. “Pembuatan Karbon Aktif dari Limbah Kulit Singkong UKM Tapioka Kabupaten pati”. Jurusan Teknik Kimia, Fakultas Teknik, Universitas Dipenogoro : Semarang.
[12] Aripin, Ashuvila Mohd., Angzzas Sari Mohd Kassim., Zawawi, Daud., Mohd, Zainuri Mohd Hatta. Comparison of Pineapple Leaf and Cassava Peel by Chemical Properties and Morphology Characterization. Advanced Materials Research, Vol. 974, p. 384-388, 2014.
[13] Bai, Wen., Kaichang, Li. “Partial Replacement of Silice with Microcrystalline Cellulose in Rubber Composites”. Composites : Part A, 40, 1597-1605, 2009. [14] Surya, I., Ismail, H., and Azura, A. R. “Alkanolamide as an accelerator, filler
dispersant and a plasticizer in silica-filled natural rubber compounds”. Polymer Testing 32(8) : 1313-1321. 2013.
[15] Prompunjai , Apusraporn., Waranyou, Sridach. Preparation and Some Mechanical Properties of Composite Material Made from Sawdust, Cassava Starch and Natural Rubber Latex. International Scholarly and Scientific Research & Innovation 4 (12), 2010.
[16] Sasidharan, K.K., Rani Joseph., Shiny Palaty., K.S. Gopalakrishnan., G. Rajamal., P. Viswanatha Pillai. Effect of the Vulacanization Time and Storage on the Stability and Physical Properties of Sulfur-Prevulcanized Natural Rubber Latex. Journal of Applied Polymer Science, Vol.97, 1804-1811. 2005 [17] Siagian, Ucok Wandi., Vonny Setiaries Johan., Usman Pato. “Pemanfaatan
Tepung Kulit Singkong Dalam Pembuatan Mi Sage Instan”. Fakultas Pertanian. Pekanbaru : Universitas Riau. 2013.
[18] Nurlaili, Fadhila., Suparwi., Tri Rahardjo Sutardi. “Fermentasi Kulit Singkong (Manihot utilissima Pohl) Menggunakan Aspergillus Niger Pengaruh Terhadap Kecernaan Bahan Kering (KBK) dan Kecernaan Bahan Organik (KBO) secara in-Vitro”. Fakultas Peternakan. Purwokerto : Universitas Jenderal Soedirman. 2014.
[19] Anggoro. Road Map Peningkatan Produksi Ubi kayu Tahun 2010-2014. “Direktorat Jenderal Tanaman Pangan Kementrian Pertanaian”. 2012.
on Chemical Characterization and Morphological Structures”. Advanced Materials Research, 911 : 331-335. 2014.
[21] Zulharmita., Siska Nola Dewi., Mahyuddin. Pembuatan Mikrokristalin selulosa dari Ampas Tebu (Saccharum officinarum L). Jurnal Sains dan Teknologi Farmasi, Vol.17, No.2. 2012.
[22] Effendi, Devia Bentia., Nurul Huda Rosyid., Asep Bayu Dani Nandiyanto., Ahmad Mudzakir. Review : Sintesis Nanoselulosa. Jurnal Integrasi Proses.Vol.5, No.2. Hal 61-74. 2015.
[23] Wirjosentono, B. 2015. “Preparasi Pembuatan Mikrokristalin selulosa dari Buah Kapuk”. Universitas Sumatera Utara. Medan.
[24] Ibrahim, Maha M., Waleed K, El-Zawawy., Yvonne Juttke., Andreas Koschella., Thomas Heinze. Cellulose and microcrystalline cellulose from rice straw and banana plant waste : preparation and charaterization. Springer Science 2013.
[25] Amalia, Suci. “Sintesis Senyawa Risinoleil Dietanolamida Melalui Reaksi Amidasi Asam Risinoleat Dengan Dietanolamina”. Jurusan Kimia. Malang. 2012.
[26] Wilpiszewska, kasrer. Microcrystalline Cellulose Reinforcement – properties and application. Journal of Applied Science, Vol. 21, 2014.
[27] Fachry, A. Rasyidi., Tuti Indah Sari., Bobi Andika Putra dan Dwi Aji Kristianto. “Pengaruh Penambahan Filler Kaolin Terhadap Elastisitas dan Kekerasan Produk Souvenir dari karet alam (hevea Brasiliensis)”. Jurusan Teknik Kimia. Pekanbaru : Universitas Brawijaya. 2012.
[28] Muis, Yugia. “Studi Pemanfaatan Bahan Pengemulsi Berbasis Minyak Kelapa Untuk Produk Film Lateks Pekat Karet Alam Dengan Agen Vulkanisasi Sulfur dan Dikumil Peroksida”. Program Doktor Ilmu Kimia. Medan : Universitas Sumatera Utara. 2011.
[29] Fachry, A., Rasyidi. Tuti Indah Sari., Sthevanie., Susi Susanti. “Pengaruh Filler Campuran Silika dan Kulit Kerang Darah Terhadap Sifat Mekanis Kompon Sol Sepatu dari Karet Alam”. Jurusan Teknik Kimia. Universitas Brawijaya. 2014. [30] Tampubolon, Harry Laksana., Darwis Syaifuddin Hutapea., Indra Surya.
Kekerasan Vulkanisat Karet Alam Berpengisi Silika”. Departemen Teknik Kimia. Medan : Universitas Sumatera Utara. 2012.
[31] Umar, Siproni. Taufikurrahman. “Rancangan Cetak Spesimen Uji Retak Lentur”. Jurusan Teknik Mesin. Palembang : Politeknik Negeri Sriwijaya. 2010.
[32] Sahly, Achmad Fariz. “Pembuatan Perekat Karet pada Logam Menggunakan Campuran Karet Siklo dan Karet Alam. Fakultas Teknologi Pertanian. Bogor : Institut Pertanian Bogor.
[33] Puspitasari, Santi. Hani Handayani dan Yoharmus Syamsu. “Pengaruh Jenis dan Konsentrasi Aditif Terhadap Karakteristik Faktis Coklat dari Minyak Jarak Pagar”. Bogor : Pusat Penelitian Karet. 2013.
[34] Yanti, Nengsi., Nirwana., Bahruddin. “Pengaruh Nisbah Compatibilizer MNR/MAPP dan Watu Pencampuran terhadap Morfologi dan Sifat Thermoplastic Vulcanizate Berbasis Karet Alam. Fakultas Teknik. Riau : Universitas Riau.
[35] Maulida. “Campuran Limbah Padat Organik Dan Anorganik Pulp Sebagai Bahan Pengisi Mikrokomposit Termoplastik Poliolefin”. Disertasi Doktor. Program Doktor Universitas Sumatera Utara, Medan. 2010.
[36] Sinuhaji, Alvina. “Pra Rancangan Pabrik Benang Karet dari Lateks dengan Kapasitas 4100 ton/bulan di kawasan Industri Medan Tanjung Morawa, Propinsi Sumatera Utara”. 2010
[37] Frida, Erna. “Penggunaan Anhidrida Maleat-Grafted-Polipropilena (AM-g-PP) dan Anhidrida Maleat-Grafted-Karet Alam (AM-g-KA) pada Termoplastik Elastomer (TPE) Berbasis Polipropilena, Kompon Karet Alam SIR-20 Dan Serbuk Ban Bekas. Program Doktor Ilmu Kimia
[38] Ali, Farida., M. Mezal R.D., Valencia Darmawan H. Pengaruh Penambahan Zeolit dan Kulit Kerang Darah Terhadap Sifat Mekanis Rubber Compound, Jurnal Teknik Kimia, No. 3, Vol. 20, 2014.
[39] Chandrasekaran. V.C. “Essential Rubber Formulary”. William Andrew Publishing. United States of America. 2007.
[41] Harahap, H., Baharin, A., and H. Rosamal.“Effect of Soaking In Curatives on the Morphology and Tensile Properties of NR Latex Films”, Malaysian Journal of Microscopy. 40 (5) : 205-216. 2007.
[42] Sae-Heng, Kewwarin, Noriaki Iso, Kenichiro Kosugi, Seiichi Kawahara. Prevulcanization of Isoprene Rubber Latex. Colloid Polym Sci, 2015.
[43] Sitorus, Antonius. “Penyediaan Film Mikrokomposit PVC menggunakan Pemlastis Stearin dengan Pengisi Pati dan Penguat Serat Alam”. Sekolah PascaSarjana, Universitas Sumatera Utara, 2009.
[44] Sunariyo. “Karakteristik Komposit Termoplastik Polipropilena Dengan Serat Sabut Kelapa Sebagai Pengganti Bahan Palet Kayu”. Tesis Magister, Sekolah Pascasarjana. Medan : Universitas Sumatera Utara. 2008.
[45] Septorini, Ragil. 2008. “Perbedaan Kadar Glukosa pada Onggok Yang Dihidrolisis dengan Asam Klorida, Asam Sulfat, dan Asam Oksalat”. Universitas Muhammadiyah, Semarang.
[46] Subagja, Bagus. 2011. “Pengaruh Variasi Perseb Berat Bi dan Pemberian Tekanan pada Parameter Kisi dan Ukuran Kristal Sistem Material Sn-Cu-Bi dan Sn-Cu”. Fakultas MIPA. Universitas Indonesia, Depok.
[47] Adisasmita, Sakti Adji., H.Nur Ali., A. Arwin Amiruddin., H. Iskandar Renta., “Studi Karakteristik Perkerasan HRS-WC Menggunakan Aspal Minyak dan Penambahan Aditif lateks”. Universitas Hasanuddin, 2012.
[48] Annisa, Maysarah Nurul., A.Rahim, Matondang., Rosnani, Ginting. Penerapan Metode Kano Untuk Peningkatan Mutu Produk Sarung Tangan karet. E-Journal Teknik Industri, pp. 67-71, 2014.
[49] Badan Koordinasi Penanaman Modal. 2007. “Peluang Investasi Industri Sarung Tangan Karet”. Badan Koordinasi Penanaman Modal (BKPM). Jakarta.
[50] Kamil, E., Khoesoema, E., dan Harahap, H. “Pengaruh Biodegradasi Dengan Teknik Penanaman Pada Produk Lateks Karet Alam Berpengisi Tepung Kulit Pisang Yang Diputihkan Dengan Hidrogen Peroksida”. Jurnal Teknik Kimia USU Vol. 1, No. 2. 2012.
Products Filled With Kaolin Modified Alkanolamide”. Journal of Asean ++ 2013 : Moving Forward. 2013.
[52] Chen, D., Lawton, D., Thompson, M, R., Liu, Q. Biocomposites Reinforced with Cellulose Nanocrystal Derived from Potato Peel Waste. Carbohydrate Polymers, 90, 709-716, 2012.
[53] Azubuike, Chukwuemeka P., Jimson O. Odulaja., Augustine O. Okhamafe. Physicotechnical, Spectroscopic and Thermogravimetric Properties of Powdered Cellulose and Microcrystalline Cellulose Derived From Groundnut Shells. Journal of Excipients and Food Chemical. 3. 2012.
[54] Endika, M. Farandi.. Modifikasi Pati Ketela Pohon Secara Kimia. Jurnal Rekayasa Proses. Vol.10. No. 2. 2013.
[55] Pavia, D.L., Lampman, G.M., and Kriz, G.S., Introduction To Spectroscopy : A Guide for Students of Organic Chemistry. Brooks/Cole Thomson Learning. Singapore. 2001.
[56] Merci, A., Urbano, A., Grossman, M.V.E., Tischer, C.A dan Mali, S., Properties of Microcrystalline Cellulose Extracted From Soybean Hulls By Reactive Extrusion. Food Research International. 2015.
[57] L. Segal, J.J Creely, A. E. Jr. Martin, dan C. M. Conrad. An Emperical Method for Estimating the Degree of Crystallnility of Native Cellulose using X-Ray Diffractometer, Tex. Res. J. 29, 768-794. 1959.
[58] Kenkare, D. B., and Robbins, C. R. “U.S. Patent No. 4,154,706”. Washington, DC : U.S. Patent and Trademark Office. 1979.
[59] Hadinatan, Kelvin. “Pengaruh Suhu Vulkanisasi Pada Pembuatan Produk Film
Lateks Karet Alam Berpengisi Tepung Kulit Singkong Termodifikasi
Penyerasi Alkanolamida”. Departemen Teknik Kimia. Universitas Sumatera
Utara : Medan.
[60] Sudari, A. K., A.A Shamsuri., E.S Zainudin dan P. M. Tahir. Exploration on
Compatibilizing Effect on Nonionic, Anionic and Cationic Surfactants on
Mechanical, Morphological, and Chemical Properties of High-Density
PolyEthlene/Low-Density Polyethlene/Cellulose Biocomposites. Journal of
[61] El-Sabbagh, S.H. dan A.A Yehia. Detection of Crosslink Density by Different
Methods for Natural Rubber Blended with SBR and NBR. Egypt J. Solids,
Vol.30. No. 2. 2007.
[62] Vert, 2007. Rubber Chemistry. www.tutu.fi. Diakses pada 14 November 2015. [63] Zhao, Fei., Weina Bi dan Shugao Zhao. Influence of Crosslink Density on
