isprs archives XLI B5 765 2016
Teks penuh
Gambar
Dokumen terkait
The exterior orientation of the idealized image was then extracted using ground control points coordinates determined automatically on the intensity image of the range camera
The comparison of 3D model generation and the volume calculation with TLS and SfM shows that errors occur within the procedure of data acquisition as well as the data
Relative Orientation: The motion of camera is with respect to the ETSP, and since the position and angles are obtained by space resection, the
For the volume of concrete estimation and thickness calculation, the signed distances from the initial to the successive point cloud were obtained using Cloud Compare.. In this
The paper describes the experience of using terrestrial laser scanning technology for the 3D documentation of historical monument known as the Bastion
The segmentation of the wood sculpture, the bolts and rivets, and the woodworm holes was performed with thresholding (Russ, 2002), but additional filters and corrections were
In order for the sensor platform to be tracked, the position of the targets within the constellation on its upper surface had to be The International Archives of
We have proposed a simple and real-time approach for the camera calibration, based on the vanishing points and the geometrical constraint of the lane marker
