isprs archives XLI B5 527 2016
Teks penuh
Gambar
Dokumen terkait
Tree height-dbh model residuals probably reduce the correlation between lidar canopy height indices and ground AGB reference, consequently introducing errors to
The comparison of 3D model generation and the volume calculation with TLS and SfM shows that errors occur within the procedure of data acquisition as well as the data
Once ground image point clouds have been generated, each corresponding airborne LiDAR point cloud of the target building is found and extracted by using GPS and imaging
The paper describes the experience of using terrestrial laser scanning technology for the 3D documentation of historical monument known as the Bastion
First, we have to mention, that there is a known reconstruction methodology based on traditional data sources (archive maps and aerial photographs, field measurements,
Two examples are presented here: a point cloud derived from Phantom 4 UAS images of the historic dock at Wormsloe; and second, the integration of aerial and terrestrial LiDAR
The developed algorithm should provide an accurate estimation of the camera external orientation for a given pair of reference points X 0, X 1, with known coordinates
The indoor mapping system of HCU Hamburg consists of the following components: laser range finder, panorama head (pan-tilt-unit), single-board computer (Raspberry Pi) with
