DAFTAR PUSTAKA
Abubakar, 2009.” Biodegradasi Bahan Komposit Polipropilena Dengan Pengisi Serat Limbah Padat ( Fibre Recovery ) Dari Pabrik Pulp dan Kertas. Tesis: FMIPA USU.
Adriana, 2011, “ Polimer Nanokomposit Berbasis Plastik Poliolefin dan Serat Nanoselulosa Tandan Kosong Kelapa Sawit Menggunakan Aditif Antistatik Untuk Bahan Teknik”, Proposal Disertasi, Program Doktor Ilmu Kimia FMIPA, USU.
Al Malaika. 1997. “Reaktif Modifier of Polimer” . Blackie Academic and Professional. London.
Ardizzone, S; Dioguardi, F. S; Mussini, T; Mussini, P. R; Rondinini, S; Vercelli, B; Vertova, A, 1999, “Microcrystalline Cellulose Powders: Structure, Surface, Features, and Water Sorption Capability”, Cellulose, Kluwer Academic Publishers: 57-69.
Azubuike, Chukweumeka.P.C., Okhamafe, Augustine.O., Falodun, abiodun. 2011.”
Some Pharma Copocial and diluent-Binder Properties of MaizeCob-derive
from α-cellulose in Selected Tablet Formulations”. Journal of Chemical and Pharmaceutical research. 481-488.
Badan Penelitian dan Pengembangan Pertanian, 2007, “Prospek dan Arah Pengembangan Agribisnis Kelapa”, Departemen Pertanian, Jakarta.
Benzad, Kord. 2011. “Influence of Maleic Anhydride on Flour reinforce Polypropylene Composite”. World Applied Science journal 12 (7) ; 1014-1016.
Belmares, H., Barrera, A., dan Monjaras, M, 1983,” New Composite Materials From Natural Hard Fibers, Part 2”. Fatigue Studies And a Novel Fatigue Degradation Model, Industrial Engineering Chemical Product Research and Development, 22: 643-652.
Bledzki, A.K., Gassan, J. 1999. “Composites Reinforced with Cellulose Based Fibers”. Prog. Polym. Sci. P 221-274.
Clemons, C. 2003. “Impact Toughness of Cellulose-Fiber Reinforced Polypropylene : Influence of Microstructure in Laminates and Injection Molded Composites”. Monona Terrace Community & Convention Center Madison : New York.
Das, Kunal., Ray, Dipa., Bandyopadhyay, N.R., Sengupta, Suparna, . 2010. “Study of The Properties of Microcrystalline Cellulose Particles from Different renewable Resources by XRD, FTIR, Nanoindentation, TGA and SEM”. Springer Science + Bussiness Media : 355-363.
D.R. Lu., C.M. Xiao.,S.J. 2009. “Starch-base Completely Biodegradable polymer material”. Express Polymer Letters Vol.3. No.6. 366-375.
Fengel, D.1995. “Kayu Kimia Ultrastruktur Reaksi-Reaksi”. Cetakan Pertama.UGM Press : Yogyakarta.
Han, G.S., and Shiiraishi, N. 1990. “Composites of Wood and Polipropylena IV”. Wood Research Sociaty at Tsubuka 36 (II) : 976-982.
Hartono, A. C. K., 1998. “Daur Ulang Limbah Plastik dalam Pancaroba. Diplomasi Ekonomi dan Pendidikan” . Dana Mitra Lingkungan . Jakarta.
Hidayani, Tengku Rahmi., 2012. “PembuatanN Komposit Biodegradable dari α -selulosa ampas tebu Bz 132 (Saccharum officinarum) dan Polipropilena dengan Menggunakan Polipropilena Tergrafting Maleat Anhidra dan Divinil Benzena Sebagai Agen Pengikat Silang”. Tesis. FMIPA USU.
Islam, M.R., and BEG, M.H.D. 2010. “Effect of Coupling Agent on Mechanical Proerties of Composite from Kenaf and Recycle Polypropylene”. National Conference Engineeing Reaserch and postgraduate Studies : 871-875.
Jahan, M. Sarwar., Saeed, Abrar., He, Zhibin., Ni, Yonghao. 2011. “ Jute Raw Material for The Preparation of Microcrystalline Sellulose”. Rusian Journal of Applied Chemistry, Vol 82, No 3, pp. 496-499.
Kalia, Susheel., Dufresne, Alain., Cherian, Bibin Mathew., Kaith, B.S.,Averous, Luc., Njuguna, James., Nasiopoulos, Elias. “Cellulose-Based Bio- and Nanocomposites: A Review”. International Journal of Polymer Science Volume 2011, Article ID 837875. 35 pages.
Kennedy, A.J. and Kelly, A. 1966. “Composite Materials”. Liif Books Ltd, London.
Khalil, H.P.S.Abdul., Alwani., M. Siti., Omar., A.K. Mohd. 2006. “Chemical Composition, Anatomy, Lignin Distribution and cellwall Structure of Malaysian Plant Waste Fibers”. Bioresources 1 (2): 220-231.
Laxmeshwar, Sandep S., Kumar, D.J. Madhu., Viveka, S., Nagaraja. G. K. 2012.” Preparation and Properties of Biodegradable Film Composit Using Modified Cellulose Fibre- Reinsforced with PVA”. International Scholarly Research Network ISRN Polymer Science Volume 2012, Article ID 154314, 8 pages.
Leppӓnen, Kirsi, Andersson, Seppo., Torkkeli, Mika., Knaapila, Matti., Kotelnikova, Nina., Serimaa., Ritva. 2009. “Structure of Cellulose and Microcrystalline Cellulose from Variouse Wood Species, Cotton and Flax Studied by X-Ray Scattering”. Springer Science, Cellulose 16: 999-1015.
Lubis, Misri Yanti. 2009. “Pembuatan Komposit Kayu Plastik dari Serat kayu Kelapa Sawit dan Polipropilena dengan Menggunakan Polipropilena yang di Modiifikasi dengan Asam Akrilat sebagai Penghubung”. Tesis: FMIPA USU.
Lu, D. R; Xiao, X. M; Xu, S. J, 2009, “Starch-Based Completely Biodegradable Polymer Materials”, eXPRESSPolymer Letters, Vol. 3, No. 6: 366 – 375.
Luo, S., dan Netravali, A.N., 1999, Mechanical and Thermal Properties of Envirnmentally Friendly “Green” Composites Made from Pineapple Leaf Fibers and Poly ( hydroxybutyrate-co-valerate ) Resin”. Polymer Composites,
20 (3) : 367-378.
Marpaung, Nalom Dahlan. 2011. “Pemanfaatan Selulosa dari Tandan Kosong Kelapa Sawit sebagai Bahan Pengisi Komposit Polietilena Densitas Rendah (LDPE)”. Tesis: FMIPA USU.
Maulida, A., Nasir, M.,dan Khalil, H.P.S.A. 2000. Hybrid Compositer Based on Natural Fiber, Proceedings of Symposium on Polymeric Materials”. Penang,
1-2.June 2000, Published By USM Presss, Penang., pp. 216-219.
Nourbakhsh, A., Ashori,A., Tabari, H. Ziaei., Rezaei, F. 2010. “Mechanical and Thermo-Chemical Properties of Wood-Flour / Polypropylene Blands” . polym.Bull Springer 65: 6971-700.
Ohwoavworhua, F.O., Adelakun, T.A. 2005.” Some physical Characteristic of Microcrystalline Cellulose Obtained from Raw Cotton of Cochlospermum Planchonii”. Tropical Journal of Pharmaceutical research, 501-507.
Ohwoavworhua, F.O., Adelakun, T.A. 2005.” Phosphoric Acid-Mediated Depolymerization and Decrystallization ofLOw Crystallinity Cellulose and Some Physicochemical Properties”. Tropical Journal of Pharmaceutical research, 509-516.
Oksman,K.2007. “Extrusion and Mechanical Properties of Highly Filled Cellulose Fibre-Polypropylene Composites.Division of Manufacturing and Design of Wood and Bionanocomposites”.Lulea University of Technology : Sweden.
Prastowo, B, (2007), “Potensi Sektor Pertanian Sebagai Penghasil dan Pengguna Energi Terbarukan”, Perspektif Vol. 6, No. 2: 84-92.
Pranamuda, H, 2011. “Pengembangan Bahan Plastik Biodegradabel Berbahan Baku Pati Tropis”. Badan Pengkajian dan Penerapan Teknologi : Jakarta.
Premasingam, 2000. “Sifat Kerintangan Api Bagi Komposit Hybrid Polipropilena Berasakan Gentian Kelapa sawit dan Gentian Kaca”. (Disertasi) By Pusat Pengkajian Teknologi Industri. Universitas Sains Malaysia.
Rajan, A; Senan, C. R; Pavithran, C; Emilia, T. A, 2005, ”Biosoftening of Coir Fiber Using Selected Microorganisms”, Bioprocess Biosyst Eng, 28: 165-173.
R, Premraj., and Doble, Mukesh. 2005.” Biodegradation of Polymers”. Indian Journal of Biotechnology Vol.4, pp 186-193.
Rohateri, Eli. 2009. “Karakterisasi Biodegradasi Polimer”, Jurdik Kimia FMIPA UNY.
Sinaga, Zulham Efendi. 2011. “Perbandingan Sifat Matriks komposit Polimer Selulosa Asetat Sintesis dan selulosa asetat komersial yang Divariasikan dengan Polipropilena sebagai Bahan Kemasan”. Tesis:FMIPA USU.
Thomas,G.V., Prabhu, S.R., Reeny,M.Z., Bopiah, B.M. 1998. ” Evaluation of Lignocellulosic Biomas from Coconut Palm as Substrate for Cultivation of Pleurotus Sajar-Caju (Fr) Singer”. Wood Journal of Microbiology and Biotechnology 14: 879-882.
Tsoumis, G, 1991, “ Science and Technology of Wood, Structure, Properties and Utilization”, Von Nostrand Reinhold, New York.
Wirjosentono, Basuki. 1996. “ Struktur dan Sifat Mekanis Polimer”. Intan Dirja Lela press.
Wirjosentono Basuki, Abdi Negara Sitompul, Sumarno, Tirena A. Siregar, Syamsul Bahri Lubis. 1995.” Analisis dan Karakterisasi Polimer”. USU – Press: Medan
.
Wang, Yu-Sheng., Byrd, Caroline. S., Barlaz, A. Marton. 1994. “Anaerobic Biodegradability of Cellulose and Hemicellulose in Excavated Refuse Sample Using a Biochemical Methane Potential Assay”. Journal of industrial Microbiology. 147-153.
Yakubu, A., Tanko, M.Umar., Sani, S.D. Mohammed. 2011. “Chemical Modification of Microcrystalline Cellulose : Improvement of Barrier Surface Properties to Enchance Surface Interaction with Some Synthetic polymers for Biodegradable Packaging Material Processing and Application in Textile, Food and Pharmaceutical Industry”. Pelagia Research Library, 2(6) : 532-540.
Yunus, Darwin Nasution.2011. “Fungsionalisasi Polipropilena Terdegradasi Menggunakan Benzoil Peroksida, Anhidrida Maleat dan Divinil benzene Sebagai Bahan Perekat Papan Partikel Kayu Kelapa Sawit”. Disertasi.Medan-USU.
Zhang, F. 2005. “Effect of Maleated Polypropylene on the Performance of
Polypropylene/cellulose Composite” .National Institute of Advanced Industrial Science and Technology : Takamatsu
