isprsannals II 3 W4 149 2015
Teks penuh
Garis besar
Dokumen terkait
The detection method for attitude perturbance based on parallax observation is adopted, while a novel approach of estimating the attitude perturbance angles from the
The approaches applied for this purpose were (i) to optimize the degree of filtration with respect to the field measurements, and (ii) to predict this degree by means of
Based on this medial axis as the centerline and the boundary of the classified road surface, reconstruction of its extent is achieved..
For checking visibility constraints, meaning to check which building elements are visible based on the rays from the cameras to the reconstructed points, a voxel grid with cells of
This paper reports an analysis conducted in order to investigate the measurement precision and accuracy of the centre location of an ellipse on a digital image by
weightings in the iterative process. The quality of the building model itself is also a limiting factor. Building in level-of-detail 1 are only block models. In these models,
In summary, with a higher value for the minimal variation the point variation test reduces the cell size down to its minimal allowed setting, so that the points are nearly spread
The work presented in this paper addresses two aspects: A.) the appearance of facade layover in the context of different signal in- cidence angles and signal polarizations and B.)
