this PDF file METHODOLOGY OF SITESPECIFIC SEISMIC HAZARD ANALYSIS FOR IMPORTANT CIVIL STRUCTURE | Irsyam | Civil Engineering Dimension 2 PB
Teks penuh
Gambar
Dokumen terkait
Despite the taller column at basement level, the open frame model does not show any soft-story mechanism, which means that if the infill wall at upper floor levels is
In my first Engineering Mechanics: Statics class in the Spring I semester, my students were well prepared and highly motivated, grasped fundamental concepts easily,
As can be observed from Table 3, in both test models, the initial crack of infill occurred at a drift of 0.08%, which can be stated as serviceability limit of this type of
The statistical model proposed in the present study using the spline nonparametric regression analysis, which is based on a large experimental database, resulted in fairly
Hasil penelitian menunjukkan penggunaan Silica Fume sebesar 2 % dan Glenium Ace-80 sebesar 2.5 % sudah mampu mencapai kriteria self compactible sekaligus kuat tekan awal (
So for fault and subduction sources both truncated exponential (GR) and characteristic models (char) are used with a weighting of 0.34 and 0.66, respectively A characteristic
Cyclic test results showed that the addition of nails improved the joint resistance, initial stiffness and hysteretic damping or the area enclosed by the loop. Significant
In terms of vertical displacement distribution, the distributions were similar in both static and dynamic-state conditions (Figure 5). It seems that the whole