However, they should be adapted as necessary to the circumstances of the particular procurement project. Bidder – Refers to a contractor, manufacturer, supplier, distributor and/or consultant who submits a bid in response to the requirements of the Tender Documents.
Invitation to Bid
A complete set of Tender Documents may be obtained from interested Bidders on 4th August 2022 from the address and website given below on payment of the applicable Tender Documents fee in accordance with the latest Instructions issued by GPPB, in the amount of twenty-five thousand pesos. Bids will be opened in the presence of representatives of bidders who choose to participate in the activity.
Instructions to Bidders
- Scope of Bid
- Funding Information
- Bidding Requirements
- Corrupt, Fraudulent, Collusive, and Coercive Practices 12
- Origin of Goods
- Subcontracts
- Pre-Bid Conference
- Clarification and Amendment of Bidding Documents
- Documents comprising the Bid: Eligibility and Technical Components
- Documents comprising the Bid: Financial Component
- Bid Prices
- Bid and Payment Currencies
- Bid Security
- Sealing and Marking of Bids
- Deadline for Submission of Bids
- Opening and Preliminary Examination of Bids
- Domestic Preference
- Post-Qualification
- Signing of the Contract
The price of the Goods quoted EXW (ex-works, ex-factory, ex-warehouse, ex-showroom or ready-made, as applicable); The preliminary examination of bids is governed by Section 30 of the 2016 Revised IRR of RA No.
Bid Data Sheet
12 The price of the Goods is quoted DDP in the city of Balanga, Bataan or the applicable International Commercial Terms (INCOTERMS) for this Project. The amount of not less than Php two percent (2%) of ABC) if the offer security is in cash, cashier's checks/manager's checks, bank drafts/guarantees or irrevocable letters of credit; or.
General Conditions of Contract
- Scope of Contract
- Advance Payment and Terms of Payment
- Performance Security
- Inspection and Tests
- Warranty
- Liability of the Supplier
Matters governing the Supplier's performance, payments under the Contract or matters affecting the parties' risks, rights and obligations under the Contract are included in the GCC and Special Conditions of Contract. 9184 and its revised IRR of 2016, including the Generic Procurement Manual and associated issuances, constitute the primary source of the terms and conditions of the Contract and are thus applicable upon contract implementation. Herein, clauses shall serve as the secondary source of the terms and conditions of the Contract.
Advance payment of the contract amount is stipulated in Appendix “D” of the Revised 2016 IRR in RA No. The contracting entity is authorized to determine the terms of payment for the partial or deferred delivery of the purchased goods, provided that such partial payment corresponds to the value of the delivered and accepted goods in accordance with applicable accounting and auditing rules and regulations. Within ten (10) calendar days after the bidder's receipt of the notice of award from the procuring entity, but in no case later than before the signature of the contract by both parties, the successful bidder shall furnish the performance bond in any of the forms prescribed in Section 39 of the 2016 Revised IRR of RA No.
The Procuring Entity shall notify the Supplier in writing, in a timely manner, of the identity of any representative retained for such purposes. To ensure that the manufacturing defects will be corrected by the Supplier, a warranty shall be required from the Supplier as provided in Section 62.1 of the 2016 Revised IRR of RA no. Supplier's liability under this Contract shall be as provided by the laws of the Republic of the Philippines.
Special Conditions of Contract
The risk and the right of ownership pass from the supplier to the client after receipt and final acceptance of the goods at the final destination." The Supplier will deliver the goods in accordance with the conditions set out in Section VI (List of Requirements). Supplier must provide all of the following services, including any additional services listed in Section VI.
The Supplier shall provide such packaging of the Goods as is necessary to prevent their damage or deterioration during transport to the final destination as specified in this Agreement. The size and weight of the packaging take into account, if necessary, the distance to the final destination of the goods and the absence of facilities for handling heavy loads at all points in transit. A packing list specifying the contents and quantities of the package should be placed in an accessible place on the outer packaging if practical.
Where the Supplier is required under the Contract to deliver the Goods CIF, CIP or DDP, the carriage of the Goods to the port of destination or other designated place of destination in the Philippines, as shall be specified in this Contract, shall be arranged and paid for by the Supplier , and its cost will be included in the Contract Price. When the Supplier is required under the contract to deliver the goods CIF, CIP or DDP, the goods must be transported on carriers of Philippine registry. The Supplier shall indemnify the Procuring Entity against all claims of third parties for infringement of patent, trademark or industrial design rights arising out of the use of the Goods or any part thereof.
Schedule of Requirements
Replace the outer layer of our proprietary less than five minutes, extending the life of the model. 34;Defibrillator with AED first aid wall mount cabinet with alarm, customized logo print and instruction manual. Readiness indicator in the upper right corner allows you to see if your AED is ready for rescue and ready for use.
Using an SD card you can recover event data and even update the device software. 34;•Repeat Button: A cardiac arrest can be a very stressful situation for the rescuer, trained or not, and it can be easy to miss one. Fully Automatic: Fully automatic, it will deliver the shock without user intervention, allowing the rescuer to focus fully on the CPR to be delivered.
31 The CE approved AED first aid wall storage cabinet with alarm is designed with rounded corners that are safer for people. The bending part of the bed leg is symmetrical, the angle is gentle and the bending angle is the same. 10、Two stainless steel rods (non-magnetic #304) on each side of the table for the patient to hold during labor pain.
Technical Specifications
Depending on the complexity of the goods and the repetition of the type of procurement, it may be beneficial to standardize the General Technical Specifications and include them in a separate subsection. The General Technical Specifications should cover all classes of workmanship, materials and equipment commonly involved in the manufacture of similar goods. The following clause may be inserted into the Special Conditions of Contract or the Technical Specifications.
Wherever reference is made in the Technical Specifications to specific standards and codes to be met by the goods and materials to be supplied or tested, the provisions of the latest edition or revision of the relevant standards and codes shall apply, unless otherwise expressly stated in the Contract. Reference to trade name and catalog number should be avoided as far as possible; where unavoidable they must always be followed by the words "or at least equivalent". Where appropriate, drawings, including site plans as required, may be furnished by the Procuring Entity with the Bidding Documents.
Similarly, the supplier may be asked to provide drawings or samples either with its bid or for prior assessment by the contracting authority during the performance of the contract. Tenderers are also required, as part of the technical specifications, to complete their Declaration of Conformity and demonstrate how the items conform to the specification. With an impressive IP rating of 55 and the defibrillator built into a carrying case, you can rest assured that no matter where the cardiac arrest occurred, you can be easily transported to the scene of the cardiac arrest and help save a person. cardiac arrest. to live.
7、The movement of the backrest up and down, the tilt of the bed surface forward and backward are controlled by the control hand wheel, which makes doctors and patients feel comfortable. 46 10、Two stainless steel rods (non-magnetic #304) on each side of the table for the patient to hold during labor pain.
Checklist of Technical and Financial Documents
2005, as finally reviewed and approved by the Bureau of Internal Revenue (BIR). f) Declaration by the potential bidder of all its current government and private contracts, including any contracts awarded but not yet started, whether or not similar in nature and complexity to the contract to be tendered; And. g) Statement of the Bidder's Single Largest Completed Contract (SLCC) similar to the contract to be bid for, except under the terms provided in Sections 23.4.1.3 and 23.4.2.4 of the 2016 Revised IRR of RA No. 9184, within the relevant period as provided in the offer documents; And. h) Original copy of Bid Security. If in the form of a letter of guarantee, also submit a certificate issued by the Insurance Commission;. Original copy of Notarized Bid Securing Declaration; And. i) Compliance with the technical specifications, which may include production/delivery schedule, required manpower and/or after-sales/parts, if applicable; and offered brand/samples, any brochures. j) Original duly signed Omnibus Affidavit (OSS);. and if applicable, original notarial secretary certificate in the case of a company, partnership or cooperative; or original special power of attorney of all members of the joint venture giving full authority and authority to its officer to sign the OSS and perform acts to represent the bidder.
If applicable, a duly signed joint venture agreement (JVA) if the joint venture already exists. duly certified statements from all potential joint venture partners stating that they will enter into and comply with the provisions of the JVA in the event that the bid is approved. Other Documentary Requirements under RA No. n) [For Foreign Bidders Claiming Due to Their Country's Extension of Reciprocal Rights to Filipinos] Certification from the appropriate government office in their country stating that Filipinos are permitted to participate in public procurement activities for the same good or product. o) Certification from DTI if the bidder claims preference as a domestic bidder or domestic entity.
